- 中文核心期刊
- CSCD中国科学引文数据库来源期刊
- 中国科技核心期刊
- 中国机械工程学会材料分会会刊
| Citation: |
BAO Xinyu, MA Yonglin, TANG Yuanlu, MA Yuanyuan, HUANG Yuxin. Effect of Pulsed Magnetic Field Melt Treatment on Solidification Structure of 5005 Aluminum Alloy Flat Ingot with Different Duty Cycle[J]. Materials and Mechanical Engineering, 2025, 49(2): 16-22. DOI: 10.11973/jxgccl230558
|
In the semi-continuous casting process of 5005 aluminum alloy flat ingot with cross-section size of 1 330 mm×460 mm. The aluminum alloy melt in distribution launder was treated by pulsed magnetic field with duty cycles of 40%, 50% and 60% with applying self-developed pulsed magnetic field melt treatment device. The effect of pulsed magnetic duty cycle on solidification structure and element segregation of 5005 aluminum alloy flat ingot was studied. The results show that the solidification structure of 5005 aluminum alloy flat ingot could be refined significantly by applying pulsed magnetic field on melt. With the increase of pulsed magnetic field duty cycle, the α-Al grain thinning effect was weakened. When the duty cycle of pulse magnetic field was 40%, the α-Al grains at different positions of the flat ingot cross-section were the smallest, and the α-Al grains at the center were refined by 24.8% with those without pulsed magnetic field treatment. With the increase of the pulsed magnetic duty cycle, the microstructure uniformity of the flat ingot decreased. When the pulsed magnetic duty cycle was 40%, the microstructure uniformity of the flat ingot was the highest, and the difference of α-Al grain size between the thickness edge and the center of the ingot was 6.6%. After the pulsed magnetic field melt treatment with 40% duty cycle, the macrosegregation of alloying elements in the flat ingot was reduced.
| [1] |
汤波楷,章国华,陈登斌,等. 5005铝合金带材纵向条纹色差缺陷产生的原因及其改善措施[J]. 轻合金加工技术,2023,51（1）：18-22.
TANG B K ,ZHANG G H ,CHEN D B ,et al. Cause and improvement of longitudinal streak aberration defect of 5005 aluminum alloy strip[J]. Light Alloy Fabrication Technology,2023,51（1）：18-22.
|
| [2] |
吴俊子,胡文鑫,贾锦玉,等. 铈对5005铝合金组织和性能的影响[J]. 稀土,2017,38（4）：81-87.
WU J Z ,HU W X ,JIA J Y ,et al. Effect of cerium on microstructure and properties of 5005 aluminum alloy[J]. Chinese Rare Earths,2017,38（4）：81-87.
|
| [3] |
李军,夏明许,胡侨丹,等. 大型铸锭均质化问题及其新解[J]. 金属学报,2018,54（5）：773-788.
LI J ,XIA M X ,HU Q D ,et al. Solutions in improving homogeneities of heavy ingots[J]. Acta Metallurgica Sinica,2018,54（5）：773-788.
|
| [4] |
李宝绵,夏军,张海涛,等. DC铸造5182铝合金大尺寸扁锭偏析及微观组织的试验研究[J]. 轻合金加工技术,2020,48（12）：25-31.
LI B M ,XIA J ,ZHANG H T ,et al. Experimental research on segregation and microstructure of 5182 large-sized slab cast by DC casting[J]. Light Alloy Fabrication Technology,2020,48（12）：25-31.
|
| [5] |
薛菲,曹零勇,冯伟骏. 显微分析在大生产AlMgSi铝合金扁铸锭低倍异常组织分析中的综合应用[J]. 宝钢技术,2022（6）：45-51.
XUE F ,CAO L Y ,FENG W J. Application of microanalysis on the failure analysis of macro abnormal grains in Al-Mg-Si flat ingot[J]. Baosteel Technology,2022（6）：45-51.
|
| [6] |
周杰,郭伟玲,王志远,等. 基于磁场作用下的金属凝固研究现状[J]. 中国表面工程,2022,35（3）：154–169.
ZHOU J ,GUO W L ,WANG Z Y ,et al. Research status of metal solidification based on magnetic field[J]. China Surface Engineering,2022,35（3）：154–169.
|
| [7] |
张磊,邢志国,王海斗,等. 脉冲磁场对合金凝固过程影响的研究进展[J]. 材料导报,2023,37（14）：86-96.
ZHANG L ,XING Z G ,WANG H D ,et al. Research progress of the effect of pulsed magnetic field on the solidification process of alloys[J]. Materials Reports,2023,37（14）：86-96.
|
| [8] |
CUI J Z ,ZHANG H T ,ZUO Y B. DC casting of large sized ingot of a high strength 7xxx alloy under the influence of electromagnetic field[J]. Materials Science Forum,2013,765：165-169.
|
| [9] |
ZUO Y B ,CUI J Z ,MOU D ,et al. Effect of electromagnetic field on microstructure and macrosegregation of flat ingot of 2524 aluminium alloy[J]. Transactions of Nonferrous Metals Society of China,2014,24（7）：2408-2413.
|
| [10] |
FREDRIKSSON H ,FREDRIKSSON E. A model of liquid metals and its relation to the solidification process[J]. Materials Science and Engineering：A,2005,413/414：455-459.
|
| [11] |
KELTON K F ,GREER A L. Nucleation in condensed matter applications in materials and biology[M]. Amsterdam：Pergamon,2010.
|
| [12] |
BAO X Y ,MA Y L ,HUANG R Y ,et al. Effects of PMMT on microstructure and macrosegregation of large-sized 6061 alloy billet[J]. Materials Science and Technology,2023,39（17）：2699-2706.
|
| [13] |
冯艳飞,王军,白庆伟,等. 矩形波磁场对7A04铝合金凝固组织的细化研究[J]. 特种铸造及有色合金,2017,37（11）：1254-1258.
FENG Y F ,WANG J ,BAI Q W ,et al. Refinement of solidification structure of 7A04 aluminum alloy by rectangular wave magnetic field[J]. Special Casting & Nonferrous Alloys,2017,37（11）：1254-1258.
|
| [14] |
BAI Q W ,MA Y L ,XING S Q ,et al. Effect of flow,heat transfer and magnetic energy on the grain refinement of 7A04 alloy under electromagnetic pulse[J]. International Journal of Materials Research,2017,108（12）：1064-1072.
|
| [15] |
白庆伟,麻永林,邢淑清,等. 铝合金表面脉冲电磁场对半连续铸造晶粒的细化[J]. 工程科学学报,2017,39（12）：1828-1834.
BAI Q W ,MA Y L ,XING S Q ,et al. Refining of a DC-casting aluminum alloy structure using surface electromagnetic pulsing[J]. Chinese Journal of Engineering,2017,39（12）：1828-1834.
|
| [16] |
BAO X Y ,MA Y L ,XING S Q ,et al. Effects of pulsed magnetic field melt treatment on grain refinement of Al-Si-Mg-Cu-Ni alloy direct-chill casting billet[J]. Metals,2022,12（7）：1080.
|
| [17] |
NI J ,INCROPERA F P. Extension of the continuum model for transport phenomena occurring during metal alloy solidification II: Microscopic considerations[J]. International Journal of Heat and Mass Transfer,1995,38（7）：1285-1296.
|
| [18] |
NADELLA R ,ESKIN D G ,DU Q ,et al. Macrosegregation in direct-chill casting of aluminium alloys[J]. Progress in Materials Science,2008,53（3）：421-480.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: