搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
EPR核电站主管道的超声相控阵检测
          
Phased Array Ultrasonic Inspection of Main Pipeline of EPR Nuclear Power Plant

摘    要
EPR(European Pressurized Reactor)核电站主管道是连接压水堆核电站主回路系统的重要组成部件,采用锻造奥氏体不锈钢窄间隙焊缝连接而成,奥氏体不锈钢管具有声学各向异性、晶粒粗大以及大壁厚的特点,为了提高主管道环焊缝超声检测的可靠性和检测效率,开展了主管道环焊缝超声相控阵检测技术的研究。使用专业声学仿真软件对相控阵探头产生的声束以及声束在奥氏体钢管内的传播进行了声场的仿真模拟,设置了超声相控阵探头参数和相控阵检测工艺参数,并在带有自然缺陷的模拟体试块上进行了试验。试验结果表明,所开发的相控阵超声检测工艺可有效检出验证试块中的缺陷,且缺陷定量分析结果满足规范要求。
标    签 主管道   奥氏体不锈钢   超声相控阵   声学仿真   main coolant line   austenitic stainless steel   phased array ultrasonic   acoustic simulation  
 
Abstract
The main pipe of EPR (European Pressurized Reactor) nuclear power plant is an important component of connecting the main loop system of PWR nuclear power plant and is connected with forged austenitic stainless steel with narrow gap weld. The austenitic stainless steel pipe has the characteristics of acoustic anisotropy, coarse grain size and large wall thickness. In order to improve the reliability and efficiency of the ultrasonic inspection of MCL, phased array (PA) inspection technology has been investigated in this paper. The sound fields of the designed PA probes are demonstrated by the acoustic simulation software. Then, the phased array inspection technology was performed on the natural defects block. The results of the experiment indicated that the PA ultrasonic inspection technology could detect the defects of austenite welds effectively, and the precision of defects sizing met the requirements of related rules.

中图分类号 TG115.28   DOI 10.11973/wsjc201904010

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目

收稿日期 2018/7/5

修改稿日期

网络出版日期

作者单位点击查看


备注汤建帮(1987-),男,硕士研究生,高级工程师,主要从事超声检查技术和超声仿真技术的研究和应用工作

引用该论文: TANG Jianbang,YU Zhe,WANG Weiqiang,SUN Jiawei,LÜ,Tianming. Phased Array Ultrasonic Inspection of Main Pipeline of EPR Nuclear Power Plant[J]. Nondestructive Testing, 2019, 41(4): 49~53
汤建帮,余哲,王韦强,孙加伟,吕天明. EPR核电站主管道的超声相控阵检测[J]. 无损检测, 2019, 41(4): 49~53


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】NAGESWARAN C, CAPPENTIER C, TSE Y Y. Microstructural quantification, modeling and array ultrasonic to improve the inspection of austenitic welds[J]. Insight, 2009, 51(12):1-7.
 
【2】徐西刚,施克人,陈以方. 相控阵超声无损检测系统的研制[J].无损检测, 2004,26(3):116-119.
 
【3】LIU Zijun, PAN Qiangang. Welding process of nuclear island main equipment and narrow gap welding,technology of pressurized water reactor power plant[J]. Electric Welding Machine, 2010, 40:2-5.
 
相关信息
   标题 相关频次
 反应堆压力容器厚壁焊缝的相控阵超声检测
 9
 欧洲先进压水堆核电站薄壁异种金属焊缝的超声检测
 8
 中国先进压水堆核电站控制棒驱动机构耐压壳下部焊缝的自动超声检测
 6
 反应堆控制棒束检测中的异常信号分析
 5
 表面开口缺陷高度的测量方法对比
 4
 核电厂BOSS头焊缝相控阵超声检测技术
 4
 奥氏体不锈钢点蚀缺陷的相控阵超声检测
 3
 奥氏体不锈钢管道环焊缝的超声相控阵检测
 3
 奥氏体不锈钢厚壁对接焊缝的超声相控阵CIVA仿真与试验
 3
 奥氏体不锈钢小径薄壁管焊缝超声相控阵检测工艺
 3
 基于FFT的核电站反应堆控制棒组件的超声测厚
 3
 基于双面阵探头的厚壁奥氏体不锈钢对接焊缝的相控阵超声检测
 3
 06Cr17Ni5N奥氏体不锈钢热轧板表面脱皮原因
 2
 0Cr18Ni9钢表面等离子铌合金化层的显微组织和摩擦磨损性能
 2
 18-8奥氏体不锈钢焊接接头晶间腐蚀的评定及控制
 2
 1Cr18Ni9Ti不锈钢脉冲超窄间隙焊接头的组织及耐腐蚀性能
 2
 304L/ER316L奥氏体不锈钢焊接板的点蚀行为
 2
 304L不锈钢在高温NaOH溶液中的应力腐蚀开裂行为
 2
 304奥氏体不锈钢焊缝低温热老化后的显微组织与力学性能
 2
 304奥氏体不锈钢护栏断裂失效分析
 2
 304不锈钢密封垫片开裂原因分析
 2
 310S和AL-6XN不锈钢在熔融MgCl2中的腐蚀行为
 2
 316L不锈钢焊缝的点蚀行为
 2
 316L不锈钢在普光净化厂含氯胺液中的应力腐蚀开裂
 2
 EPR核电站反应堆压力容器主螺栓超声检查工艺的仿真技术
 2
 TP304H奥氏体锅炉管高温运行显微特征
 2
 Z6CNT18-10奥氏体不锈钢扩散管在蒸汽疏水环境中的疲劳开裂特征
 2
 奥氏体不锈钢AL-6XN在超临界水中的腐蚀
 2
 奥氏体不锈钢Cr17Mn6Ni4Cu2N铸坯壳层和心部的组织及热塑性
 2
 奥氏体不锈钢对接焊接头对比试块的制作及应用
 2