Defects recognition and quantitative characterization of ultrasonic reflection imaging invariable thickness composite structure
摘 要
针对复合材料零件中常见的变厚度层压板结构,提出了一种超声C扫描反射法自动化检测成像与缺陷识别方案。其基本原理是根据变厚度零件的厚度范围设置包含最大有效分析区间的闸门,分别采集“尾沿位置”、“首沿位置”、“峰值位置”和“尾沿波幅”信号进行成像,形成4幅C扫描图。通过分析缺陷识别的原理,总结归纳出变厚度零件中的分层、脱黏、夹杂、孔隙密集等4种典型缺陷的识别方案,从而解决了零件底波位置变动导致的不易获取缺陷分析区间的问题。对含有典型人工缺陷的试块进行C扫描反射法检测并对检测结果进行定量分析,结果表明:该自动化检测方案能够准确地识别变厚度零件中的缺陷,对缺陷尺寸的评判具有较高的可靠性。
Abstract
This paper introduces an imaging and recognition method of pulse echo ultrasonic C-scan automatics technology to test variable thickness laminates structures which are extensively used in composite parts. The principle lies on the setting up threshold of effective analysis interval based on the thickest area of laminate to collect the “position of last edge”, “position of first edge”, “amplitude of any peak” and “amplitude of last edge” signals, and hence to form four pairs of C-scan images. By analyzing the theory of defect identification, the recognizing method of typical defects, such as delamination, disbonding, inclusion and porosity density is concluded. This technology can solve the problem of hard to acquire effective analysis interval caused by bottom wave shifting in pulse echo method. By using the method of pulse echo ultrasonic C-scan to detect the reference block with typical defects and by quantitatively analyzing detection results, the experimental results show that the defects in variable thickness parts can be well found by this method, and the judgment of defects size is reliable.
中图分类号 TG115.28 DOI 10.11973/wsjc202107006
所属栏目 试验研究
基金项目
收稿日期 2021/1/8
修改稿日期
网络出版日期
作者单位点击查看
备注徐莹(1986-),女,硕士,工程师,主要从事航空复合材料制件的无损检测技术研究工作
引用该论文: XU Ying,ZHANG Dekui,HAO Wei,WANG Jue. Defects recognition and quantitative characterization of ultrasonic reflection imaging invariable thickness composite structure[J]. Nondestructive Testing, 2021, 43(7): 21~26
徐莹,张德魁,郝威,王珏. 变厚度复合材料结构超声反射法成像的缺陷识别与定量表征[J]. 无损检测, 2021, 43(7): 21~26
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】赵稼祥. 民用航空和先进复合材料[J].高科技纤维与应用,2007,32(2):6-10.
【2】贺福, 孙微.碳纤维复合材料在大飞机上的应用[J].高科技纤维与应用,2007,32(6):5-8,17.
【3】黄汉生. 复合材料在飞机主结构中的应用动向[J].化工新型材料,2004,32(10):51-52.
【4】刘松平, 刘菲菲.先进复合材料无损检测技术[M].北京:航空工业出版社,2017.
【5】周正干, 王鑫,章宽爽,等.基于超声C扫描的变厚度构件扫查路径规划和增益补偿检测法[J].无损检测,2015,37(6):15-18.
【6】竺科仪, 徐志农,祝建礼.变厚度曲面复合构件超声检测中的自动波形跟踪技术[J].机床与液压,2007,35(1):177-179.
【7】郑慧峰, 吕江明,杨妮,等.变厚度曲面复合工件超声波形自动跟踪研究[J].计量学报,2012,33(5):400-404.
【8】张婷, 刘奎,周辉,等.变厚度碳纤维/环氧树脂基复合材料层压板的多电子闸门C扫成像[J].无损检测,2013,35(7):16-18.
【2】贺福, 孙微.碳纤维复合材料在大飞机上的应用[J].高科技纤维与应用,2007,32(6):5-8,17.
【3】黄汉生. 复合材料在飞机主结构中的应用动向[J].化工新型材料,2004,32(10):51-52.
【4】刘松平, 刘菲菲.先进复合材料无损检测技术[M].北京:航空工业出版社,2017.
【5】周正干, 王鑫,章宽爽,等.基于超声C扫描的变厚度构件扫查路径规划和增益补偿检测法[J].无损检测,2015,37(6):15-18.
【6】竺科仪, 徐志农,祝建礼.变厚度曲面复合构件超声检测中的自动波形跟踪技术[J].机床与液压,2007,35(1):177-179.
【7】郑慧峰, 吕江明,杨妮,等.变厚度曲面复合工件超声波形自动跟踪研究[J].计量学报,2012,33(5):400-404.
【8】张婷, 刘奎,周辉,等.变厚度碳纤维/环氧树脂基复合材料层压板的多电子闸门C扫成像[J].无损检测,2013,35(7):16-18.
相关信息