Research Progress on Improving Plasma-Sprayed Coating Properties by Laser Remelting

ZHAO Dongdong; RONG Xiancheng; ZHANG Shitao; ZHAO Zhongxian; LI Wenge; ZHAO Yuantao

doi:10.11973/jxgccl230012

Materials and Mechanical Engineering > 2025 > 49(4): 1-7. > DOI: 10.11973/jxgccl230012

ZHAO Dongdong, RONG Xiancheng, ZHANG Shitao, ZHAO Zhongxian, LI Wenge, ZHAO Yuantao. Research Progress on Improving Plasma-Sprayed Coating Properties by Laser Remelting[J]. Materials and Mechanical Engineering, 2025, 49(4): 1-7. DOI: 10.11973/jxgccl230012

Citation:

Research Progress on Improving Plasma-Sprayed Coating Properties by Laser Remelting

1.
Merchant Marine College, Shanghai Maritime University, Shanghai 201306, China
2.
Shengtong Intelligent Machinery Equipment (Shanghai) Co.,Ltd., Shanghai 201400, China

More Information

Received Date: January 09, 2023
Revised Date: February 19, 2025
Available Online: March 31, 2025

Graphical Abstract

Abstract

Abstract

Plasma-spraying can melt powders with high hardness and high melting point and has no special requirements to the substrate, and is widely used in the preparation of metal, ceramic and composite coatings. Laser remelting can effectively eliminate the inherent defects of plasma-sprayed coatings, such as layered structure, pores and micro-cracks, and improve bonding between the coating and substrate, so as to improve the properties of plasma-sprayed coating. The research progress on plasma-sprayed coatings modified by laser remelting is summarized from three aspects of plasma-sprayed metal coating, ceramic coating and composite coating. The existing problems in the current research are discussed, and the future research direction is prospected.
- laser remelting,
- plasma-sprayed,
- coating,
- high-entropy alloy,
- ceramics,
- property

FullText(HTML)

References (61)

References

[1]	左敦稳，张春明，王珉. 等离子喷涂技术研究与发展现状[J]. 机械制造，1998，36（9）：4-6. ZUO D W ，ZHANG C M ，WANG M. Study and carrend development of plasma spraying technique[J]. Machinery，1998，36（9）：4-6.
[2]	姚培，何谋海. 等离子喷涂技术发展现状及应用[J]. 中国-东盟博览，2013，（10）：330-330. YAO P ，HE M H. Development status and application of plasma spraying technology[J]. China-Asean Panorama，2013，（10）：330-330.
[3]	WRONA A ，BILEWSKA K ，LIS M ，et al. Antimicrobial properties of protective coatings produced by plasma spraying technique[J]. Surface and Coatings Technology，2017，318：332-340.
[4]	GOBERMAN D ，SOHN Y H ，SHAW L ，et al. Microstructure development of Al₂O₃–13wt.%TiO₂ plasma sprayed coatings derived from nanocrystalline powders[J]. Acta Materialia，2002，50（5）：1141-1152.
[5]	QIAO X ，WANG Y M ，WENG W X ，et al. Influence of pores on mechanical properties of plasma sprayed coatings：Case study of YSZ thermal barrier coatings[J]. Ceramics International，2018，44（17）：21564-21577.
[6]	李力. 喷涂距离对等离子喷涂Al₂O₃陶瓷涂层结构性能的影响[J]. 航天制造技术，2017（4）：52-53. LI L. Influences of spray distances on microstructure and properties of alumina coatings[J]. Aerospace Manufacturing Technology，2017（4）：52-53.
[7]	KOSHURO V ，OSIPOVA E ，MARKELOVA O ，et al. Titanium oxide coatings formed by plasma spraying followed by induction heat treatment[J]. Ceramics International，2023，49（2）：2034-2043.
[8]	李成龙，李文戈，赵远涛，等. 降低等离子喷涂涂层孔隙率的研究进展[J]. 机械工程材料，2020，44（5）：60-65. LI C L ，LI W G ，ZHAO Y T ，et al. Research progress on porosity reduction in plasma sprayed coatings[J]. Materials for Mechanical Engineering，2020，44（5）：60-65.
[9]	BOBZIN K ，ZHAO L D ，HEINEMANN H ，et al. Influence of the atmospheric plasma spraying parameters on the coating structure and the deposition efficiency of silicon powder[J]. The International Journal of Advanced Manufacturing Technology，2022，123（1）：35-47.
[10]	GOU J F ，ZHANG J ，ZHANG Q W ，et al. Effect of nano-Si₃N₄ additives and plasma treatment on the dry sliding wear behavior of plasma sprayed Al₂O₃-8YSZ ceramic coatings[J]. Journal of Thermal Spray Technology，2017，26（4）：764-777.
[11]	LIU L M ，XU H F ，XIAO J K ，et al. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings[J]. Surface and Coatings Technology，2017，325：548-554.
[12]	JIANG C P ，CHEN H ，WANG G ，et al. Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting[J]. Journal of Thermal Spray Technology，2017，26（4）：778-786.
[13]	LI Y J ，DONG S Y ，YAN S X ，et al. Elimination of voids by laser remelting during laser cladding Ni based alloy on gray cast iron[J]. Optics and Laser Technology，2019，112：30-38.
[14]	陈松，董天顺，李国禄，等. 热喷涂层的重熔技术及其发展现状[J]. 焊接技术，2016，45（5）：76-79. CHEN S ，DONG T S ，LI G L ，et al. Remelting technology of thermal spray coating and its development status[J]. Welding Technology，2016，45（5）：76-79.
[15]	王东生，田宗军. 激光重熔等离子喷涂双层结构热障涂层制备工艺研究现状及其发展[J]. 应用激光，2019，39（3）：416-422. WANG D S ，TIAN Z J. Research status and development in processing methods of plasma-sprayed double-layer structure thermal barrier coatings by laser remelting[J]. Applied Laser，2019，39（3）：416-422.
[16]	刘立群，周泽华，王泽华，等. 激光重熔处理等离子喷涂陶瓷涂层的研究现状及展望[J]. 陶瓷学报，2012，33（2）：235-240. LIU L Q ，ZHOU Z H ，WANG Z H ，et al. Present situation and prospects of laser remelted plasma sprayed coatings[J]. Journal of Ceramics，2012，33（2）：235-240.
[17]	XU L ，JIA Y D ，ZHANG L B ，et al. Fabrication of NiAl intermetallic alloy integrated materials chips with continuous one-dimensional composition gradients by plasma spray deposition and laser remelting[J]. Materials Letters，2021，284：128944.
[18]	付静波，赵宝华. 国内外钼工业发展现状[J]. 稀有金属，2007，31（增刊1）：151-154. FU J B ，ZHAO B H. Present states of development of molybdenum industry at home and abroad[J]. Chinese Journal of Rare Metals，2007，31（S1）：151-154.
[19]	TREFON-RADZIEJEWSKA D ，JUSZCZYK J ，FLEMING A ，et al. Thermophysical properties of refractory W-50.4%Re and Mo-39.5%Re thin alloy layers deposited on silicon and silica substrates[J]. International Journal of Refractory Metals and Hard Materials，2020，87：105147.
[20]	RYBIN D K ，BATRAEV I S ，DUDINA D V ，et al. Deposition of tungsten coatings by detonation spraying[J]. Surface and Coatings Technology，2021，409：126943.
[21]	ZHOU H ，PENG C. Effect of shroud in plasma spraying on chemical composition and thickness of titanium coatings[J]. Coatings，2021，11（4）：446.
[22]	MANJUNATHA S S ，MANJAIAH M. Characterization of laser remelted plasma-sprayed Mo coating on AISI 1020 steel[J]. Silicon，2017，9（5）：741-751.
[23]	王进利用激光重熔制备纯钛表面高温耐氧化涂层技术的研究沈阳沈阳工业大学2019王进. 利用激光重熔制备纯钛表面高温耐氧化涂层技术的研究[D]. 沈阳：沈阳工业大学，2019. WANG JResearch on high-temperature oxidation resistant coating technology on pure titanium surface prepared by laser remeltingShenyangShenyang University of Technology2019WANG J. Research on high-temperature oxidation resistant coating technology on pure titanium surface prepared by laser remelting[D]. Shenyang：Shenyang University of Technology，2019.
[24]	ŚLIWŃSKI P ，WĘGLOWSKI M S ，DWORAK J ，et al. Effect of laser remelting of plasma sprayed coating of Cr-Ni-Re[J]. Insititute of Physics Conference Series：Materials Science and Engineering，2021，1140（1）：012054.
[25]	XU L ，JIA Y D ，ZHANG L B ，et al. Fabrication of NiAl intermetallic alloy integrated materials chips with continuous one-dimensional composition gradients by plasma spray deposition and laser remelting[J]. Materials Letters，2021，284：128944.
[26]	LIAO J ，ZHANG L B ，PENG C ，et al. Fabrication of Ni-Cu-W graded coatings by plasma spray deposition and laser remelting[J]. Materials，2022，15（8）：2911.
[27]	JIN B Q ，ZHANG N N ，GUAN S ，et al. Microstructure and properties of laser re-melting FeCoCrNiAl_0.5Si_x high-entropy alloy coatings[J]. Surface and Coatings Technology，2018，349：867-873.
[28]	JIN B Q ，ZHANG N N ，YU H S ，et al. Al_xCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance[J]. Surface and Coatings Technology，2020，402：126328.
[29]	JIN B Q ，ZHANG N N ，YIN S. Strengthening behavior of AlCoCrFeNi（TiN）_x high-entropy alloy coatings fabricated by plasma spraying and laser remelting[J]. Journal of Materials Science and Technology，2022，121：163-173.
[30]	叶宏明. 先进陶瓷材料的制备及设计[J]. 浙江树人大学学报，2004，4（6）：80-84. YE H M. Preparation and design of advanced ceramic materials[J]. Journal of Zhejiang Shuren University，2004，4（6）：80-84.
[31]	OUYANG J H ，LI X D. Laser remelting of plasma-sprayed yttria partially stabilized zirconia coatings[J]. Journal of Materials Engineering and Performance，2000，9（5）：516-521.
[32]	ANTOU G ，HLAWKA F ，CORNET A ，et al. Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high-power laser diode[J]. Journal of Thermal Spray Technology，2004，13（3）：381-389.
[33]	ZHOU Y ，XU L F ，ZHENG H Z ，et al. Surface modification of plasma spraying Al₂O₃–13 wt% TiO₂ coating by laser remelting technique[J]. Materials Research Express，2022，9（5）：056401.
[34]	崔静，郭玉珠，庞铭，等. 激光与等离子复合制备的隔热涂层微观特性与力学性能研究[J]. 激光与光电子学进展，2020，57（15）：142-148. CUI J ，GUO Y Z ，PANG M ，et al. Microstructure and mechanical properties of thermal insulating coating prepared by laser and plasma[J]. Laser and Optoelectronics Progress，2020，57（15）：142-148.
[35]	YANG K ，LI J Q ，WANG Q Y ，et al. Effect of laser remelting on microstructure and wear resistance of plasma sprayed Al₂O₃-40%TiO₂ coating[J]. Wear，2019，426：314-318.
[36]	DAS B ，NATH A K ，BANDYOPADHYAY P P. Online monitoring of laser remelting of plasma sprayed coatings to study the effect of cooling rate on residual stress and mechanical properties[J]. Ceramics International，2018，44（7）：7524-7534.
[37]	YU J B ，WANG Y ，ZHOU F F ，et al. Laser remelting of plasma-sprayed nanostructured Al₂O₃–20wt.% ZrO₂ coatings onto 316L stainless steel[J]. Applied Surface Science，2018，431：112-121.
[38]	DAVIS J R. Surface engineering for corrosion and wear resistance[M]. OhiO：American Society for Metals International，2001.
[39]	DAS B ，NATH A ，BANDYOPADHYAY P P. Scratch resistance and damage mechanism of laser remelted thermally sprayed ceramic coating[J]. Surface and Coatings Technology，2019，364：157-169.
[40]	HAZRA S ，BANDYOPADHYAY P P. Tribological properties of plasma sprayed zircon-alumina powder mixture with and without laser re-melting[J]. Transactions of the Insititute of Metal Finishing，2020，98（3）：144-153.
[41]	FENG Y ，DONG T S ，LI G L ，et al. The roles of stress in the thermal shock failure of YSZ TBCs before and after laser remelting[J]. Journal of Alloys and Compounds，2020，828：154417.
[42]	FENG Y ，DONG T S ，LI G L ，et al. High temperature oxidation resistance and TGO growth mechanism of laser remelted thermal barrier coatings[J]. Journal of Alloys and Compounds，2020，828：154266.
[43]	DAS B ，BRODARD P ，BANDYOPADHYAY P P. Raman spectroscopy assisted residual stress measurement of plasma sprayed and laser remelted zirconia splats and coatings[J]. Surface and Coatings Technology，2019，378：124920.
[44]	任雨松，花国然，罗新华，等. 激光重熔Al₂O₃+13%wt. TiO₂-SiC纳米复合陶瓷涂层组织[J]. 南通职业大学学报（综合版），2005，19（4）：1-4. REN Y S ，HUA G R ，LUO X H ，et al. Research on nanocomposite aeramic coating of Al₂O₃+13%wt. TiO₂ by laser remelting of nano-SiC[J]. Journal of Nantong Vocational College，2005，19（4）：1-4.
[45]	花国然，罗新华，黄因慧，等. 以纳米SiC为填料的激光重熔等离子喷涂陶瓷涂层组织及耐腐蚀性能的研究[J]. 应用激光，2004，24（4）：203-206. HUA G R ，LUO X H ，HUANG Y H ，et al. Research on microstructure and corrosion characteristics of plasma-sprayed ceramic coating by laser remelting of nano-SiC stuffing[J]. Applied Laser，2004，24（4）：203-206.
[46]	赵长浩，杨玲伟，肖学仁，等. 激光重熔改性热障涂层抗CMAS腐蚀特性[J]. 航空材料学报，2022，42（1）：40-49. ZHAO C H ，YANG L W ，XIAO X R ，et al. Improving molten CMAS resistance of thermal barrier coatings by modified laser remelting method[J]. Journal of Aeronautical Materials，2022，42（1）：40-49.
[47]	GRIMM M ，LINDNER T ，LAMPKE T. Effects of laser-remelting on the microstructure，hardness and oscillating wear resistance of atmospheric plasma sprayed alumina-rich coatings[J]. Coatings，2022，12（6）：721.
[48]	XU L F ，WANG D S. Grain growth characteristics of plasma-sprayed nanostructured Al₂O₃-13wt.%TiO₂ coatings during laser remelting[J]. Ceramics International，2021，47（11）：15052-15058.
[49]	CUBERO Á ，MARTÍNEZ E ，DE LA FUENTE G F ，et al. Large enhancement of thermal conductance at ambient and cryogenic temperatures by laser remelting of plasma-sprayed Al₂O₃ coatings on Cu[J]. Materials Research Bulletin，2021，143：111450.
[50]	虞礼嘉，梁文萍，林浩，等. 激光重熔YSZ热障涂层950 ℃的热腐蚀行为[J]. 中国腐蚀与防护学报，2019，39（1）：77-82. YU L J ，LIANG W P ，LIN H ，et al. Evaluation of hot corrosion behavior of laser as-remelted YSZ thermal barrier coatings at 950 ℃[J]. Journal of Chinese Society for Corrosion and Protection，2019，39（1）：77-82.
[51]	杜善义. 先进复合材料与航空航天[J]. 复合材料学报，2007，24（1）：1-12. DU S Y. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica，2007，24（1）：1-12.
[52]	倪晓杰，开佳伟，尹莉，等. 船舶维修与再制造用Mo₂NiB₂基金属陶瓷及涂层的制备和研究现状[J]. 机械工程材料，2021，45（5）：8-14. NI X J ，KAI J W ，YIN L ，et al. Preparation and research status of Mo₂NiB₂-based cermet and coating for maintenance and remanufacture of ships[J]. Materials for Mechanical Engineering，2021，45（5）：8-14.
[53]	江志强，席守谋，李华伦. 激光表面重熔等离子喷涂陶瓷涂层的研究与发展[J]. 材料工程，1999，27（1）：46-48. JIANG Z Q ，XI S M ，LI H L. Research and development trends of plasma sprayed ceramic coating by laser remelting[J]. Journal of Materials Engineering，1999，27（1）：46-48.
[54]	MATEOS J ，CUETOS J M ，VIJANDE R ，et al. Tribological properties of plasma sprayed and laser remelted 75/25 Cr₃C₂/NiCr coatings[J]. Tribology International，2001，34（5）：345-351.
[55]	赵运才，上官绪超，张继武，等. 激光重熔改性WC/Fe等离子喷涂涂层组织及其耐磨性能[J]. 表面技术，2018，47（3）：20-27. ZHAO Y C ，SHANGGUAN X C ，ZHANG J W ，et al. Microstructure and wear resistance of WC/Fe plasma sprayed coatings modified by laser remelting[J]. Surface Technology，2018，47（3）：20-27.
[56]	何文，赵运才，张佳茹. 激光重熔对Ni/WC涂层组织结构的改善机制研究[J]. 激光与红外，2017，47（12）：1486-1491. HE W ，ZHAO Y C ，ZHANG J R. Study on improvement mechanism of laser remelting on the Ni/WC coating microstructure[J]. Laser & Infrared，2017，47（12）：1486-1491.
[57]	上官绪超，赵运才，徐颖，等. 激光功率对WC颗粒增强铁基复合涂层摩擦学性能的影响[J]. 金属热处理，2018，43（3）：56-61. SHANGGUAN X C ，ZHAO Y C ，XU Y ，et al. Effect of laser power on tribological properties of WC particles reinforced iron-based composite coating[J]. Heat Treatment of Metals，2018，43（3）：56-61.
[58]	赵运才，何文，张佳茹. 扫描速度对激光重熔金属陶瓷涂层温度场的影响[J]. 润滑与密封，2017，42（10）：23-30. ZHAO Y C ，HE W ，ZHANG J R. Effect of scanning speed on the temperature field of laser remelted cermet coating[J]. Lubrication Engineering，2017，42（10）：23-30.
[59]	赵运才，杜辉辉，上官绪超，等. 激光重熔轨迹对Fe基Ni/WC涂层组织和性能的影响[J]. 激光与光电子学进展，2018，55（4）：275-282. ZHAO Y C ，DU H H ，SHANGGUAN X C ，et al. Influences of laser remelting trajectories on microstructures and properties of Fe-based Ni/WC coatings[J]. Laser and Optoelectronics Progress，2018，55（4）：275-282.
[60]	WANG C M ，YU J X ，ZHANG Y ，et al. Phase evolution and solidification cracking sensibility in laser remelting treatment of the plasma-sprayed CrMnFeCoNi high entropy alloy coating[J]. Materials and Design，2019，182：108040.
[61]	陈传忠，雷廷权，包全合，等. 等离子喷涂-激光重熔陶瓷涂层存在问题及改进措施[J]. 材料科学与工艺，2002，10（4）：431-435. CHEN C Z ，LEI T Q ，BAO Q H ，et al. Problems and the improving measures in laser remelting of plasma sprayed ceramic coatings[J]. Material Science and Technology，2002，10（4）：431-435.

Cited By

Get Citation

XML

Article views (77) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Research Progress on Improving Plasma-Sprayed Coating Properties by Laser Remelting

Abstract

References

Catalog

Export File

Citation

Format

Content