Laboratory accreditation of industrial computed tomography testing competence
摘 要
介绍了工业CT(计算机层析成像)检测技术能力的实验室认可现状;基于标准CNAS-CL01:2018 《检测和校准实验室能力认可准则》的要求,从人员、设备、检测过程控制、测量不确定度评定及确保结果有效性等方面分析了影响工业CT检测技术能力的主要因素,最后提出了工业CT技术能力实验室认可的建议。
Abstract
This paper introduces the current situation of laboratory accreditation for technical competence of industrial computed tomography. Based on the requirements of CNAS-CL01:2018 “Accreditation criteria for the competency of tesing and calibration laboratories”, the main factors affecting the technical competence of industrial CT testing from the aspects of personnel, equipment, testing process control, evaluation of measurement uncertainty and ensuring the validity of results are analyzed. Finally, some suggestions on the accreditation for technical competence of industrial CT are given.
中图分类号 TG115.28 DOI 10.11973/wsjc202109013
所属栏目 无损检测机构新技术能力认可专题
基金项目 中国合格评定国家认可委员会科技项目(2019CNAS07)
收稿日期 2021/4/30
修改稿日期
网络出版日期
作者单位点击查看
备注倪培君(1965-),男,研究员,主要研究方向为工业CT、数字射线成像检测和超声检测
引用该论文: NI Peijun,ZHANG Weiguo,GUO Miao,FU Kang,PAN Feng. Laboratory accreditation of industrial computed tomography testing competence[J]. Nondestructive Testing, 2021, 43(9): 58~63
倪培君,张维国,郭淼,付康,潘锋. 工业CT检测的实验室能力认可[J]. 无损检测, 2021, 43(9): 58~63
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】倪培君,李旭东,彭建中.工业CT技术-第六讲:工业CT在无损检测中的应用[J].无损检测,1996,18(6):173-176.
【2】倪培君,李旭东,张维国,等.工业X射线CT的应用[J].CT理论与应用研究,1997,6(3):36-42.
【3】郭智敏,倪培君,乔日东, 等. 工业CT系统空间分辨力测试方法[J]. 无损检测, 2011, 33(11):13-16,20.
【4】郭智敏,倪培君,曹玉玲, 等. 工业CT系统空间分辨率两种测试方法分析与评价[J].CT理论与应用研究, 2015, 24(3):393-399.
【5】付康,倪培君,唐盛明,等. 基于工业CT线性尺寸测量的不确定度分析[J].强激光与粒子束,2018,30(5):162-167.
【2】倪培君,李旭东,张维国,等.工业X射线CT的应用[J].CT理论与应用研究,1997,6(3):36-42.
【3】郭智敏,倪培君,乔日东, 等. 工业CT系统空间分辨力测试方法[J]. 无损检测, 2011, 33(11):13-16,20.
【4】郭智敏,倪培君,曹玉玲, 等. 工业CT系统空间分辨率两种测试方法分析与评价[J].CT理论与应用研究, 2015, 24(3):393-399.
【5】付康,倪培君,唐盛明,等. 基于工业CT线性尺寸测量的不确定度分析[J].强激光与粒子束,2018,30(5):162-167.
相关信息