• 中国科技论文统计源期刊
  • 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • Scopus数据库全文收录期刊
  • 中国学术期刊综合评价数据库来源期刊
Advanced Search
WAN Bin, ZHAO Yuantao, LI Wenge. Effect of Chemical Milling Parameters on AFM of TA15 Titanium Alloy[J]. Corrosion & Protection, 2024, 45(10): 82-87. DOI: 10.11973/fsyfh210606
Citation: WAN Bin, ZHAO Yuantao, LI Wenge. Effect of Chemical Milling Parameters on AFM of TA15 Titanium Alloy[J]. Corrosion & Protection, 2024, 45(10): 82-87. DOI: 10.11973/fsyfh210606

Effect of Chemical Milling Parameters on AFM of TA15 Titanium Alloy

More Information
  • Received Date: December 17, 2021
  • The effects of chemical milling parameters such as stirring speed, solution ratio, placement position, chemical milling time, additive content, and chemical milling temperature on the microstructure of TA15 titanium alloy were investigated in this experiment, and the morphology of the allay was characterized by atomic force microscope (AFM). The results show that increasing the stirring speed, solution ratio, chemical milling time, and additives would make surface roughness of TA15 titanium alloy decreases. As the chemical milling temperature increased, surface roughness increased first and then decreased. The placement position had little effect on the surface roughness of TA15 titanium alloy.

  • [1]
    刘铭悦, 黄志全, 张习羽, 等. 非平衡磁控溅射CrTiAlN涂层的制备及空蚀性能研究 [J]. 表面技术, 2023, 52(10):367-375.

    LIU M Y, HUANG Z Q, ZHANG X Y, et al. Preparation and cavitation erosion resistance of CrTiAlN coatings by unbalanced magnetron sputtering [J]. Surface Technology, 2023, 52(10):367-375.
    [2]
    赵言医用合金材料磁流变超光滑抛光加工研究广州广东工业大学2021赵言. 医用合金材料磁流变超光滑抛光加工研究 [D]. 广州: 广东工业大学, 2021.

    ZHAO YStudy on magnetorheological ultra-smooth polishing of medical alloy materialsGuangzhouGuangdong University of Technology2021ZHAO Y. Study on magnetorheological ultra-smooth polishing of medical alloy materials [D]. Guangzhou: Guangdong University of Technology, 2021.
    [3]
    莫咏怡, 蔺小军, 田培森, 等. 不同刀具倾角下切削参数对TC4表面形貌影响规律研究 [J]. 工具技术, 2024, 58(3):43-48.

    MO Y Y, LIN X J, TIAN P S, et al. Study on influence of cutting parameters on surface morphology of TC4 at different tool angles [J]. Tool Engineering, 2024, 58(3):43-48.
    [4]
    王晓明, 韩江. TC4钛合金高速铣削表面粗糙度研究 [J]. 机械设计与制造, 2019(5):232-236,240.

    WANG X M, HAN J. Study on surface roughness of high speed milling of TC4 titanium alloy [J]. Machinery Design & Manufacture, 2019(5):232-236,240.
    [5]
    王慧, 李南奇, 赵国超, 等. 基于航空铸造钛合金Ti-6Al-4V高速铣削参数的表面质量及切削效率优化 [J]. 表面技术, 2022, 51(2):331-337,346.

    WANG H, LI N Q, ZHAO G C, et al. Optimization of surface quality and cutting efficiency for high-speed milling parameters of titanium alloy Ti-6Al-4V for aviation casting [J]. Surface Technology, 2022, 51(2):331-337,346.
    [6]
    储成龙, 刘长毅. 钛合金TC4高速铣削表面微观几何形貌仿真 [J]. 机械制造与自动化, 2010, 39(4):94-96.

    CHU C L, LIU C Y. Prediction of surface roughness of Ti alloy TC4 on high speed milling [J]. Machine Building & Automation, 2010, 39(4):94-96.
    [7]
    杨东, 贾天浩. TC4钛合金侧铣加工表面形貌分析及工艺参数优化 [J]. 海军航空大学学报, 2024, 39(1):131-138.

    YANG D, JIA T H. Surface morphology and parametric optimization of peripheral milling TC4 titanium alloy [J]. Journal of Naval Aviation University, 2024, 39(1):131-138.
    [8]
    邵勇, 孙树峰, 王萍萍, 等. 医用TC4钛合金激光-化学复合抛光及表面形貌演化 [J]. 中国表面工程, 2024, 37(2):227-237.

    SHAO Y, SUN S F, WANG P P, et al. Laser-chemical composite polishing and surface morphology evolution of medical TC4 titanium alloy [J]. China Surface Engineering, 2024, 37(2):227-237.
    [9]
    林翠, 梁静, 赵晴, 等. TA15钛合金腐蚀加工工艺研究 [J]. 材料工程, 2010, 38(8):51-55.

    LIN C, LIANG J, ZHAO Q, et al. Technology of corrosion processing of TA15 titanium alloy [J]. Journal of Materials Engineering, 2010, 38(8):51-55.
    [10]
    赵静, 周培培, 王晨羽. 钛合金TA15切削过程切削用量对表面粗糙度的影响 [J]. 机械工程与自动化, 2018(3):129-131.

    ZHAO J, ZHOU P P, WANG C Y. Effects on surface roughness of titanium alloy (TA15) cutting process caused by cutting amount [J]. Mechanical Engineering & Automation, 2018(3):129-131.
    [11]
    王明海, 王京刚, 郑耀辉, 等. 钛合金TA15高速铣削表面形貌及组织研究 [J]. 机床与液压, 2014, 42(23):71-74,78.

    WANG M H, WANG J G, ZHENG Y H, et al. Study on surface morphology and microstructure of titanium alloy TA15under high-speed milling [J]. Machine Tool & Hydraulics, 2014, 42(23):71-74,78.
    [12]
    王奔, 赵家兴, 张秀云, 等. 侧铣削参数对TC4钛合金表面粗糙度及材料去除率的影响 [J]. 工具技术, 2021, 55(12):9-12.

    WANG B, ZHAO J X, ZHANG X Y, et al. Effect of side milling parameters on surface roughness and material removal rate of TC4 titanium alloy [J]. Tool Engineering, 2021, 55(12):9-12.
    [13]
    伍娅, 乔虎, 曹岩. 砂带磨削钛合金表面粗糙度工艺参数的敏感性研究 [J]. 制造技术与机床, 2022(6):129-133.

    WU Y, QIAO H, CAO Y. Study on sensitivity of technical parameters of abrasive belt grinding of titanium alloy surface roughness [J]. Manufacturing Technology & Machine Tool, 2022(6):129-133.
    [14]
    李远博, 邵明辉, 李顺才, 等. 钛合金铣削表面粗糙度检测及多元预测模型研究 [J]. 现代制造工程, 2023(3):96-104.

    LI Y B, SHAO M H, LI S C, et al. Study on surface roughness measurement and multivariate prediction model of titanium alloy milling [J]. Modern Manufacturing Engineering, 2023(3):96-104.
    [15]
    王荣华, 汪振华. TC4钛合金铣削力及表面粗糙度分析 [J]. 工具技术, 2021, 55(5):30-33.

    WANG R H, WANG Z H. Analysis of milling force and surface roughness of TC4 titanium alloy [J]. Tool Engineering, 2021, 55(5):30-33.
    [16]
    蔡雨升, 韩洪智, 任德春, 等. 化学腐蚀工艺对激光选区熔化成形TC4钛合金表面粗糙度的影响 [J]. 材料研究学报, 2022, 36(6):435-442

    CAI Y S, HAN H Z, REN D C, et al. The effect of chemical corrosion process on the surface roughness of TC4 titanium alloy formed by laser selective melting [J]. Journal of Materials Research  2022, 36(6):435-442.

Catalog

    Article views (34) PDF downloads (10) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return