Research Progress on Microstructure and Properties ofSelective Laser Melted TC4 Titanium Alloy
摘 要
激光选区熔化技术是在精密复杂零部件制备方面应用较广的激光增材制造技术之一,可实现复杂零件的近净成形。从成形工艺参数和固溶时效处理两方面,对现阶段激光选区熔化成形TC4合金显微组织及力学性能控制的研究进展进行了综述,并对其后续发展方向进行了展望。
Abstract
Selective laser melting technique is a widely used laser additive manufacturing technology in preparation of precise and complex parts, which could realize the near net forming of complex parts. Through the forming process parameters, and solution and aging treatment methods, the research progress of microstructure and mechanical properties control of TC4 alloy formed by selective laser melting in the current stage is reviewed, and the future development direction is prospected.
中图分类号 TG156.9 TB31 DOI 10.11973/jxgccl202008001
所属栏目 综述
基金项目 上海市青年科技启明星计划(18QB1400600);上海第二工业大学研究生项目资金(EGD19YJ0086)
收稿日期 2019/7/1
修改稿日期 2020/6/28
网络出版日期
作者单位点击查看
备注朱冬(1996-),男,江苏淮安人,硕士研究生
引用该论文: ZHU Dong,ZHANG Liang,WU Wenheng,LU Lin,NI Xiaoqing,SONG Jia,ZHU Wenhua,WANG Jiaqi. Research Progress on Microstructure and Properties ofSelective Laser Melted TC4 Titanium Alloy[J]. Materials for mechancial engineering, 2020, 44(8): 1~4
朱冬,张亮,吴文恒,卢林,倪晓晴,宋佳,朱文华,王佳祺. 激光选区熔化成形TC4钛合金显微组织与性能的研究进展[J]. 机械工程材料, 2020, 44(8): 1~4
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】梁春雷,李晓延,巩水利,等.TC4钛合金薄板激光焊接头疲劳性能研究[J].材料工程,2006,34(4):48-51.
【2】衣晓红,樊占国,张景垒,等.TC4钛合金表面阳极氧化制备TiO2多孔膜的实验研究[J].材料工程,2010,38(3):38-41.
【3】王华明,张述泉,王向明.大型钛合金结构件激光直接制造的进展与挑战(邀请论文)[J].中国激光,2009,36(12):3204-3209.
【4】王华明,张述泉,王韬,等.激光增材制造高性能大型钛合金构件凝固晶粒形态及显微组织控制研究进展[J].西华大学学报(自然科学版),2018,37(4):9-14.
【5】肖振楠,刘婷婷,廖文和,等.激光选区熔化成形TC4钛合金热处理后微观组织和力学性能[J].中国激光,2017,44(9):0902001.
【6】THIJS L,VERHAEGHE F,CRAEGHS T,et al.A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J].Acta Materialia, 2010,58(9):3303-3312.
【7】李海亮,贾德昌,杨治华,等.选区激光熔化3D打印钛合金及其复合材料研究进展[J].材料科学与工艺,2019,27(2):1-15.
【8】黄建国.TC4合金选区激光熔化(SLM)成形的微观组织及性能研究[D].南昌:南昌航空大学,2018.
【9】SUN D S,GU D D,LIN K J,et al.Selective laser melting of titanium parts:Influence of laser process parameters on macro- and microstructures and tensile property[J].Powder Technology, 2019,342:371-379.
【10】WANG Z,XIAO Z Y,TSE Y,et al.Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy[J].Optics & Laser Technology, 2019,112:159-167.
【11】李学伟,孙福久,刘锦辉,等.选择性激光快速熔化TC4合金成形工艺及性能[J].黑龙江科技大学学报,2016,26(5):536-540.
【12】张慧.选区激光熔化TC4合金的凝固组织演化规律研究[D].哈尔滨:哈尔滨工业大学,2017.
【13】张亮,吴文恒,卢林,等.激光选区熔化热输入参数对Inconel 718合金温度场的影响[J].材料工程,2018,46(7):29-35.
【14】顾冬冬,沈以赴.基于选区激光熔化的金属零件快速成形现状与技术展望[J].航空制造技术,2012(8):32-37.
【15】朱加雷,王凯,马桂殿,等.TC4钛合金激光选区熔化成形性能研究[J].应用激光,2017,37(6):793-800.
【16】胡婧,陶梅平,唐金颖.3D打印TC4钛合金的成形工艺与热处理行为研究[J].热加工工艺,2017,46(16):220-224.
【17】王琦.TC4钛合金的低温拉伸性能[J].材料工程,2009,37(3):54-55.
【18】王小军.Al-Si合金的选择性激光熔化工艺参数与性能研究[D].北京:中国地质大学(北京),2014.
【19】章媛洁,张金良,张磊,等.3D打印非晶合金材料工艺及性能的研究进展[J].材料工程,2018,46(7):12-18.
【20】XIA M J,GU D D,YU G Q,et al.Influence of hatch spacing on heat and mass transfer,thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy[J].International Journal of Machine Tools and Manufacture, 2016,109:147-157.
【21】QIU C L,PANWISAWAS C,WARD M,et al.On the role of melt flow into the surface structure and porosity development during selective laser melting[J].Acta Materialia, 2015,96:72-79.
【22】PANWISAWAS C,QIU C L,SOVANI Y,et al.On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting[J].Scripta Materialia, 2015,105:14-17.
【23】SUN J F,YANG Y Q,WANG D.Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method[J].Optics & Laser Technology, 2013,49:118-124.
【24】NGUYEN Q B,LUU D N,NAI S M L,et al.The role of powder layer thickness on the quality of SLM printed parts[J].Archives of Civil and Mechanical Engineering, 2018,18(3):948-955.
【25】邓诗诗,杨永强,李阳,等.分区扫描路径规划及其对SLM成型件残余应力分布的影响[J].中国激光,2016,43(12):1202003.
【26】陈德宁,刘婷婷,廖文和,等.扫描策略对金属粉末选区激光熔化温度场的影响[J].中国激光,2016,43(4):0403003.
【27】SONG J,WU W H,ZHANG L,et al.Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting[J].Optik, 2018,170:342-352.
【28】ALI H,GHADBEIGI H,MUMTAZ K.Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V[J]. Materials Science and Engineering: A, 2018, 712: 175-187.
【29】CHICOS L A,ZAHARIA S M,LANCEA C,et al.Concentrated solar energy used for heat treatment of Ti6Al4V alloy manufactured by selective laser melting[J].Solar Energy, 2018,173:76-88.
【30】李文贤,易丹青,刘会群,等.热处理制度对选择性激光熔化成形TC4钛合金的组织与力学性能的影响[J].粉末冶金材料科学与工程,2017,22(1):70-78.
【31】周俊,云忠,汤晓燕,等.热处理对激光选区熔融TC4合金性能的影响[J].金属热处理,2018,43(10):138-142.
【32】王文博,马瑞鑫,井志成,等. 固溶时效处理对激光3D打印TC4合金组织与性能的影响[J].中国激光,2019,46(10):1002003.
【2】衣晓红,樊占国,张景垒,等.TC4钛合金表面阳极氧化制备TiO2多孔膜的实验研究[J].材料工程,2010,38(3):38-41.
【3】王华明,张述泉,王向明.大型钛合金结构件激光直接制造的进展与挑战(邀请论文)[J].中国激光,2009,36(12):3204-3209.
【4】王华明,张述泉,王韬,等.激光增材制造高性能大型钛合金构件凝固晶粒形态及显微组织控制研究进展[J].西华大学学报(自然科学版),2018,37(4):9-14.
【5】肖振楠,刘婷婷,廖文和,等.激光选区熔化成形TC4钛合金热处理后微观组织和力学性能[J].中国激光,2017,44(9):0902001.
【6】THIJS L,VERHAEGHE F,CRAEGHS T,et al.A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J].Acta Materialia, 2010,58(9):3303-3312.
【7】李海亮,贾德昌,杨治华,等.选区激光熔化3D打印钛合金及其复合材料研究进展[J].材料科学与工艺,2019,27(2):1-15.
【8】黄建国.TC4合金选区激光熔化(SLM)成形的微观组织及性能研究[D].南昌:南昌航空大学,2018.
【9】SUN D S,GU D D,LIN K J,et al.Selective laser melting of titanium parts:Influence of laser process parameters on macro- and microstructures and tensile property[J].Powder Technology, 2019,342:371-379.
【10】WANG Z,XIAO Z Y,TSE Y,et al.Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy[J].Optics & Laser Technology, 2019,112:159-167.
【11】李学伟,孙福久,刘锦辉,等.选择性激光快速熔化TC4合金成形工艺及性能[J].黑龙江科技大学学报,2016,26(5):536-540.
【12】张慧.选区激光熔化TC4合金的凝固组织演化规律研究[D].哈尔滨:哈尔滨工业大学,2017.
【13】张亮,吴文恒,卢林,等.激光选区熔化热输入参数对Inconel 718合金温度场的影响[J].材料工程,2018,46(7):29-35.
【14】顾冬冬,沈以赴.基于选区激光熔化的金属零件快速成形现状与技术展望[J].航空制造技术,2012(8):32-37.
【15】朱加雷,王凯,马桂殿,等.TC4钛合金激光选区熔化成形性能研究[J].应用激光,2017,37(6):793-800.
【16】胡婧,陶梅平,唐金颖.3D打印TC4钛合金的成形工艺与热处理行为研究[J].热加工工艺,2017,46(16):220-224.
【17】王琦.TC4钛合金的低温拉伸性能[J].材料工程,2009,37(3):54-55.
【18】王小军.Al-Si合金的选择性激光熔化工艺参数与性能研究[D].北京:中国地质大学(北京),2014.
【19】章媛洁,张金良,张磊,等.3D打印非晶合金材料工艺及性能的研究进展[J].材料工程,2018,46(7):12-18.
【20】XIA M J,GU D D,YU G Q,et al.Influence of hatch spacing on heat and mass transfer,thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy[J].International Journal of Machine Tools and Manufacture, 2016,109:147-157.
【21】QIU C L,PANWISAWAS C,WARD M,et al.On the role of melt flow into the surface structure and porosity development during selective laser melting[J].Acta Materialia, 2015,96:72-79.
【22】PANWISAWAS C,QIU C L,SOVANI Y,et al.On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting[J].Scripta Materialia, 2015,105:14-17.
【23】SUN J F,YANG Y Q,WANG D.Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method[J].Optics & Laser Technology, 2013,49:118-124.
【24】NGUYEN Q B,LUU D N,NAI S M L,et al.The role of powder layer thickness on the quality of SLM printed parts[J].Archives of Civil and Mechanical Engineering, 2018,18(3):948-955.
【25】邓诗诗,杨永强,李阳,等.分区扫描路径规划及其对SLM成型件残余应力分布的影响[J].中国激光,2016,43(12):1202003.
【26】陈德宁,刘婷婷,廖文和,等.扫描策略对金属粉末选区激光熔化温度场的影响[J].中国激光,2016,43(4):0403003.
【27】SONG J,WU W H,ZHANG L,et al.Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting[J].Optik, 2018,170:342-352.
【28】ALI H,GHADBEIGI H,MUMTAZ K.Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V[J]. Materials Science and Engineering: A, 2018, 712: 175-187.
【29】CHICOS L A,ZAHARIA S M,LANCEA C,et al.Concentrated solar energy used for heat treatment of Ti6Al4V alloy manufactured by selective laser melting[J].Solar Energy, 2018,173:76-88.
【30】李文贤,易丹青,刘会群,等.热处理制度对选择性激光熔化成形TC4钛合金的组织与力学性能的影响[J].粉末冶金材料科学与工程,2017,22(1):70-78.
【31】周俊,云忠,汤晓燕,等.热处理对激光选区熔融TC4合金性能的影响[J].金属热处理,2018,43(10):138-142.
【32】王文博,马瑞鑫,井志成,等. 固溶时效处理对激光3D打印TC4合金组织与性能的影响[J].中国激光,2019,46(10):1002003.
相关信息