Applicability Evaluation of Typical Metal and Nonmetal Materials under Simulated Working Conditions of Water Source Well in Bohai Sea
摘 要
在模拟渤海某油田水源井典型工况条件下对N80钢、1Cr钢、3Cr钢、高密度聚乙烯(HDPE)和超高分子量聚乙烯(UHMWPE)开展了腐蚀试验,评价了各类金属/非金属材料在目标工况条件下的适用性。结果表明:在模拟含氧水源井工况条件下,N80钢和1Cr钢的腐蚀速率均较高,3Cr钢的腐蚀速率相对较低,但存在一定的点蚀倾向;随着浸泡腐蚀时间的延长,HDPE和UHMWPE的密度、硬度以及拉伸性能均存在一定程度的下降,相比之下,塑性和强度较为均衡的UHMWPE更适用于含氧的水源井工况。
Abstract
Corrosion tests were carried out on N80 steel, 1Cr steel, 3Cr steel, high-density polyethylene (HDPE) and ultra-high molecular weight polyethylene (UHMWPE) under simulated typical working conditions of water source wells in an oilfield in Bohai Sea. The applicability of various metal and non metal materials under the working conditions was evaluated. The results showed that the corrosion rates of N80 steel and 1Cr steel were higher than that of 3Cr steel, but 3Cr steel had a certain tendency of pitting corrosion. The densities, hardnesses and tensile properties of HDPE and UHMWPE decreased to a certain extent with the prolongation of immersion corrosion time. UHMWPE with balanced plasticity and strength was relatively suitable for the conditions of water source well containing oxygen.
中图分类号 TG174 DOI 10.11973/fsyfh-202302006
所属栏目 试验研究
基金项目 中海油总院研究课题(2020ZYZL-ZC01)
收稿日期 2021/4/12
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: XING Xijin,ZHANG Yunan,FENG Huanzhi,MA Binxia,HE Song,ZHU Jinyang,ZHANG Lei. Applicability Evaluation of Typical Metal and Nonmetal Materials under Simulated Working Conditions of Water Source Well in Bohai Sea[J]. Corrosion & Protection, 2023, 44(2): 33
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李洪建, 王闰, 杜清珍, 等. NR油田油井井筒腐蚀影响因素实验研究[J]. 西南石油大学学报(自然科学版), 2016, 38(1):146-151.
【2】RUSTANDI A, ADYUTATAMA M, FADLY E, et al. Corrosion rate of carbon steel for flowline and pipeline as transmission pipe in natural gas production with CO2 content[J]. Makara Journal of Technology, 2012, 16(1):57-62.
【3】张清, 李全安, 文九巴, 等. 温度和压力对N80钢CO2/H2S腐蚀速率的影响[J]. 石油矿场机械, 2004, 33(3):42-44.
【4】ZHANG G A, CHENG Y F. Localized corrosion of carbon steel in a CO2-saturated oilfield formation water[J]. Electrochimica Acta, 2011, 56(3):1676-1685.
【5】孙建波, 柳伟, 路民旭. 成分和组织影响钢CO2腐蚀的研究进展[J]. 中国腐蚀与防护学报, 2008, 28(4):246-250.
【6】ASMARA Y P, ISMAIL M F, CHUI L G, et al. Predicting effects of corrosion erosion of high strength steel pipelines elbow on CO2-acetic acid (HAc) solution[J]. IOP Conference Series:Materials Science and Engineering, 2016, 114:012128.
【7】黄丽, 陈昱铭, 韩鑫, 等. 基于正交实验的水源井水腐蚀影响因素及腐蚀预测[J]. 辽宁石油化工大学学报, 2018, 38(6):54-58.
【8】丁博钊, 唐洪明, 高建崇, 等. 绥中36-1油田水源井结垢产物与机理分析[J]. 油田化学, 2013, 30(1):115-118, 127.
【9】CHOI Y S, NESIC S, LING S. Effect of H2S on the CO2 corrosion of carbon steel in acidic solutions[J]. Electrochimica Acta, 2011, 56(4):1752-1760.
【10】刘宏伟, 陈翠颖, 张雨轩, 等. 油气田微生物腐蚀与防护研究进展[J]. 装备环境工程, 2020, 17(11):1-9.
【11】陈钦伟, 高永华, 甄宝生, 等. 渤海自营油田水源井防腐管材现状与展望[J]. 中国石油和化工标准与质量, 2017, 37(20):69-71, 73.
【12】樊学华, 祝亚男, 于勇, 等. 油气田管道HDPE内衬技术的应用[J]. 油气储运, 2021, 40(3):326-332.
【2】RUSTANDI A, ADYUTATAMA M, FADLY E, et al. Corrosion rate of carbon steel for flowline and pipeline as transmission pipe in natural gas production with CO2 content[J]. Makara Journal of Technology, 2012, 16(1):57-62.
【3】张清, 李全安, 文九巴, 等. 温度和压力对N80钢CO2/H2S腐蚀速率的影响[J]. 石油矿场机械, 2004, 33(3):42-44.
【4】ZHANG G A, CHENG Y F. Localized corrosion of carbon steel in a CO2-saturated oilfield formation water[J]. Electrochimica Acta, 2011, 56(3):1676-1685.
【5】孙建波, 柳伟, 路民旭. 成分和组织影响钢CO2腐蚀的研究进展[J]. 中国腐蚀与防护学报, 2008, 28(4):246-250.
【6】ASMARA Y P, ISMAIL M F, CHUI L G, et al. Predicting effects of corrosion erosion of high strength steel pipelines elbow on CO2-acetic acid (HAc) solution[J]. IOP Conference Series:Materials Science and Engineering, 2016, 114:012128.
【7】黄丽, 陈昱铭, 韩鑫, 等. 基于正交实验的水源井水腐蚀影响因素及腐蚀预测[J]. 辽宁石油化工大学学报, 2018, 38(6):54-58.
【8】丁博钊, 唐洪明, 高建崇, 等. 绥中36-1油田水源井结垢产物与机理分析[J]. 油田化学, 2013, 30(1):115-118, 127.
【9】CHOI Y S, NESIC S, LING S. Effect of H2S on the CO2 corrosion of carbon steel in acidic solutions[J]. Electrochimica Acta, 2011, 56(4):1752-1760.
【10】刘宏伟, 陈翠颖, 张雨轩, 等. 油气田微生物腐蚀与防护研究进展[J]. 装备环境工程, 2020, 17(11):1-9.
【11】陈钦伟, 高永华, 甄宝生, 等. 渤海自营油田水源井防腐管材现状与展望[J]. 中国石油和化工标准与质量, 2017, 37(20):69-71, 73.
【12】樊学华, 祝亚男, 于勇, 等. 油气田管道HDPE内衬技术的应用[J]. 油气储运, 2021, 40(3):326-332.
相关信息