基于CorrosionMaster的垂尾下支臂腐蚀仿真分析
Corrosion Simulation Analysis of Lower Support Arm of Vertical Fin Based on CorrosionMaster
摘 要
垂尾下支臂是飞机机体的主要承力构件，在外场使用中存在严重的腐蚀问题。采用CorrosionMaster软件，对垂尾下支臂组件进行了腐蚀仿真分析。仿真得到的腐蚀结果与实际运用中出现的腐蚀形态基本吻合。该软件在均匀腐蚀仿真方面是可靠的。
CorrosionMaster软件
仿真分析
lower support arm of vertical fin
CorrosionMaster software
simulation analysis
Abstract
Lower support arm of vertical fin is the main supporting member of basic airframe, serious corrosion problems occurred in outfield application. The corrosion simulation analysis of lower support arm of vertical fin assembly was performed via CorrosionMaster software. The result of corrosion simulation approximately agreed with the actual corrosion shape. The software is reliable in uniform corrosion simulation.
中图分类号 TG174 DOI 10.11973/fsyfh-202101009
所属栏目 数值模拟
基金项目
收稿日期 2018/12/10
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: ZHANG Dandan,WANG Jianhua,XU Huanyu,GUO Dandan,WU Jiahua. Corrosion Simulation Analysis of Lower Support Arm of Vertical Fin Based on CorrosionMaster[J]. Corrosion & Protection, 2021, 42(1): 42
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张蕾,刘慧丛,朱立群,等. 局部修复对典型环境中飞机外部结构件腐蚀的影响及腐蚀当量关系修正坏[J]. 腐蚀与防护,2014,35(8):833-837.
相关信息
