Discussion on Material Selection of Hydrogen Subsea Pipeline
摘 要
针对国内首条输氢海底管道进行选材探讨,基于对常见的氢致失效形式及机理的分析,参考国内外输氢管道相关的标准规范,并考虑海底管道安装的特殊性,推荐输氢海底管道选用API SPEC 5L X42和X52无缝钢管(PSL2等级优先),采用淬火+回火的热处理工艺。同时,对一些氢脆影响因素进行控制,如合金元素含量、碳当量、管材硬度和非金属夹杂物含量等。可以采用慢应变速率试验、断裂韧性试验、裂纹扩展速率试验、疲劳寿命试验和圆盘压力试验等,对管道材料进行力学性能评价,判断材料在氢环境中的氢脆敏感性,为实际工程应用提供支持。
Abstract
Aiming at the domestic first hydrogen subsea pipeline, based on the analysis of common hydrogen-induced failure forms and mechanisms, refering to domestic and international relevant standards and codes, and considering the particularity of subsea pipeline installation, the material of hydrogen subsea pipeline is recommended to select using API 5L SPEC X42 and X52 seamless pipes (PSL2 level priority). The heat treatment process of quenching and tempering should be adopted. At the same time, some factors which have influence on hydrogen embrittlement should be controlled, such as the content of alloy elements, carbon equivalent, pipe hardness, non-metallic inclusions and so on. The mechanical properties of pipeline materials can be evaluated by slow strain rate test, fracture toughness test, crack growth rate test, fatigue life test and disk pressure test in the hydrogen environment, so as to judge the hydrogen embrittlement susceptibility of material in hydrogen environment and provide support for practical engineering applications.
中图分类号 TE973 DOI 10.11973/fsyfh-202209018
所属栏目 应用技术
基金项目
收稿日期 2020/12/30
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: LI Yan,ZHANG Guoqing,YANG Lijun,YU Xuan,QIAN Sicheng. Discussion on Material Selection of Hydrogen Subsea Pipeline[J]. Corrosion & Protection, 2022, 43(9): 99
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘自亮,熊思江,郑津洋,等.氢气管道与天然气管道的对比分析[J].压力容器,2020,37(2):56-63.
相关信息