Properties of Al2O3/ZrO2 Composite Structural Thermal Barrier Coating Prepared by Plasma Spraying Method
摘 要
以NiCrAlY为金属黏结层材料、以Al2O3和ZrO2为陶瓷层材料,采用等离子喷涂技术在304不锈钢表面制备了3种热障涂层,通过扫描电子显微镜(SEM)和X射线衍射仪(XRD)分别对涂层的微观形貌和晶相进行了表征,并研究了涂层的抗高温氧化性能和抗热震性能。结果表明:NiCrAlY/Al2O3/ZrO2复合结构热障涂层表面无孔洞和裂纹等缺陷,高温氧化后该涂层主要包括Mg2Zr5O12和(Fe,Mg)(Cr,Fe)2O4两种晶相;由于Al2O3的阻氧作用,NiCrAlY/Al2O3/ZrO2涂层具有最佳的抗高温氧化性能;NiCrAlY/ZrO2涂层层间材料的热膨胀系数呈梯度变化,表现出最佳的抗热震性能。
Abstract
Three kinds of thermal barrier coating were prepared on the surface of 304 stainless steel by plasma spraying method with NiCrAlY served as metal bonding layer material and Al2O3 and ZrO2 served as the ceramic layer materials. The microscopic morphology and crystalline phase of the coating was characterized by scanning electron microscope (SEM) and X-ray diffractometer (XRD). The high temperature oxidation resistance and thermal shock resistance of the coating were also studied. The results show that NiCrAlY/Al2O3/ZrO2 composite structural thermal barrier coating surface did not have any hole and crack, and there were Mg2Zr5O12 and (Fe, Mg) (Cr, Fe)2O4 crystalline phase in the coating after high temperature oxidation. NiCrAlY/ZrO2 coating had the best high temperature oxidation resistance because of the oxygen barrier effect of Al2O3. The thermal expansion coefficient of interlayer material in NiCrAlY/ZrO2 coating had a gradient trend and the coating exhibited the best thermal shock resistance.
中图分类号 TG174 DOI 10.11973/jxgccl201711012
所属栏目 材料性能及应用
基金项目 重庆市研究生科研创新项目(CYS16238);全军后勤科研计划重点项目(BX110C016)
收稿日期 2017/5/24
修改稿日期 2017/10/8
网络出版日期
作者单位点击查看
备注杨宏波(1990-),男,湖北黄冈人,硕士研究生
引用该论文: YANG Hongbo,LIU Zhaohui,YI Tongbin,LIU Na,SHU Xin,LUO Ping. Properties of Al2O3/ZrO2 Composite Structural Thermal Barrier Coating Prepared by Plasma Spraying Method[J]. Materials for mechancial engineering, 2017, 41(11): 63~67
杨宏波,刘朝辉,易童彬,刘娜,舒心,罗平. 等离子喷涂制备Al2O3/ZrO2复合结构热障涂层的性能[J]. 机械工程材料, 2017, 41(11): 63~67
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张文毓. 热障涂层的研究进展[J]. 全面腐蚀控制,2015, 29(10): 11-14.
【2】李学娇, 张骋,张娜. 热障涂层研究进展[J].中国陶瓷, 2013, 49(3): 1-5.
【3】BEHNAMIAN Y, MOSTAFAEI A, KOHANDEHGHAN A, et al. A comparative study of oxide scales grown on stainless steel and nickel-based superalloys in ultra-high temperature supercritical water at 800℃[J]. Corrosion Science, 2016, 106: 188-207.
【4】张燕,张行,刘朝辉,等. 热喷涂技术与热喷涂材料的发展现状[J]. 装备环境工程,2013, 10(3):59:-64.
【5】王引真, 孙永兴. 涂层结构对等离子喷涂陶瓷涂层抗热震性的影响[J]. 机械工程材料, 1999, 23(4): 28-30.
【6】王世兴, 袁涛, 詹华, 等. 不同结构等离子喷涂热障涂层的性能研究[J]. 表面技术, 2013, 42(1): 21-24.
【7】SANG O C, OHMORI A. Microstructures of ZrO2-8wt.% Y2O3, coatings prepared by a plasma laser hybrid spraying technique[J]. Surface & Coatings Technology, 2002, 153(2/3):304-312.
【8】张罡, 武颖娜, 梁勇, 等. 等离子喷涂Al2O3与ZrO2复合热障涂层的高温性能[J]. 稀有金属材料与工程, 2003, 32(9):756-760.
【9】马壮,曲文超,李智超. 热化学反应喷涂Al2O3基复合陶瓷涂层的制备及其性能[J]. 中国有色金属学报,2009,19(6):1093-1099.
【10】潘兆义, 李护林, 何斌. 氧化锆热障涂层的组织和性能研究[J]. 火箭推进, 2013, 39(6): 48-54.
【11】贾胜凯, 邹勇, 徐计元, 等. TiO2 含量对等离子喷涂Al2O3 热障涂层性能的影响[J]. 中国有色金属学报(英文版), 2015, 25(1): 175-183.
【12】刘腾彬, 王泽华, 方学锋, 等. 铝基体喷涂Al2O3-TiO2/NiCoCrAIY系梯度涂层的抗热震性能[J]. 机械工程材料, 2006, 30(12): 19-23.
【13】王东生,田宗军,王泾文,等. 激光重熔等离子喷涂Al2O3-13%TiO2陶瓷涂层热震性能[J]. 应用激光,2010, 30(4):264-269.
【14】王超, 宋仁国. 等离子喷涂纳米Al2O3/TiO2陶瓷复合涂层高温氧化和热震性能研究[J]. 材料热处理技术,2012, 41(14):45-47.
【2】李学娇, 张骋,张娜. 热障涂层研究进展[J].中国陶瓷, 2013, 49(3): 1-5.
【3】BEHNAMIAN Y, MOSTAFAEI A, KOHANDEHGHAN A, et al. A comparative study of oxide scales grown on stainless steel and nickel-based superalloys in ultra-high temperature supercritical water at 800℃[J]. Corrosion Science, 2016, 106: 188-207.
【4】张燕,张行,刘朝辉,等. 热喷涂技术与热喷涂材料的发展现状[J]. 装备环境工程,2013, 10(3):59:-64.
【5】王引真, 孙永兴. 涂层结构对等离子喷涂陶瓷涂层抗热震性的影响[J]. 机械工程材料, 1999, 23(4): 28-30.
【6】王世兴, 袁涛, 詹华, 等. 不同结构等离子喷涂热障涂层的性能研究[J]. 表面技术, 2013, 42(1): 21-24.
【7】SANG O C, OHMORI A. Microstructures of ZrO2-8wt.% Y2O3, coatings prepared by a plasma laser hybrid spraying technique[J]. Surface & Coatings Technology, 2002, 153(2/3):304-312.
【8】张罡, 武颖娜, 梁勇, 等. 等离子喷涂Al2O3与ZrO2复合热障涂层的高温性能[J]. 稀有金属材料与工程, 2003, 32(9):756-760.
【9】马壮,曲文超,李智超. 热化学反应喷涂Al2O3基复合陶瓷涂层的制备及其性能[J]. 中国有色金属学报,2009,19(6):1093-1099.
【10】潘兆义, 李护林, 何斌. 氧化锆热障涂层的组织和性能研究[J]. 火箭推进, 2013, 39(6): 48-54.
【11】贾胜凯, 邹勇, 徐计元, 等. TiO2 含量对等离子喷涂Al2O3 热障涂层性能的影响[J]. 中国有色金属学报(英文版), 2015, 25(1): 175-183.
【12】刘腾彬, 王泽华, 方学锋, 等. 铝基体喷涂Al2O3-TiO2/NiCoCrAIY系梯度涂层的抗热震性能[J]. 机械工程材料, 2006, 30(12): 19-23.
【13】王东生,田宗军,王泾文,等. 激光重熔等离子喷涂Al2O3-13%TiO2陶瓷涂层热震性能[J]. 应用激光,2010, 30(4):264-269.
【14】王超, 宋仁国. 等离子喷涂纳米Al2O3/TiO2陶瓷复合涂层高温氧化和热震性能研究[J]. 材料热处理技术,2012, 41(14):45-47.
相关信息