Corrosion Behavior of the Friction Stir Weld of 2024 Aluminum Alloy in Salt Solution
摘 要
采用全浸泡法对2024铝合金母材与搅拌摩擦焊接接头在3.5%盐水环境中的腐蚀性能进行了测试,并对腐蚀速率进行了计算,对腐蚀形貌进行了观察。结果表明:腐蚀由点蚀开始,最后发展为剥落腐蚀;搅拌摩擦焊接(FSW)接头上各区的腐蚀速率大小为热影响区和焊核区 > 热机影响区 > 母材区。搅拌摩擦焊焊缝的腐蚀速率高于母材的,即其耐蚀性与母材相比变差。
Abstract
The full immersion etching method was utilized to study the corrosion properties of the base material and friction stir weld (FSW) of 2024 aluminum alloy in salt solution environment. The corrosion rate was calaulated and the corrosion morphology was observed. The results show that the corrosion started from pitting and finally became exfoliation corrosion. The corrosion rate on different narrow areas of weld joint followed the rule:heat affected area and welding area > thermo-mechanically affected zone > base area. The corrosion rate of the FSW weld was faster than that of base material and the corrosion resistance of FSW weld was worse than that of base material.
中图分类号 TB304 DOI 10.11973/fsyfh-201801009
所属栏目 试验研究
基金项目
收稿日期 2016/7/30
修改稿日期
网络出版日期
作者单位点击查看
联系人作者王希靖(Wangxj@lut.cn)
引用该论文: WANG Xijing,MA Xiaofei,ZHANG Jinyin,WEI Xueling. Corrosion Behavior of the Friction Stir Weld of 2024 Aluminum Alloy in Salt Solution[J]. Corrosion & Protection, 2018, 39(1): 45
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】黄伯云,李成功,石开力,等. 有色金属材料手册(上)[M]. 北京:化学工业出版社,2009:109.
【2】FERRER K S,KELLY R G. Comparison of methods of removal of corrosion products from AA2024-T3[J]. Corrosion,2001,57(2):110-117.
【3】傅文元. 铝及铝合金的焊接[J]. 造船技术,1992(4):33-40.
【4】黄华,董仕杰,刘静. 先进的搅拌摩擦焊技术[J]. 有色金属,2006,58(1):60-62.
【5】贺地求,邓航,周鹏展. 2219厚板搅拌摩擦焊组织及性能分析[J]. 焊接学报,2007(9):13-16,113.
【6】秦国梁,张坤,张文斌,等. 6013-T4铝合金薄板搅拌摩擦焊热输入对焊缝成形及组织性能的影响[J]. 焊接学报,2010,11:5-8,113.
【7】NANDAN R,DEBROY T,BHADESHIA H K D H. Recent advances in friction-stir welding-process,weldment structure and properties[J]. Progress in Materials Science,2008,53(6):980-1023.
【8】REYNOLDS A P. Flow visualization and simulation in FSW[J]. Scripta Materialia,2008,58(5):338-342.
【9】COLLIGAN K J,MISHRA R S. A conceptual model for the process variables related to heat generation in friction stir welding of aluminum[J]. Scripta Materialia,2008,58(5):327-331.
【10】鲁元曙,左卫,王玉龙. 海洋性气候电子设备铝合金结构腐蚀防护研究[J]. 装备环境工程,2008,5(3):71-75.
【11】栾国红,付瑞东,董春林,等. 中性盐雾下7075铝合金搅拌摩擦焊焊缝的腐蚀行为[J]. 中国腐蚀与防护学报,2010(3):236-240.
【12】何建平,高亚东,樊蔚勋,等. 评估航空铝合金剥蚀性能新方法的研究[J]. 腐蚀科学与防护技术,2003,15(1):18-20.
【13】RAJAKUMAR S,MURALIDHA C,RAN V. Establishing empirical relationships to predict grain size and tensile strength of friction stir welded AA 6061-T6 aluminium alloy joints[J]. Transactions of Nonferrous Metals Society of China,2010(10):1863-1872.
【14】张津,李峰,郑林,等. 2024-T351铝合金搅拌摩擦焊焊件内部残余应力测试[J]. 机械工程学报,2013,49(2):28-34.
【15】HOSNI E A,EL-HOUDF S. A study on the corrosion behavior of aluminum alloys in sea-water[J]. Materials and Design,2008(29):801-805.
【16】苏景新,张昭,曹发和,等. 铝合金的晶间腐蚀与剥蚀[J]. 中国腐蚀与防护学报,2005(3):187-192.
【17】李久青,屠益东,肖珩,等. 船用铝镁合金剥落腐蚀机理的研究[J]. 材料保护,1994(4):1-4,48.
【18】刘永辉,张佩芬. 金属腐蚀学原理[M]. 北京:航空工业出版社,1993:27-28.
【2】FERRER K S,KELLY R G. Comparison of methods of removal of corrosion products from AA2024-T3[J]. Corrosion,2001,57(2):110-117.
【3】傅文元. 铝及铝合金的焊接[J]. 造船技术,1992(4):33-40.
【4】黄华,董仕杰,刘静. 先进的搅拌摩擦焊技术[J]. 有色金属,2006,58(1):60-62.
【5】贺地求,邓航,周鹏展. 2219厚板搅拌摩擦焊组织及性能分析[J]. 焊接学报,2007(9):13-16,113.
【6】秦国梁,张坤,张文斌,等. 6013-T4铝合金薄板搅拌摩擦焊热输入对焊缝成形及组织性能的影响[J]. 焊接学报,2010,11:5-8,113.
【7】NANDAN R,DEBROY T,BHADESHIA H K D H. Recent advances in friction-stir welding-process,weldment structure and properties[J]. Progress in Materials Science,2008,53(6):980-1023.
【8】REYNOLDS A P. Flow visualization and simulation in FSW[J]. Scripta Materialia,2008,58(5):338-342.
【9】COLLIGAN K J,MISHRA R S. A conceptual model for the process variables related to heat generation in friction stir welding of aluminum[J]. Scripta Materialia,2008,58(5):327-331.
【10】鲁元曙,左卫,王玉龙. 海洋性气候电子设备铝合金结构腐蚀防护研究[J]. 装备环境工程,2008,5(3):71-75.
【11】栾国红,付瑞东,董春林,等. 中性盐雾下7075铝合金搅拌摩擦焊焊缝的腐蚀行为[J]. 中国腐蚀与防护学报,2010(3):236-240.
【12】何建平,高亚东,樊蔚勋,等. 评估航空铝合金剥蚀性能新方法的研究[J]. 腐蚀科学与防护技术,2003,15(1):18-20.
【13】RAJAKUMAR S,MURALIDHA C,RAN V. Establishing empirical relationships to predict grain size and tensile strength of friction stir welded AA 6061-T6 aluminium alloy joints[J]. Transactions of Nonferrous Metals Society of China,2010(10):1863-1872.
【14】张津,李峰,郑林,等. 2024-T351铝合金搅拌摩擦焊焊件内部残余应力测试[J]. 机械工程学报,2013,49(2):28-34.
【15】HOSNI E A,EL-HOUDF S. A study on the corrosion behavior of aluminum alloys in sea-water[J]. Materials and Design,2008(29):801-805.
【16】苏景新,张昭,曹发和,等. 铝合金的晶间腐蚀与剥蚀[J]. 中国腐蚀与防护学报,2005(3):187-192.
【17】李久青,屠益东,肖珩,等. 船用铝镁合金剥落腐蚀机理的研究[J]. 材料保护,1994(4):1-4,48.
【18】刘永辉,张佩芬. 金属腐蚀学原理[M]. 北京:航空工业出版社,1993:27-28.
相关信息