Dynamic Mechanical Properties and Constitutive Relation of SiCp/Al Composites under High Strain Rate
摘 要
利用分离式Hopkinson压杆试验装置对体积分数15% SiCp/Al复合材料进行动态压缩试验,研究了该复合材料在500~2 000 s-1高应变速率下的动态力学性能及其显微组织演变;基于试验数据,通过包含与应变速率和塑性应变相关的绝热温升软化项的Johnson-Cook本构模型对应力-应变曲线进行预测,并将模型预测结果与试验结果进行对比。结果表明:复合材料的应变速率强化效应不明显,但是该材料具有显著的应变强化效应;随着应变速率的增加,复合材料的变形类型由均匀变形向局部化变形转变,增强相颗粒破裂严重,绝热剪切带在局部区域形成并扩展;采用包含绝热温升软化项Johnson-Cook本构模型计算得到的应力-应变曲线与试验结果间的相对误差小于17%。
Abstract
Dynamic compression tests of the 15% (volume fraction) SiCp/Al composite were carried out by separate Hopkinson compression bar device, and the dynamic mechanical properties and microstructure evolution of the composite at high strain rates of 500-2 000 s-1 were studied. With the experimental data, stress-train curves were predicted by the Johnson-Cook constitutive model containing the adiabatic temperature rise softening term relating to strain rate and plastic strain, and the predicted results of the model were compared with the experimental results. The results show that the strain rate strengthening effect of the composites was not obvious, but the composites showed a significant strain strengthening. With increasing strain rate, the deformation types of the composite changed from uniform deformation to localized deformation, the fracture of the reinforcing particles was serious, and the adiabatic shear bands were formed and extended in local areas. The relative error between the stress-strain curves calculated by the modified Johnson-Cook constitutive model containing the adiabatic temperature rise softening term and the experimental results was less than 17%.
中图分类号 TB33 DOI 10.11973/jxgccl202109016
所属栏目 物理模拟与数值模拟
基金项目
收稿日期 2020/7/15
修改稿日期 2021/6/3
网络出版日期
作者单位点击查看
备注邬小萍(1985-),女,内蒙古鄂尔多斯人,高级工程师,硕士
引用该论文: WU Xiaoping,Lü Qinli,YANG Kuan,YANG Zhongyuan,JI Hong. Dynamic Mechanical Properties and Constitutive Relation of SiCp/Al Composites under High Strain Rate[J]. Materials for mechancial engineering, 2021, 45(9): 83~87
邬小萍,吕琴丽,杨宽,杨中元,纪红. 高应变速率下SiCp/Al复合材料的动态力学性能及其本构关系[J]. 机械工程材料, 2021, 45(9): 83~87
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】方玲, 张小联.SiCp/Al复合材料力学性能的研究进展[J].材料研究与应用, 2010, 4(1):9-12. FANG L, ZHANG X L. Progress on developments of mechanical properties of SiCp/Al composites[J]. Materials Research and Application, 2010, 4(1):9-12.
【2】崔岩.碳化硅颗粒增强铝基复合材料的航空航天应用[J].材料工程, 2002, 30(6):3-6. CUI Y. Areo space applications of silicon carbide particulate reinforced aluminium matrix composites[J]. Journal of Materials Engineering, 2002, 30(6):3-6.
【3】向华, 曲选辉, 肖平安, 等.SiCp/Al电子封装复合材料的现状和发展[J].材料导报, 2003, 17(2):54-57. XIANG H, QU X H, XIAO P A, et al. Current status and development prospect for SiCp/Al metal-matrix composites for electronic packaging[J].Materials Review, 2003, 17(2):54-57.
【4】李风.高速率成形中材料本构关系的研究进展[J].材料研究与应用, 2008, 2(3):165-168. LI F. Research progress of material constitutive behavior in high velocity forming[J]. Materials Research and Application, 2008, 2(3):165-168.
【5】刘文建.霍普金森杆在复合材料动态测试中的应用[J].纤维复合材料, 2005, 22(2):44-46. LIU W J.Application of Hopkinson bar in the dynamic test of composite[J].Fiber Composites, 2005, 22(2):44-46.
【6】OOSTERKAMP L D, IVANKOVIC A, VENIZELOS G. High strain rate properties of selected aluminum alloys[J]. Materials Science and Engineering:A, 2000, 278:225-235.
【7】SALSA P A, BENSON D J, VENKATARAMAN S, et al. Numerical implementation of polymer viscoplastic equations for high strain-rate composite models[J]. Journal of Aerospace Engineering, 2009, 22(3):304-309.
【8】WANG W B, SHENOP R A. Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model[J]. Journal of Ship Mechanics, 2009, 13(3):406-415.
【9】胡锐, 袁秦鲁, 李金山, 等.SiCp/Al复合材料高应变率压缩变形及损伤机理[J].稀有金属材料与工程, 2005, 34(4):653-656. HU R, YUAN Q L, LI J S, et al. Compression deformation and damage mechanism of SiCp/Al composites with high strain rate[J].Rare Metal Materials and Engineering, 2005, 34(4):653-656.
【10】孔令超, 宋卫东, 宁建国, 等.TiC颗粒增强钛基复合材料的静动态力学性能[J].中国有色金属学报, 2008, 18(10):1756-1762. KONG L C, SONG W D, NING J G, et al. Static and dynamic behaviors of TiC particle reinforced titanium matrix composites[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(10):1756-1762.
【11】JOHNSON G R, COOK W H.A constitutive model and data for metal subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the Seventh Symposium on Ballistics.Hague, Netherlands:[s.n.], 1983:741-547.
【12】JOHNSON G R, COOK W H. Fracture characteristics of threemetals subjected to various strains, strains rates, temperature andpressure[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48.
【13】ZERILLI F J, ARMSTRONG R W.Dislocation-mechanics-based constitutive relations for material dynamics calculations[J].Journal of Applied Physics, 1987, 61(5):1816-1825.
【14】BANNANN D J.Modeling temperature and strain rate dependent large deformation of metals[J].Applied Mechanics Review, 1990, 43(5):312-319.
【15】BODNER S R, PARTOM Y.Constitutive equations for elastic-viscoplastic strain-hardening materials[J].Journal of Applied Mechanics, Transactions ASME, 1975, 42(2):385-389.
【2】崔岩.碳化硅颗粒增强铝基复合材料的航空航天应用[J].材料工程, 2002, 30(6):3-6. CUI Y. Areo space applications of silicon carbide particulate reinforced aluminium matrix composites[J]. Journal of Materials Engineering, 2002, 30(6):3-6.
【3】向华, 曲选辉, 肖平安, 等.SiCp/Al电子封装复合材料的现状和发展[J].材料导报, 2003, 17(2):54-57. XIANG H, QU X H, XIAO P A, et al. Current status and development prospect for SiCp/Al metal-matrix composites for electronic packaging[J].Materials Review, 2003, 17(2):54-57.
【4】李风.高速率成形中材料本构关系的研究进展[J].材料研究与应用, 2008, 2(3):165-168. LI F. Research progress of material constitutive behavior in high velocity forming[J]. Materials Research and Application, 2008, 2(3):165-168.
【5】刘文建.霍普金森杆在复合材料动态测试中的应用[J].纤维复合材料, 2005, 22(2):44-46. LIU W J.Application of Hopkinson bar in the dynamic test of composite[J].Fiber Composites, 2005, 22(2):44-46.
【6】OOSTERKAMP L D, IVANKOVIC A, VENIZELOS G. High strain rate properties of selected aluminum alloys[J]. Materials Science and Engineering:A, 2000, 278:225-235.
【7】SALSA P A, BENSON D J, VENKATARAMAN S, et al. Numerical implementation of polymer viscoplastic equations for high strain-rate composite models[J]. Journal of Aerospace Engineering, 2009, 22(3):304-309.
【8】WANG W B, SHENOP R A. Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model[J]. Journal of Ship Mechanics, 2009, 13(3):406-415.
【9】胡锐, 袁秦鲁, 李金山, 等.SiCp/Al复合材料高应变率压缩变形及损伤机理[J].稀有金属材料与工程, 2005, 34(4):653-656. HU R, YUAN Q L, LI J S, et al. Compression deformation and damage mechanism of SiCp/Al composites with high strain rate[J].Rare Metal Materials and Engineering, 2005, 34(4):653-656.
【10】孔令超, 宋卫东, 宁建国, 等.TiC颗粒增强钛基复合材料的静动态力学性能[J].中国有色金属学报, 2008, 18(10):1756-1762. KONG L C, SONG W D, NING J G, et al. Static and dynamic behaviors of TiC particle reinforced titanium matrix composites[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(10):1756-1762.
【11】JOHNSON G R, COOK W H.A constitutive model and data for metal subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the Seventh Symposium on Ballistics.Hague, Netherlands:[s.n.], 1983:741-547.
【12】JOHNSON G R, COOK W H. Fracture characteristics of threemetals subjected to various strains, strains rates, temperature andpressure[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48.
【13】ZERILLI F J, ARMSTRONG R W.Dislocation-mechanics-based constitutive relations for material dynamics calculations[J].Journal of Applied Physics, 1987, 61(5):1816-1825.
【14】BANNANN D J.Modeling temperature and strain rate dependent large deformation of metals[J].Applied Mechanics Review, 1990, 43(5):312-319.
【15】BODNER S R, PARTOM Y.Constitutive equations for elastic-viscoplastic strain-hardening materials[J].Journal of Applied Mechanics, Transactions ASME, 1975, 42(2):385-389.
相关信息