Application of Laser Diameter Measurement and Ultrasonic Thickness Gauging in the Measurement of Zirconium Alloy Pipe
摘 要
锆合金管坯在检验时,需要对管坯尺寸进行测量。介绍了一种管材超声自动探伤系统中的激光测外径和超声测厚的尺寸测量方法。通过某规格锆合金管坯的应用测试试验,表明该系统外径测量误差不超过±0.008 mm,壁厚测量误差不超过±0.02 mm,内径测量误差不超过±0.025 mm,能够满足锆合金管材生产需要。
Abstract
It is necessary to measure the size of the zirconium alloy pipe when the pipe is tested. In this paper, a measuring method for the diameter of laser and ultrasonic thickness is introduced in the ultrasonic automatic flaw detection system for pipes. Through the application and test of a zirconium alloy pipe, the error of the outer diameter measurement is <±0.008 mm, the wall thickness measurement error is <±0.02 mm, and the inner diameter measurement error is <±0.025 mm, which is able to meet the requirement of pipe production.
中图分类号 TG115.28 DOI 10.11973/wsjc201804010
所属栏目 试验研究
基金项目
收稿日期 2017/12/4
修改稿日期
网络出版日期
作者单位点击查看
备注凌海军(1983-),男,硕士,工程师,主要从事质量管理和无损检测工作
引用该论文: LING Haijun,SUN Shaolin,JIAO Yonggang,SHEN Zaiwei. Application of Laser Diameter Measurement and Ultrasonic Thickness Gauging in the Measurement of Zirconium Alloy Pipe[J]. Nondestructive Testing, 2018, 40(4): 50~52
凌海军,孙少林,焦永刚,沈载伟. 激光测径和超声测厚在锆合金管材测量中的应用[J]. 无损检测, 2018, 40(4): 50~52
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李恒羽,袁改焕,王德华. 尺寸连续测量技术在核用锆管生产中的应用[J].钛工业进展, 2008, 25(2):37-41.
【2】毛捷,郭成彬,张逸君,等.细小管材的自动化高精度超声测量[J].应用声学,2002,21(4):29-32.
【2】毛捷,郭成彬,张逸君,等.细小管材的自动化高精度超声测量[J].应用声学,2002,21(4):29-32.
相关信息