Creep Behavior of Silicone Rubber at Different Temperatures and Establishment of Viscoelastic Parameter Model with Variable Temperature
摘 要
在不同温度(-20,-5,10,25,40 ℃)下对硅橡胶进行蠕变试验,采用三参数固体模型和Burgers模型对试验结果进行拟合,得到了不同温度下的黏弹性参数;基于三参数固体模型及无量纲分析方法,建立了硅橡胶变温黏弹性参数预测模型。结果表明:硅橡胶的蠕变行为与温度具有明显相关性,随着温度的升高,其蠕变应变和蠕变速率均逐渐增大;与Burgers模型相比,三参数固体模型能够更准确地描述硅橡胶在不同温度下的静态蠕变行为;基于三参数固体模型及无量纲分析方法建立的黏弹性参数预测模型具有较高的预测精度,预测结果与试验结果吻合较好。
Abstract
Creep tests of silicone rubber at different temperatures (-20,-5,10,25,40 ℃) were carried out. The test results were fitted and analyzed through the three-parameter solid model and the Burgers model, and viscoelastic parameters at different temperatures were obtained. The prediction model of silicone rubber viscoelastic parameters at variable temperatures was established based on the three-parameter solid model and dimensionless analysis method. The results show that the creep behavior of silicone rubber had obvious correlation with the temperature; its creep strain and creep rate increased gradually with temperature. The three-parameter solid model described the static creep characteristics of silicone rubber at different temperatures more accurately than Burgers model did. The viscoelastic parameter prediction model based on three-parameter solid model and dimensionless analysis method had high prediction accuracy, and the prediction results were in good agreement with the test results.
中图分类号 TQ333 DOI 10.11973/jxgccl202004015
所属栏目 物理模拟与数值模拟
基金项目
收稿日期 2019/3/28
修改稿日期 2020/2/21
网络出版日期
作者单位点击查看
备注刘会英(1960-),女,山东威海人,教授,硕士
引用该论文: LIU Huiying,LI Weiwei. Creep Behavior of Silicone Rubber at Different Temperatures and Establishment of Viscoelastic Parameter Model with Variable Temperature[J]. Materials for mechancial engineering, 2020, 44(4): 78~82
刘会英,李微微. 不同温度下硅橡胶蠕变行为及变温黏弹性参数模型的建立[J]. 机械工程材料, 2020, 44(4): 78~82
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王宝珍,胡时胜,周相荣.不同温度下橡胶的动态力学性能及本构模型研究[J].实验力学,2007,22(1):1-6.
【2】KRISHNAN J M, RAJAGOPAL K R. On the mechanical behavior of asphalt[J]. Mechanics of Materials, 2005,37(11):1085-1100.
【3】WILLIAMS M L, LANDEL R F, FERRY J D. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids[J]. Journal of the American Chemical Society, 1955, 77(14):3701-3707.
【4】ZACHARATOS A, KONTOU E. Nonlinear viscoelastic modeling of soft polymers[J]. Journal of Applied Polymer Science, 2015, 132(26):42141.
【5】ARABANI M, KAMBOOZIA N. The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions[J]. Construction and Building Materials, 2013, 41(4):594-601.
【6】林松,高庆,李映辉,等.丁基橡胶粘弹性材料的非线性蠕变行为[J].机械工程材料,2007,31(7):35-37.
【7】张美美. 打印机分纸胶辊的摩擦特性研究[D].哈尔滨:哈尔滨工业大学,2014:16-20.
【8】魏轩,赵华.硬质聚氨酯泡沫材料的常温蠕变特性[J].机械工程材料,2015,39(7):104-107.
【9】黄传辉,王前,张磊,等.一种新型双弹簧、双活塞本构模型在聚合物黏弹性质描述中的应用研究[J].中国科学:技术科学,2017,47(5):495-501.
【2】KRISHNAN J M, RAJAGOPAL K R. On the mechanical behavior of asphalt[J]. Mechanics of Materials, 2005,37(11):1085-1100.
【3】WILLIAMS M L, LANDEL R F, FERRY J D. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids[J]. Journal of the American Chemical Society, 1955, 77(14):3701-3707.
【4】ZACHARATOS A, KONTOU E. Nonlinear viscoelastic modeling of soft polymers[J]. Journal of Applied Polymer Science, 2015, 132(26):42141.
【5】ARABANI M, KAMBOOZIA N. The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions[J]. Construction and Building Materials, 2013, 41(4):594-601.
【6】林松,高庆,李映辉,等.丁基橡胶粘弹性材料的非线性蠕变行为[J].机械工程材料,2007,31(7):35-37.
【7】张美美. 打印机分纸胶辊的摩擦特性研究[D].哈尔滨:哈尔滨工业大学,2014:16-20.
【8】魏轩,赵华.硬质聚氨酯泡沫材料的常温蠕变特性[J].机械工程材料,2015,39(7):104-107.
【9】黄传辉,王前,张磊,等.一种新型双弹簧、双活塞本构模型在聚合物黏弹性质描述中的应用研究[J].中国科学:技术科学,2017,47(5):495-501.
相关信息