Preparation Techniques and Specific Methods of Metallographic Sample
摘 要
合理的金相试样制备方法是获得清晰、高质量显微组织图像的保障,是材料金相研究的基础。对高纯钨、高氮不锈钢、汽车钢板、涂层材料的金相制备技巧及具体方法进行了分析,解决了制样中切割、镶嵌、磨抛和浸蚀等过程遇到的问题。结果表明:高纯钨硬度高,要保证磨抛时间;高氮不锈钢采用三氯化铁盐酸甘油混合液浸蚀,可获得浸蚀均匀的显微组织形貌;汽车钢板制样时要保证试样直立,不倾斜,且要避免抛光过程产生划痕;涂层材料制样的切割、镶嵌和磨抛过程要做好防护工作,确保涂层完整。
Abstract
Reasonable metallographic sample preparation method is the guarantee to obtain clear and high quality microstructure image, and is the basis of metallographic study of materials. The metallographic preparation techniques and specific methods of high purity tungsten, high nitrogen stainless steel, automobile steel plate and coating material were analyzed, and the problems encountered in the process of cutting, inlaying, grinding and polishing and etching in sample preparation were solved. The results show that the hardness of high purity tungsten is high, so grinding and polishing time should be ensured. High nitrogen stainless steel agent can obtain uniform microstructure by etching with ferric chloride and glycerin hydrochloride mixture. The sample preparation of automobile steel plate should ensure that the sample is upright and not inclined, and avoid scratches during polishing. During the cutting, inlaying and grinding and polishing process of coating material sample preparation, the protective work should be done to ensure the integrity of coating.
中图分类号 TG115.21 DOI 10.11973/lhjy-wl202101002
所属栏目 专题报道(金相检验方法对比分析)
基金项目
收稿日期 2020/5/14
修改稿日期
网络出版日期
作者单位点击查看
备注谷秀锐(1982-),女,工程师,主要从事碳钢、难蚀合金、涂层等金属材料金相显示与分析技术研究工作,178269750@qq.com
引用该论文: GU Xiurui,SUN Jianghuan,LUO Yang,ZHANG Peng,WANG Pei. Preparation Techniques and Specific Methods of Metallographic Sample[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2021, 57(1): 5~7
谷秀锐,孙江欢,罗扬,张鹏,王佩. 金相试样制备技巧及具体方法[J]. 理化检验-物理分册, 2021, 57(1): 5~7
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张洋洋,田晓,田晓璇,等.15CrMo钢和12Cr1MoV钢的快速金相制样方法[J].理化检验(物理分册),2017,53(11):799-801.
【2】贺连芳,李辉平,李敏.金相技能大赛的试样制备[J].中国冶金教育,2018(3):117-119.
【3】葛利玲.材料科学与工程基础实验教程[M].北京:机械工业出版社,2008.
【4】骆祎岚.基于IDEFO方法的金相试样制备系统模型研究[J].实验科学与技术,2011,9(2):40-42.
【5】赵秦生.国外高纯钨粉和钨材制备[J].稀有金属与硬质合金,2003,31(4):56-57.
【6】李宝城,刘英,李继东,等.GD-MS法测定高纯钨锭中多种痕量杂质元素[J].矿冶,2013,22(增刊):149-151.
【7】梁裕,高金良,冯和永,等.新型高氮不锈钢用绞股焊丝[J].新技术新工艺,2020(4):12-16.
【8】张雲飞,赵英利,常金宝,等.节镍型高氮奥氏体不锈钢热变形行为的研究[J].上海金属,2018,40(6):19-23.
【2】贺连芳,李辉平,李敏.金相技能大赛的试样制备[J].中国冶金教育,2018(3):117-119.
【3】葛利玲.材料科学与工程基础实验教程[M].北京:机械工业出版社,2008.
【4】骆祎岚.基于IDEFO方法的金相试样制备系统模型研究[J].实验科学与技术,2011,9(2):40-42.
【5】赵秦生.国外高纯钨粉和钨材制备[J].稀有金属与硬质合金,2003,31(4):56-57.
【6】李宝城,刘英,李继东,等.GD-MS法测定高纯钨锭中多种痕量杂质元素[J].矿冶,2013,22(增刊):149-151.
【7】梁裕,高金良,冯和永,等.新型高氮不锈钢用绞股焊丝[J].新技术新工艺,2020(4):12-16.
【8】张雲飞,赵英利,常金宝,等.节镍型高氮奥氏体不锈钢热变形行为的研究[J].上海金属,2018,40(6):19-23.
相关信息