New Metallographic Test Method of Phase Transformation Temperatures of β-titanium Alloy
摘 要
根据钛合金的相变理论,建立了β型钛合金材料相变温度的新测试方法。首先对合金试样进行预热处理,在理论相变温度以上30~50℃保温40 min炉冷至650℃后空冷。然后按照GB/T 23605-2009测试相变温度,晶界板条α体积分数小于1%和等于0%的温度区间即为β型钛合金相变温度区间。TC18,TB6,TB3,TB8钛合金相变温度的测试结果表明该方法切实可行,弥补了标准测试法方法的不足。
Abstract
According to the phase transition theory of titanium alloy, a new test method for phase transformation temperature of β-titanium alloy material was established. Samples were preheated and kept 30-50℃ above the theoretical phase transformation temperature for 40 minutes, cooled in the furnace to 650℃, and cooled in air. Phase transformation temperature was tested according to GB/T 23605-2009, the temperature range of plate-like α volume fraction less than 1% and equal to 0% was phase transformation temperature range of β-titanium alloy. The test results of phase transformation temperature of TC18, TB6, TB3, TB8 titanium alloy showed that the new method was feasible and made up for the deficiency of standard test method.
中图分类号 TG145.4 DOI 10.11973/lhjy-wl202002004
所属栏目 试验技术与方法
基金项目
收稿日期 2019/1/7
修改稿日期
网络出版日期
作者单位点击查看
备注马红征(1969-),女,教授级高级工程师,主要从事稀有金属的显微组织分析工作,baojimhz@163.com
引用该论文: MA Hongzheng,YANG Junhong,HE Wei,DU Xiaoping,SHI Kexue,ZHAI Tongde. New Metallographic Test Method of Phase Transformation Temperatures of β-titanium Alloy[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(2): 15~20
马红征,杨军红,何伟,杜小平,石科学,翟通德. β型钛合金相变温度的新型金相测试方法[J]. 理化检验-物理分册, 2020, 56(2): 15~20
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】胡正寰,夏巨霭.中国材料工程大典材料塑性成形工程(下)[M]. 北京:化学工业出版社,2006.
【2】曹春晓. 钛合金在大型运输机上的应用[J]. 稀有金属快报,2006,25(1):17-21.
【3】盛险峰,丁志文,朱益蟠. 热变形量和热处理工艺对Ti5Al5Mo5V1Cr1Fe钛合金组织和性能的影响[J]. 金属学报,1999,35(增刊1):465.
【4】马红征,翟通德,石科学,等. 金相法测定锆锡和锆铌系锆合金的相变温度[J]. 理化检验(物理分册),2018,54(2):115-118.
【2】曹春晓. 钛合金在大型运输机上的应用[J]. 稀有金属快报,2006,25(1):17-21.
【3】盛险峰,丁志文,朱益蟠. 热变形量和热处理工艺对Ti5Al5Mo5V1Cr1Fe钛合金组织和性能的影响[J]. 金属学报,1999,35(增刊1):465.
【4】马红征,翟通德,石科学,等. 金相法测定锆锡和锆铌系锆合金的相变温度[J]. 理化检验(物理分册),2018,54(2):115-118.
相关信息