Leakage analysis and detection of thin-walled stainless steel tubes
摘 要
对某电厂存在介质泄漏的薄壁不锈钢管道进行了理化检验,结合晶间腐蚀试验、垢样XRD分析、微观组织检验及漏点分析等方法对泄漏原因进行了分析,结果表明是管子内残留水(工业水)引起的点蚀穿孔导致了泄漏;针对点蚀特征,设计开发了相应的相控阵超声检测工艺,并采用相控阵超声横波自聚焦换能器对焊接接头处点蚀类缺陷进行了检测。试验结果表明,该工艺可有效检出样管处的典型点蚀缺陷,检测高效,结果直观。
Abstract
A physical and chemical inspection was conducted on a thin-walled stainless steel pipeline with medium leakage in one power plant. The cause of the leakage was analyzed using methods such as intergranular corrosion test, scale sample XRD analysis, microstructure inspection, and leakage point analysis. The results showed that the leakage was caused by pitting corrosion perforation caused by residual water (industrial water) in the pipeline. Based on the characteristics of pitting corrosion, a corresponding phased array ultrasonic testing process was designed and developed, and an ultrasonic phased array transverse wave self focusing transducer was used to detect pitting corrosion defects at welded joints. The experimental results showed that this process can effectively detect typical pitting corrosion defects at the tube sample, with efficient detection and intuitive results.
中图分类号 TG115.28 TG142.23 DOI 10.11973/wsjc202306011
所属栏目 试验研究
基金项目
收稿日期 2022/10/25
修改稿日期
网络出版日期
作者单位点击查看
备注赵阳(1988-),男,硕士,工程师,主要从事核电站金属材料的检验检测工作
引用该论文: ZHAO Yang,WANG Fei,WANG Ningning,ZHU Ruiying,WEI Yabing. Leakage analysis and detection of thin-walled stainless steel tubes[J]. Nondestructive Testing, 2023, 45(6): 52~56
赵阳,王飞,汪宁宁,朱芮颍,魏亚兵. 薄壁不锈钢管道的泄漏分析与检测[J]. 无损检测, 2023, 45(6): 52~56
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张思齐.304不锈钢在3.5%NACL溶液中的点蚀行为研究[D].南昌:南昌航空大学, 2018.
【2】宋双官, 郭妍琼, 许可, 等.奥氏体不锈钢点蚀缺陷的相控阵超声检测[J].无损检测, 2021, 43(8):50-57.
【3】石林, 郑志军, 高岩.不锈钢的点蚀机理及研究方法[J].材料导报, 2015, 29(23):79-85.
【4】张宇, 刘亚鹏, 李开伟, 等.南海大气环境下304不锈钢的点蚀特性研究[J].表面技术, 2018, 47(12):44-50.
【5】徐珊.奥氏体不锈钢点蚀行为的研究[D].南昌:南昌航空大学, 2010.
【6】高宝林.浅谈小径管对接焊缝超声波探伤[J].河北电力技术, 1996, 15(5):8-10.
【7】陈永强.薄壁和大曲率压力管道对接焊缝超声检测试验研究与应用[J].无损探伤, 1999, 23(3):6-8, 12.
【8】聂勇.薄壁管的超声检测[J].无损检测, 2002, 24(9):410-411.
【9】樊利国, 荆洪阳.爬波检测及其应用[J].无损检测, 2005, 27(4):212-216.
【10】樊利国, 鲁传高, 段怡雄, 等.相控阵超声波在焊缝检测中的应用研究[J].金属加工(冷加工), 2016(1):263-266.
【2】宋双官, 郭妍琼, 许可, 等.奥氏体不锈钢点蚀缺陷的相控阵超声检测[J].无损检测, 2021, 43(8):50-57.
【3】石林, 郑志军, 高岩.不锈钢的点蚀机理及研究方法[J].材料导报, 2015, 29(23):79-85.
【4】张宇, 刘亚鹏, 李开伟, 等.南海大气环境下304不锈钢的点蚀特性研究[J].表面技术, 2018, 47(12):44-50.
【5】徐珊.奥氏体不锈钢点蚀行为的研究[D].南昌:南昌航空大学, 2010.
【6】高宝林.浅谈小径管对接焊缝超声波探伤[J].河北电力技术, 1996, 15(5):8-10.
【7】陈永强.薄壁和大曲率压力管道对接焊缝超声检测试验研究与应用[J].无损探伤, 1999, 23(3):6-8, 12.
【8】聂勇.薄壁管的超声检测[J].无损检测, 2002, 24(9):410-411.
【9】樊利国, 荆洪阳.爬波检测及其应用[J].无损检测, 2005, 27(4):212-216.
【10】樊利国, 鲁传高, 段怡雄, 等.相控阵超声波在焊缝检测中的应用研究[J].金属加工(冷加工), 2016(1):263-266.
相关信息