TEST ANALYSIS ON STEEL PLATE MATERIAL OF KEY AUTO PARTS
摘 要
分别从原材料、焊接接头力学性能、焊缝化学成分、硬度和金相组织等方面对国产和进口两种牌号钢板进行试验,对试验数据进行对比分析研究,并通过了台架试验,为材料国产化开发提供依据。
Abstract
The material tests were made on imported & localized steel plate from all aspects such as raw material,weld joint mechanics performance,chemical composition,hardness and metallographic structure of weld. And the comparison and analysis were made with the test data,finally the results provide the direction for localization development.
中图分类号 U465
所属栏目 试验与研究
基金项目
收稿日期 2006/12/29
修改稿日期
网络出版日期
作者单位点击查看
备注李张银(1968-),男,工程师,学士。
引用该论文: LI Zhang-yin,WU Gui-gen,QIAN Xiong-song. TEST ANALYSIS ON STEEL PLATE MATERIAL OF KEY AUTO PARTS[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2007, 43(10): 502~504
李张银,吴贵根,钱雄松. 汽车关键零部件用钢板材料试验分析[J]. 理化检验-物理分册, 2007, 43(10): 502~504
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】汪 宛,俞继伦.中国机械工业标准汇编 焊接与切割卷(下)[M].北京:中国标准出版社,1999:16,24,80.
相关信息