Application of Eddy Current Array Testing Technology for Uniform Surface of Austenite Stainless Steel
摘 要
为了了解奥氏体不锈钢均匀表面的涡流阵列检测技术的检测能力,对比分析了2个奥氏体不锈钢工件均匀表面的检测结果,并与传统的溶剂去除型着色渗透检测技术的检测结果进行了对比。结果表明:对于奥氏体不锈钢均匀表面的检测,涡流阵列检测技术能够在一定程度上对表面开口浅缺陷进行深度评估,其表面开口浅缺陷和埋藏浅的近表面缺陷的检测能力也优于溶剂去除型着色渗透检测技术;对于表面开口应力腐蚀开裂和孔蚀的检测,前者的缺陷分辨力略低于后者,但缺陷显示对比度和缺陷检出率却高于后者。
Abstract
To know the detectability of eddy current array testing technology for the uniform surface of the austenite stainless steel, the testing results of the uniform surfaces of 2 austenite stainless steel work piece were analyzed and compared with the ones of solvent-removal dye penetrate testing. The result shows that, for the testing of the uniform surface of austenite stainless steel, eddy current array technology can be used to estimate the depth of the surface-breaking shallow defect, and has better detectability for the surface-breaking shallow defects and the subsurface defects with a small buried depth than that of solvent-removal dye penetrate testing technology; the former has the lower defect resolution power but higher contrast and defect detectability than the latter for the surface-breaking stress corrosion cracking.
中图分类号 TG115.28 DOI 10.11973/wsjc201812014
所属栏目 试验研究
基金项目 国家质量监督检验检疫总局科技计划项目(2017QK180,2015QK248)
收稿日期 2018/8/15
修改稿日期
网络出版日期
作者单位点击查看
备注李运涛(1978-),男,高级工程师,硕士,主要从事电磁无损检测新技术应用研究开发工作
引用该论文: LI Yuntao,SONG Cheng,HU Bin,WAN Benli,SHI Jin,ZHAO Hong. Application of Eddy Current Array Testing Technology for Uniform Surface of Austenite Stainless Steel[J]. Nondestructive Testing, 2018, 40(12): 68~73
李运涛,宋成,胡斌,万本例,史进,赵泓. 奥氏体不锈钢均匀表面的涡流阵列检测技术应用[J]. 无损检测, 2018, 40(12): 68~73
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈学东, 王冰,关卫和, 等. 我国石化企业在用压力容器与管道使用现状和缺陷状况分析与失效预防对策[J]. 压力容器,2001, 18(5):43-53.
【2】宋光雄, 张晓庆, 常彦衍, 等. 压力设备腐蚀失效案例统计分析[J]. 材料工程, 2004(2):6-9.
【3】胡学知. 渗透检测[M]. 北京:中国劳动社会保障出版社, 2007.
【4】徐可北, 周俊华, 任吉林. 涡流检测[M]. 北京:机械工业出版社, 2004.
【5】LI Yuntao, HU Bin, LIU Wen, et al. Eddy current array and liquid penetrant testing contrast testing on austenite stainless steel piping[C]//19th World Conference on Non-Destructive Testing 2016. Munich:[s.n.], 2016:84-92.
【6】刘昆鹏, 赵子华, 张峥. 321不锈钢疲劳早期损伤的涡流评估[J]. 材料工程, 2012(11):61-65.
【7】李运涛, 胡斌, 代淮北, 等. 奥氏体不锈钢管道SCC检测技术对比[J]. 无损检测, 2016, 38(11):74-78.
【8】沈丁杰, 邹建伟, 胡彬. 锅炉受热面奥氏体不锈钢管弯头表面裂纹涡流检测技术研究[J]. 湖南电力, 2011, 31(3):5-7.
【2】宋光雄, 张晓庆, 常彦衍, 等. 压力设备腐蚀失效案例统计分析[J]. 材料工程, 2004(2):6-9.
【3】胡学知. 渗透检测[M]. 北京:中国劳动社会保障出版社, 2007.
【4】徐可北, 周俊华, 任吉林. 涡流检测[M]. 北京:机械工业出版社, 2004.
【5】LI Yuntao, HU Bin, LIU Wen, et al. Eddy current array and liquid penetrant testing contrast testing on austenite stainless steel piping[C]//19th World Conference on Non-Destructive Testing 2016. Munich:[s.n.], 2016:84-92.
【6】刘昆鹏, 赵子华, 张峥. 321不锈钢疲劳早期损伤的涡流评估[J]. 材料工程, 2012(11):61-65.
【7】李运涛, 胡斌, 代淮北, 等. 奥氏体不锈钢管道SCC检测技术对比[J]. 无损检测, 2016, 38(11):74-78.
【8】沈丁杰, 邹建伟, 胡彬. 锅炉受热面奥氏体不锈钢管弯头表面裂纹涡流检测技术研究[J]. 湖南电力, 2011, 31(3):5-7.
相关信息