Compilation process and technical interpretation of GB/T 24183—2021 standard
摘 要
对GB/T 24183—2021标准的编制背景、意义及过程进行介绍,并对有关章节的内容进行详细说明。GB/T 24183—2021标准为第一次修订,为了充分了解国际标准,以薄钢板和铝合金板为试样进行标准的符合性试验。该标准为指导和规范金属薄板、薄带的生产和验收提供了有力的技术支撑,同时还可提升金属材料薄板和薄带的研发能力与工艺性能。
Abstract
The compiling background, significance and process of GB/T 24183-2021 standard were introduced, and the contents of relevant chapters were described in detail. The GB/T 24183-2021 standard was the first revision. In order to fully understand the international standard, the standard compliance test was carried out with thin steel plate and aluminum alloy plate as samples. This standard provided strong technical support for guiding and standardizing the production and acceptance of metal sheets and strips, and could also improve the research and development capabilities and process performance of metal sheets and strips.
中图分类号 TB31 DOI 10.11973/lhjy-wl202302001
所属栏目 标准化
基金项目 国家标准计划项目(20193075-T-605);上海海关标准项目(标外20-11)
收稿日期 2022/11/23
修改稿日期
网络出版日期
作者单位点击查看
备注吴益文(1967-),男,研究员,主要从事材料检测技术与标准化科研工作,wumetal@sina.cn
引用该论文: WU Yiwen,YIN Li,HU Yincheng,LI Sijin,LI Jianfeng. Compilation process and technical interpretation of GB/T 24183—2021 standard[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2023, 59(2): 1~3
吴益文,尹力,胡寅诚,李思瑾,李剑锋. GB/T 24183—2021标准的编制过程及技术解读[J]. 理化检验-物理分册, 2023, 59(2): 1~3
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】温晓静.1100工业纯铝板材力学性能各向异性与制耳率的关系研究[D].镇江:江苏大学,2008.
【2】肖华,石磊,仝广,等.冲压成形凸耳不均匀的产生及影响因素[J].锻压技术,2009,34(3):53-56.
【3】黄瑶,温晓静,刘囝,等.纯铝轧制板材拉伸性能与深冲制耳的关系[J].机械工程材料,2008,32(12):66-68.
【4】胡成武,王镇柱,李文元,等.冷轧深冲板制耳率的试验[J].塑性工程学报,2015,22(1):76-81.
【5】黄光杰,汪凌云.3104铝合金板材织构和制耳行为研究[J].重庆大学学报(自然科学版),2000,23(3):20-22,39.
【6】潘秋红,张毅峰,王雷刚,等.冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响[J].机械工程材料,2009,33(9):47-50.
【2】肖华,石磊,仝广,等.冲压成形凸耳不均匀的产生及影响因素[J].锻压技术,2009,34(3):53-56.
【3】黄瑶,温晓静,刘囝,等.纯铝轧制板材拉伸性能与深冲制耳的关系[J].机械工程材料,2008,32(12):66-68.
【4】胡成武,王镇柱,李文元,等.冷轧深冲板制耳率的试验[J].塑性工程学报,2015,22(1):76-81.
【5】黄光杰,汪凌云.3104铝合金板材织构和制耳行为研究[J].重庆大学学报(自然科学版),2000,23(3):20-22,39.
【6】潘秋红,张毅峰,王雷刚,等.冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响[J].机械工程材料,2009,33(9):47-50.
相关信息