Foaming Reason Analysis on High Density Polyethylene Plastic Buckets
摘 要
用于盛装三氯乙酰氯溶液的高密度聚乙烯塑料桶桶身在短时间内出现起泡现象,根据高密度聚乙烯塑料桶的用途和结构特点,采用红外光谱仪、X射线衍射仪、热分析仪等多种仪器设备对该高密度聚乙烯塑料桶的起泡原因进行了分析。结果表明:高密度聚乙烯塑料桶起泡与塑料桶中含有碳酸钙成分直接相关,桶内盛装的三氯乙酰氯及其水解产物与桶自材料中的碳酸钙发生化学反应是导致其起泡的主要原因。
Abstract
The high-density polyethylene plastic buckets used for containing trichloroacetyl chloride solution foamed in a short time at the bucket body. According to the usage and structural characteristics of the high density polyethylene plastic buckets, they were analyzed by infrared spectrometer, X-ray diffractometer, thermal analyzer and other equipments. The results show that the foaming of the high density polyethylene plastic buckets was directly related to the calcium carbonate composition in the material of the plastic buckets. That the trichloroacetyl chloride contained in the bucket and its hydrolyzed products reacted with calcium carbonate in the material of the plastic buckets was the main cause for the foaming.
中图分类号 TQ320 DOI 10.11973/lhjy-wl201802015
所属栏目 质量控制与失效分析
基金项目
收稿日期 2017/3/2
修改稿日期
网络出版日期
作者单位点击查看
备注张岩(1985-),女,工程师,硕士,主要从事化工产品质量司法鉴定工作,a410290896@126.com
引用该论文: ZHANG Yan,CHEN Xudong,HONG Song. Foaming Reason Analysis on High Density Polyethylene Plastic Buckets[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2018, 54(2): 145~147
张岩,陈旭东,洪松. 高密度聚乙烯塑料桶起泡原因分析[J]. 理化检验-物理分册, 2018, 54(2): 145~147
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】许闵建. 避免塑料制品在正常使用期内失效的研究[D]. 无锡:江南大学,2008.
【2】黄泽雄. 最新塑料制品设计的发展趋势[J]. 国外塑料,2005,23(12):77.
【3】GB/T 6040-2002红外光谱分析方法通则[S].
【4】GB/T 3286.1-2012石灰石及白云石化学分析方法第1部分:氧化钙和氧化镁含量的测定络合滴定法和火焰原子吸收光谱法[S].
【2】黄泽雄. 最新塑料制品设计的发展趋势[J]. 国外塑料,2005,23(12):77.
【3】GB/T 6040-2002红外光谱分析方法通则[S].
【4】GB/T 3286.1-2012石灰石及白云石化学分析方法第1部分:氧化钙和氧化镁含量的测定络合滴定法和火焰原子吸收光谱法[S].
相关信息