Design and Application of Tensile Testing Device Used for Contact Assemblies in Earthing Switches
摘 要
针对某公司关键零部件接地开关中触头装配的结构和表面处理工艺,对SANS CMT5205型微机控制万能试验机进行改造升级,设计出了适用于该触头装配的拉伸试验装置。结果表明:该拉伸试验装置满足触头装配的黏接性能测试,不仅能够应用于触头装配的前期开发试验,得到极限黏接强度数据,而且在后期触头装配的例行力学性能检测试验中也得到了广泛应用;该装置满足对触头装配拉伸试验考核及质量评价的要求,扩展了试验机的使用功能。
Abstract
Considering the structure and surface treatment process of the contact assemblies in earthing switches which were key parts of a company, a tensile testing device suitable for the contact assemblies was designed and developed by updating and upgrading the SANS CMT5205 microcomputer controlled universal testing machine. The results show that the tensile testing device met the requirements of bonding property test of the contact assemblies and could be applied to the pre-development test of the contact assemblies to obtain the ultimate bonding strength data. And the device was also widely used in the later routine mechanical performance test of contact assemblies. The tensile testing device met the requirements of tensile test assessment and quality evaluation of the contact assemblies, and extended the use function of the testing device.
中图分类号 TH87 DOI 10.11973/lhjy-wl201712010
所属栏目 试验设备及应用
基金项目 国家电网平高集团科技资助项目(PGKD2017-056)
收稿日期 2017/8/31
修改稿日期
网络出版日期
作者单位点击查看
备注史润军(1980-),工程师,主要从事气体绝缘金属封闭开关设备与质量控制研究工作
引用该论文: SHI Runjun,SUN Mingdao,WANG Xiaosheng. Design and Application of Tensile Testing Device Used for Contact Assemblies in Earthing Switches[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(12): 894~896
史润军,孙明道,王晓生. 用于接地开关中触头装配的拉伸试验装置设计与应用[J]. 理化检验-物理分册, 2017, 53(12): 894~896
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王斌,兰雄侯. 中国材料试验设备市场分析[J]. 理化检验-物理分册,2016,52(8):516-518.
【2】GB/T 228.1-2010 金属材料 拉伸试验 第1部分:室温试验方法[S].
【3】黄星,谢宏. 从拉伸试验机控制角度理解GB/T 228.1-2010的技术变动[J]. 理化检验-物理分册,2014,50(2):97-100.
【4】GB/T 3098.1-2010 紧固件机械性能螺栓、螺钉和螺柱[S].
【5】曹晶晶,袁鹏斌,付春兵. 高强度钢拉伸试验液压夹具改进[J]. 理化检验-物理分册,2016,52(8):524-526,529.
【6】成大先. 机械设计手册(第4卷)[M]. 北京:化学工业出版社,2008.
【2】GB/T 228.1-2010 金属材料 拉伸试验 第1部分:室温试验方法[S].
【3】黄星,谢宏. 从拉伸试验机控制角度理解GB/T 228.1-2010的技术变动[J]. 理化检验-物理分册,2014,50(2):97-100.
【4】GB/T 3098.1-2010 紧固件机械性能螺栓、螺钉和螺柱[S].
【5】曹晶晶,袁鹏斌,付春兵. 高强度钢拉伸试验液压夹具改进[J]. 理化检验-物理分册,2016,52(8):524-526,529.
【6】成大先. 机械设计手册(第4卷)[M]. 北京:化学工业出版社,2008.
相关信息