Influencing Factors and Application of Creep Coefficient of the Thermal Barrier Profiles with Insertion Methodology
摘 要
蠕变系数A作为评价隔热型材复合稳定性的指标具有重要意义,通过纵向剪切试验研究了穿条式隔热型材蠕变系数的影响因素及应用。结果表明:蠕变系数A与纵向剪切特征值TC和纵向剪切标准差ST高度相关,而与隔热条截面高度h无关。蠕变系数A不应单独使用,需要联合TC和ST才能更有效地对隔热型材的复合稳定性作出评价。现行国家标准中蠕变系数A的合格值空缺,需要大量试验数据来支持后续的修订工作。
Abstract
Creep coefficient A is of great significance as an index to evaluate the composite stability of the thermal barrier profiles. The influencing factors and application of creep coefficient of the thermal barrier profile with insertion methodology were studied by longitudinal shear test. The results show that the creep coefficient A was highly correlated with the result of the longitudinal shear characteristic value TC and the longitudinal shear standard deviation ST. And it has nothing to do with section height h for the thermal barrier strip. It is pointed out that creep coefficient A should not be used alone. It is necessary to combine TC and ST to evaluated the composite stability of the thermal barrier profiles more effectively. There is a vacancy in the qualified value of creep coefficient A in the current national standard. A large amount of test data are needed to support the subsequent revision work.
中图分类号 TU55 DOI 10.11973/lhjy-wl202110005
所属栏目 试验与研究
基金项目 广东省科学院青年科技工作者引导专项基金(2019 GDASYL-0105065)
收稿日期 2020/8/3
修改稿日期
网络出版日期
作者单位点击查看
备注黄显芝(1984-),男,工程师,主要从事有色金属产品的检验工作,huang_x_z@163.com
引用该论文: HUANG Xianzhi,GUAN Yaowei,LIU Yingkun. Influencing Factors and Application of Creep Coefficient of the Thermal Barrier Profiles with Insertion Methodology[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2021, 57(10): 23~26
黄显芝,关耀威,刘英坤. 穿条式隔热型材蠕变系数的影响因素及应用[J]. 理化检验-物理分册, 2021, 57(10): 23~26
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】全国有色金属标准化技术委员会. 铝合金建筑型材第6部分:隔热型材:GB/T 5237. 6-2017[S].北京:中国标准出版社, 2017.
【2】全国有色金属标准化技术委员会.铝合金建筑型材用隔热材料第1部分:聚酰胺型材:GB/T 23615. 1-2017[S].北京:中国标准出版社, 2017.
【3】全国有色金属标准化技术委员会.铝合金建筑型材用隔热材料第2部分:聚氨酯隔热胶:GB/T 23615. 2-2017[S].北京:中国标准出版社, 2017.
【4】全国有色金属标准化技术委员会.铝合金隔热型材复合性能试验方法:GB/T 28289-2012[S].北京:中国标准出版社, 2013.
【5】黄显芝, 詹浩, 李扬.穿条式铝合金隔热型材纵向剪切性能分析[J].中国金属通报, 2017(增刊):183-201.
【6】黄日勇.穿条式隔热型材质量控制要素[J].中国金属通报, 2017(增刊):374-376.
【2】全国有色金属标准化技术委员会.铝合金建筑型材用隔热材料第1部分:聚酰胺型材:GB/T 23615. 1-2017[S].北京:中国标准出版社, 2017.
【3】全国有色金属标准化技术委员会.铝合金建筑型材用隔热材料第2部分:聚氨酯隔热胶:GB/T 23615. 2-2017[S].北京:中国标准出版社, 2017.
【4】全国有色金属标准化技术委员会.铝合金隔热型材复合性能试验方法:GB/T 28289-2012[S].北京:中国标准出版社, 2013.
【5】黄显芝, 詹浩, 李扬.穿条式铝合金隔热型材纵向剪切性能分析[J].中国金属通报, 2017(增刊):183-201.
【6】黄日勇.穿条式隔热型材质量控制要素[J].中国金属通报, 2017(增刊):374-376.
相关信息