Fracture causes of bolt of elevator traction machine
摘 要
某电梯曳引机用螺栓在使用过程中发生了断裂。采用化学成分分析、金相检验、硬度测试及断口分析等方法,对螺栓断裂的原因进行了分析。结果表明:由于原材料、设计、热处理等方面的原因使螺栓各项性能下降,齿根部位形成应力集中,在长期交变应力的作用下发生了疲劳断裂。最后提出了控制螺栓原材料的质量,严格进行调质热处理的改进措施。
Abstract
The bolt of an elevator traction machine broke in the process of use. The causes of bolt fracture were analyzed by means of chemical composition analysis, metallographic examination, hardness test and fracture analysis. The results show that due to raw materials, design, heat treatment and other reasons, the properties of bolt were reduced, stress concentration occured at the tooth root, and fatigue fracture occurred under the action of long-term alternating stress. The improvement measures of controlling the quality of bolt raw materials and strictly carrying out quenching and tempering heat treatment were put forward.
中图分类号 TG115.2 DOI 10.11973/lhjy-wl202207018
所属栏目 质量控制与失效分析
基金项目 广东省特种设备安全科协同创新中心(2021B1111600002)
收稿日期 2021/11/2
修改稿日期
网络出版日期
作者单位点击查看
备注罗海军(1978-),男,高级工程师,主要从事电梯整机和电梯部件的型式试验、委托检验、安全评估、标准制修订以及测试仪器开发工作,419262405@qq.com
引用该论文: LUO Haijun,ZHANG Jie,ZHANG Sheng. Fracture causes of bolt of elevator traction machine[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2022, 58(7): 68~71
罗海军,张捷,张胜. 电梯曳引机用螺栓断裂原因[J]. 理化检验-物理分册, 2022, 58(7): 68~71
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】袁代霞.电梯事故原因分析与预防措施研究[J].广东科技,2012,21(19):164-165.
【2】曹国洲,李国伟,肖道清.锌合金铸件断裂失效分析[J].热加工工艺,2012,41(23):206-207.
【3】鲍献华,丁二喜,张居光,等.电梯曳引机连接套筒与蜗轮失效分析[J].中国特种设备安全,2012,28(1):64-66.
【4】罗海军,闫宾.电梯蜗轮蜗杆曳引机连接套筒失效分析[J].中国电梯,2017(28):64-67.
【5】孙明正.地铁转向架连接螺栓断裂原因[J].理化检验(物理分册),2021,57(8):58-60.
【6】罗海军,闫宾,朱权利,等.挤压铸造锌合金及固溶时效的组织和性能[J].铸造,2017,66(6):577-581.
【2】曹国洲,李国伟,肖道清.锌合金铸件断裂失效分析[J].热加工工艺,2012,41(23):206-207.
【3】鲍献华,丁二喜,张居光,等.电梯曳引机连接套筒与蜗轮失效分析[J].中国特种设备安全,2012,28(1):64-66.
【4】罗海军,闫宾.电梯蜗轮蜗杆曳引机连接套筒失效分析[J].中国电梯,2017(28):64-67.
【5】孙明正.地铁转向架连接螺栓断裂原因[J].理化检验(物理分册),2021,57(8):58-60.
【6】罗海军,闫宾,朱权利,等.挤压铸造锌合金及固溶时效的组织和性能[J].铸造,2017,66(6):577-581.
相关信息