Application of automatic impact testing machine in steel for LNG storage tank
摘 要
对比分析了目前市面上常见的推杆式全自动冲击试验机与智能机器人全自动冲击试验机系统,总结了两种系统的优缺点。分别采用手动式冲击试验机与推杆式全自动冲击试验机对液化天然气储罐用高锰钢进行了一系列低温冲击试验,结果表明:两种试验机获得的冲击吸收功无明显差异,但手动式冲击试验机测试结果的离散性较大。
Abstract
The common push rod automatic impact testing machine and intelligent robot automatic impact testing machine systems on the market were compared and analyzed, and the advantages and disadvantages of the two systems were summarized. A series of low temperature impact tests of high manganese steel for LNG storage tank were carried out by using the manual impact test machine and the push rod automatic impact test machine, respectively. The results show that there was no significant difference in the impact absorption energy obtained by the two testing machines, but the test results of the manual impact testing machine were discrete.
中图分类号 TG115 DOI 10.11973/lhjy-wl202204001
所属栏目 专题报道(理化检验实验室建设)
基金项目
收稿日期 2021/9/22
修改稿日期
网络出版日期
作者单位点击查看
备注徐魁龙(1988-),男,硕士,工程师,主要从事金属材料力学性能测试工作,xukuilong@sina.com
引用该论文: XU Kuilong,ZHANG Congyi,ZHANG Xianfeng,WANG Lei. Application of automatic impact testing machine in steel for LNG storage tank[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2022, 58(4): 1~3
徐魁龙,张聪毅,张先锋,王磊. 全自动冲击试验机在液化天然气储罐用钢上的应用[J]. 理化检验-物理分册, 2022, 58(4): 1~3
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】桂立丰. 机械工程材料测试手册-力学卷[M]. 沈阳:辽宁科学技术出版社,2001.
【2】许鹤君. 金属材料韧脆转变温度检测中的一些关键问题[J]. 理化检验(物理分册),2017,53(6):422-427,433.
【3】张华伟,秦小梅,于宝峰,等. 智能机器人全自动冲击试验系统在夏比摆锤冲击试验中的应用[J]. 理化检验(物理分册),2019,55(11):775-778,794.
【4】张松,陈长奎,李剑峰. 全自动试验技术助力复工复产彰显无人值守优势[J]. 理化检验(物理分册),2020,56(6):1-5.
【5】薛侃时,孙大涌,王滨,等. 提高高锰奥氏体超低温钢低温韧性的方法[J]. 机械工程学报,1998,34(6):11-15,22.
【6】陈亚魁,王红鸿,孟亮,等. 超低温高锰钢埋弧焊焊缝金属微观组织及冲击韧性分析[J]. 武汉科技大学学报,2020,43(5):321-325.
【2】许鹤君. 金属材料韧脆转变温度检测中的一些关键问题[J]. 理化检验(物理分册),2017,53(6):422-427,433.
【3】张华伟,秦小梅,于宝峰,等. 智能机器人全自动冲击试验系统在夏比摆锤冲击试验中的应用[J]. 理化检验(物理分册),2019,55(11):775-778,794.
【4】张松,陈长奎,李剑峰. 全自动试验技术助力复工复产彰显无人值守优势[J]. 理化检验(物理分册),2020,56(6):1-5.
【5】薛侃时,孙大涌,王滨,等. 提高高锰奥氏体超低温钢低温韧性的方法[J]. 机械工程学报,1998,34(6):11-15,22.
【6】陈亚魁,王红鸿,孟亮,等. 超低温高锰钢埋弧焊焊缝金属微观组织及冲击韧性分析[J]. 武汉科技大学学报,2020,43(5):321-325.
相关信息