Effect of Different Locations and Types of H Steel Section Samples on Tensile Test Results
摘 要
分别在不同牌号H型钢的腹板和翼缘取样,按照标准制备成1A及1B试样进行拉伸试验,研究了H型钢不同部位、不同尺寸试样对拉伸试验结果的影响。结果表明:H型钢腹板试样的强度比翼缘试样的高,拉伸试样应尽量在翼缘部位取样。
Abstract
The web and flange of different H steel sections were sampled separately, 1A and 1B samples were made for tensile test according to the standards. The effects of different sizes samples of different parts of H steel section on the tensile test results were studied. The results show that the strength of H steel section web sample was higher than that of flange sample. The tensile sample should be taken at flange as much as possible.
中图分类号 TG142.1 DOI 10.11973/lhjy-wl202002002
所属栏目 试验与研究
基金项目
收稿日期 2019/1/11
修改稿日期
网络出版日期
作者单位点击查看
备注王曼娟(1984-),女,工程师,主要从事金属材料分析工作,13855594397@163.com
引用该论文: WANG Manjuan,CHEN Bin,JIANG Jin. Effect of Different Locations and Types of H Steel Section Samples on Tensile Test Results[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(2): 6~9
王曼娟,陈斌,蒋进. H型钢不同位置及不同类型试样对拉伸试验结果的影响[J]. 理化检验-物理分册, 2020, 56(2): 6~9
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
相关信息