Measurement uncertainty of missing dimensions in the detection process of industrial CT systems
摘 要
针对工业CT系统在缺欠尺寸测量过程中的不确定度问题,对可能引起不确定度的误差源进行了分析,并基于GUM法对测量不确定度进行了研究。试验结果表明,所提出的分析方法可以满足工业CT系统对缺欠尺寸测量不确定度的评定要求,其中,测量过程中的误差、CT系统的空间分辨率、密度分辨率、平板探测器像素尺寸、系统误差等是对合成不确定度影响最大的因素。
Abstract
Aiming at the uncertainty in the process of missing dimensional measurement in industrial CT systems, the error sources that may cause uncertainty are analyzed, and the measurement uncertainty is studied based on the GUUM method. The test results show that the proposed analysis method can meet the evaluation requirements of the uncertainties of missing dimensional measurement in industrial CT systems. Among them, the errors in the measurement process, the spatial resolution, the density resolution of the CT system, the pixel size of the plate detector, and the system error are the most important reasons for the synthesis uncertainty.
中图分类号 TG115.28 DOI 10.11973/wsjc202302009
所属栏目 试验研究
基金项目 上海市2020年度“科技创新行动计划”技术标准项目(20DZ2203800)
收稿日期 2022/10/14
修改稿日期
网络出版日期
作者单位点击查看
备注宋飞(1988-),女,硕士,工程师,主要从事能力验证及标准化的相关工作
引用该论文: SONG Fei,ZHANG Yifeng. Measurement uncertainty of missing dimensions in the detection process of industrial CT systems[J]. Nondestructive Testing, 2023, 45(2): 44~47
宋飞,张义凤. 工业CT系统检测过程中缺欠尺寸的[J]. 无损检测, 2023, 45(2): 44~47
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张朝宗, 郭志平, 张朋.工业CT技术和原理[M].北京:科学出版社, 2009.
【2】孙灵霞, 叶云长.工业CT技术特点及应用实例[J].核电子学与探测技术, 2006, 26(4):486-488, 453.
【3】王贤刚, 田杰谟, 张朝宗, 等.用于检测氧化锆人工髋关节的高能X-CT系统[J].稀有金属材料与工程, 2005(S2):1195-1197.
【4】倪培君, 张维国, 郭淼, 等.工业CT检测的实验室能力认可[J].无损检测, 2021, 43(9):58-63.
【5】李敬, 李寿涛, 程云, 等.工业计算机断层成像几何尺寸测量不确定度评定[J].无损检测, 2021, 43(1):24-28.
【6】张朝宗.工业CT技术参数对性能指标的影响(续)——兼谈如何选择工业CT产品[J].无损检测, 2007, 29(3):142-145, 172.
【7】邓甜, 邓倩妮.锥束CT的FDK算法与CUDA实现[J].微型电脑应用, 2011, 27(6):46-50, 3.
【8】齐子诚, 倪培君, 唐盛明, 等.基于工业CT的角度测量方法及不确定度分析[J].计算机测量与控制, 2017, 25(9):43-46.
【9】齐子诚, 倪培君, 唐盛明, 等.基于工业CT直径测量的不确定度评估技术研究[J].兵器材料科学与工程, 2017, 40(6):96-99.
【10】苏宇航, 王倩妮, 何方成.已校准量块的工业CT测量不确定度分析[J].无损检测, 2016, 38(2):28-31.
【2】孙灵霞, 叶云长.工业CT技术特点及应用实例[J].核电子学与探测技术, 2006, 26(4):486-488, 453.
【3】王贤刚, 田杰谟, 张朝宗, 等.用于检测氧化锆人工髋关节的高能X-CT系统[J].稀有金属材料与工程, 2005(S2):1195-1197.
【4】倪培君, 张维国, 郭淼, 等.工业CT检测的实验室能力认可[J].无损检测, 2021, 43(9):58-63.
【5】李敬, 李寿涛, 程云, 等.工业计算机断层成像几何尺寸测量不确定度评定[J].无损检测, 2021, 43(1):24-28.
【6】张朝宗.工业CT技术参数对性能指标的影响(续)——兼谈如何选择工业CT产品[J].无损检测, 2007, 29(3):142-145, 172.
【7】邓甜, 邓倩妮.锥束CT的FDK算法与CUDA实现[J].微型电脑应用, 2011, 27(6):46-50, 3.
【8】齐子诚, 倪培君, 唐盛明, 等.基于工业CT的角度测量方法及不确定度分析[J].计算机测量与控制, 2017, 25(9):43-46.
【9】齐子诚, 倪培君, 唐盛明, 等.基于工业CT直径测量的不确定度评估技术研究[J].兵器材料科学与工程, 2017, 40(6):96-99.
【10】苏宇航, 王倩妮, 何方成.已校准量块的工业CT测量不确定度分析[J].无损检测, 2016, 38(2):28-31.
相关信息