Effects of Grain Boundary Engineering on the Corrosion Performance of Incoloy 800H in FLiNaK Melted at 850℃
摘 要
为了评价晶界工程(GBE)对800H合金在850℃ FLiNaK熔盐中腐蚀行为的影响,对GBE 800H和800H合金分别在850℃ FLiNaK中进行了100 h静态腐蚀试验。应用扫描电子显微镜/能谱仪(SEM/EDS)、聚焦离子束/扫描电镜/能谱仪(FIB/SEM/EDS)、高精度天平测量了质量变化和微区成分变化,观察了腐蚀形貌,并分析了腐蚀机制和过程。结果表明:FLiNaK熔盐主要沿晶界向基体渗透;GBE 800H合金的腐蚀深度和FLiNaK沿晶界的渗透深度都小于800H合金的。
Abstract
To evaluate the effects of grain boundary engineering (GBE) on the corrosion performance of Incoloy 800H in FLiNaK melted at 850℃, GBE 800H alloy and 800H alloy were tested in static molten FLiNaK at 850℃ for 100 hours, respectively. SEM/EDS, FIB/SEM/EDS and electro-reading balance were used to measure the weight loss and micro-area element changes and observe corrosive morphology. The corrosion mechanism and process were analyzed. The results show that FLiNaK remarkably penetrated through grain boundaries; the corrosion depth and FLiNaK penetration through the grain boundaries of GBE 800H alloy are smaller than those of 800H alloy.
中图分类号 TL172 DOI 10.11973/fsyfh-201801006
所属栏目 试验研究
基金项目
收稿日期 2016/7/10
修改稿日期
网络出版日期
作者单位点击查看
联系人作者聂书红(nsh968@sina.com)
引用该论文: NIE Shuhong,LIANG Zhengqiang. Effects of Grain Boundary Engineering on the Corrosion Performance of Incoloy 800H in FLiNaK Melted at 850℃[J]. Corrosion & Protection, 2018, 39(1): 29
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】SOUTHWORTH F H,MCDONALD P E. The next generation nuclear power plant (NGNP) project[R]. Idaho:National Engineering and Eviromental INEEL/CON-03-01150 Labratory,2003.
【2】HARDER B R,LONG G,STANAWAY W P. Compatibility and processing problems in the use of molten uranium chloride-alkali chloride mixtures as reactor fuels[J]. Nucl Metall,1969,15(1):405-410.
【3】JAMES E P,STEVEN K S,WILLIAM J K. Heat storage and transfer for solar energy[R].[S.l.]:Proceedings of Solar Forum,2001.
【4】WILLIAMS D F. Technical report ORNL/TM-2006/12[R]. Oak Ridge:Oak Ridge National Laboratory,2006.
【5】刘可,徐良,刘哲,等. 不同温度FLiNaK熔盐对Hastelloy-N合金腐蚀的影响[J]. 核技术,2015,38(2):63-70.
【6】徐雅欣,曾潮流. 熔盐电堆的材料腐蚀[J]. 中国腐蚀与防护学报,2014,34(3):211-217.
【7】DAVIS C H,OH R B,BARNER S R. Thermal-hydraulic analyses of heat transfer fluid requirements and characteristics for coupling a hydrogen production plant to a high-temperature nuclear reactor[R]. Idaho:Idaho National Laboratory,2005.
【8】WILLIAMS D F. Assessment of candidate molten salt coolants for the NGNP/NHI heat transfer loop[R]. Oak Ridge:Oak Ridge National Laboratory,2006.
【9】WRIHGHT R,SIMPSON J,WERTSCHING A,et al. High temperature behavior of candidate VHTR heat exchanger alloys[C]//Fourth International Topical Meeting on High Temperature Reactor Technology.[S.l.]:[s.n.],2008.
【10】WILLIAMS D.WILSON D. Coolant/Material interactions in advanced reactor system[R].[S.l.]:American Nuclear Sociaty Winter Meeting,2003.
【11】WILLIAMS D,TOTH L. Assessment of candidate molten salt coolants for advanced high temperature reactor[R].[S.l.]:Offoce of Scientific & Technical lnformation Tecjnical Report,2006.
【12】OLSON L C,AMBROSEK J W,SRIDHARAN K,et al. Materials corrosion in molten LiF-NaF-KF salt[J]. Journal of Fluorine Chemistry,2009,130(1):67-73.
【13】PAN Y,ADAMS B L,OLSON T,et al. Grain-boundary structure effects on intergranular stress corrosion cracking of alloy X-750[J]. Acta Materialia,1996,44(12):4685-4695.
【14】MISRA A K,WHITTENBERGER J D. Fluoride salts and container materials for thermal energy storage applications in the temperature range 973-1400 K[C]//Intersociety Energy Conversion Engineering Conference. IECEC'87.[S,l.]:[s.n.],1987:188-201.
【15】MISRA A K,DANIEL W J. Fluoride salts and container materials for thermal energy storage applications in the temperature range 973-1400K[R].[S.l.]:NASA Technical Memorandum89913 AIAA-87-9226,1987.
【16】中国腐蚀与防护学会《金属腐蚀手册》委员会. 金属腐蚀手册[M]. 上海:上海科学技术出版社,1987.
【17】中国腐蚀与防护学会. 金属的局部腐蚀:点腐蚀·缝隙腐蚀·晶间腐蚀·成分选择性腐蚀[M]. 北京:化学工业出版社,1995.
【2】HARDER B R,LONG G,STANAWAY W P. Compatibility and processing problems in the use of molten uranium chloride-alkali chloride mixtures as reactor fuels[J]. Nucl Metall,1969,15(1):405-410.
【3】JAMES E P,STEVEN K S,WILLIAM J K. Heat storage and transfer for solar energy[R].[S.l.]:Proceedings of Solar Forum,2001.
【4】WILLIAMS D F. Technical report ORNL/TM-2006/12[R]. Oak Ridge:Oak Ridge National Laboratory,2006.
【5】刘可,徐良,刘哲,等. 不同温度FLiNaK熔盐对Hastelloy-N合金腐蚀的影响[J]. 核技术,2015,38(2):63-70.
【6】徐雅欣,曾潮流. 熔盐电堆的材料腐蚀[J]. 中国腐蚀与防护学报,2014,34(3):211-217.
【7】DAVIS C H,OH R B,BARNER S R. Thermal-hydraulic analyses of heat transfer fluid requirements and characteristics for coupling a hydrogen production plant to a high-temperature nuclear reactor[R]. Idaho:Idaho National Laboratory,2005.
【8】WILLIAMS D F. Assessment of candidate molten salt coolants for the NGNP/NHI heat transfer loop[R]. Oak Ridge:Oak Ridge National Laboratory,2006.
【9】WRIHGHT R,SIMPSON J,WERTSCHING A,et al. High temperature behavior of candidate VHTR heat exchanger alloys[C]//Fourth International Topical Meeting on High Temperature Reactor Technology.[S.l.]:[s.n.],2008.
【10】WILLIAMS D.WILSON D. Coolant/Material interactions in advanced reactor system[R].[S.l.]:American Nuclear Sociaty Winter Meeting,2003.
【11】WILLIAMS D,TOTH L. Assessment of candidate molten salt coolants for advanced high temperature reactor[R].[S.l.]:Offoce of Scientific & Technical lnformation Tecjnical Report,2006.
【12】OLSON L C,AMBROSEK J W,SRIDHARAN K,et al. Materials corrosion in molten LiF-NaF-KF salt[J]. Journal of Fluorine Chemistry,2009,130(1):67-73.
【13】PAN Y,ADAMS B L,OLSON T,et al. Grain-boundary structure effects on intergranular stress corrosion cracking of alloy X-750[J]. Acta Materialia,1996,44(12):4685-4695.
【14】MISRA A K,WHITTENBERGER J D. Fluoride salts and container materials for thermal energy storage applications in the temperature range 973-1400 K[C]//Intersociety Energy Conversion Engineering Conference. IECEC'87.[S,l.]:[s.n.],1987:188-201.
【15】MISRA A K,DANIEL W J. Fluoride salts and container materials for thermal energy storage applications in the temperature range 973-1400K[R].[S.l.]:NASA Technical Memorandum89913 AIAA-87-9226,1987.
【16】中国腐蚀与防护学会《金属腐蚀手册》委员会. 金属腐蚀手册[M]. 上海:上海科学技术出版社,1987.
【17】中国腐蚀与防护学会. 金属的局部腐蚀:点腐蚀·缝隙腐蚀·晶间腐蚀·成分选择性腐蚀[M]. 北京:化学工业出版社,1995.
相关信息