• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
WANG Xian, WANG Wenxian, GUO Fengyun, ZHOU Lidan. Interfacial Microstructure and Properties of ZCuSn10P1 Copper Alloy Surfacing SnSb9Cu7 Babbitt Alloy[J]. Materials and Mechanical Engineering, 2025, 49(1): 65-70. DOI: 10.11973/jxgccl240049
Citation: WANG Xian, WANG Wenxian, GUO Fengyun, ZHOU Lidan. Interfacial Microstructure and Properties of ZCuSn10P1 Copper Alloy Surfacing SnSb9Cu7 Babbitt Alloy[J]. Materials and Mechanical Engineering, 2025, 49(1): 65-70. DOI: 10.11973/jxgccl240049

Interfacial Microstructure and Properties of ZCuSn10P1 Copper Alloy Surfacing SnSb9Cu7 Babbitt Alloy

More Information
  • Received Date: January 28, 2024
  • Revised Date: November 19, 2024
  • The SnSb9Cu7 Babbitt alloy as surfacing on the ZCuSn10P1 copper alloy by cold metal transition molten tungsten argon arc welding. The microstructure and micro-composition at the interface were studied, and the bonding strength and micro-nano mechanical properties were tested. The results show that an interfacial layer of about 140 μm thickness was formed between copper alloy and Babbitt alloy cladding layer, indicating that metallurgical bonding. The interface was smooth, and the interfacial layer had no micro-cracks, pores and other defects, and was composed of α+δ phase. The Babbitt alloy cladding layer was composed of SnSb phase, Cu6Sn5 phase and α-Sn matrix. The microstructure of the cladding layer was uniform and fine, no obvious segregation was found, and the hard phase particle size was about 35 μm. The bonding strength of the interface was about 101 MPa, and the fracture mainly occured in hard phases of Babbitt alloy cladding layer. The microhardness of Babbitt alloy cladding layer, copper alloy and the interfacial layer was 6.199, 7.401 and 8.205 GPa, respectively

  • [1]
    郭正兴,何永勇,路新春. 巴氏合金ZSnSb8Cu4的摩擦磨损行为[J]. 润滑与密封,2014,39(7):5-10.

    GUO Z X ,HE Y Y ,LU X C. Tribological performance of tin-based white metal ZSnSb8Cu4[J]. Lubrication Engineering,2014,39(7):5-10.
    [2]
    ZEREN A ,FEYZULLAHOGLU E ,ZEREN M. A study on tribological behaviour of tin-based bearing material in dry sliding[J]. Materials and Design,2007,28(1):318-323.
    [3]
    ZHOU F M ,ZHANG Q Y ,SHI M X ,et al. The effect of TIG arc brazing current on interfacial structure and bonding strength of tin-based babbit[J]. Journal of Adhesion Science and Technology,2017,31(21):2312-2322.
    [4]
    DIOUF P ,JONES A. Investigation of bond strength in centrifugal lining of Babbitt on cast iron[J]. Metallurgical and Materials Transactions A,2010,41(3):603-609.
    [5]
    覃文杰,王琨. 大型汽轮机轴瓦巴氏合金离心浇注工艺研究[J]. 大型铸锻件,2018(4):5-6.

    QIN W J ,WANG K. Research on centrifugal casting process of Babbitt for heavy duty steam turbine bearing bush[J]. Heavy Casting and Forging,2018(4):5-6.
    [6]
    王建梅,薛亚文,马立新,等. 蠕变对巴氏合金ZChSnSb11-6力学性能和显微组织的影响[J]. 中国有色金属学报,2014(10):2513-2518.

    WANG J M ,XUE Y W ,MA L X ,et al. Influence of creep on mechanical properties and microstructures of Babbitt alloy ZChSnSb11-6[J]. The Chinese Journal of Nonferrous Metals,2014(10):2513-2518.
    [7]
    南飞艳,耿建成,薛飞,等. 挂锡质量对巴氏合金浇铸的影响[J]. 热加工工艺,2017,46(15):260-261.

    NAN F Y ,GENG J C ,XUE F ,et al. Influence of tin-coat quality on babbit casting[J]. Hot Working Technology,2017,46(15):260-261.
    [8]
    张忠礼,段思华,张洪兵,等. 电弧喷涂锡基巴氏合金涂层的组织与性能[J]. 焊接学报,2010,31(4):17.

    ZHANG Z L ,DUAN S H ,ZHANG H B ,et al. Microstructure and properties of arc sprayed tin-based Babbitt coating[J]. Transactions of China Welding Institution,2010,31(4):17.
    [9]
    叶小芳. 离心浇注巴氏合金轴瓦粘结不牢的因素分析[J]. 铸造技术,2012,33(6):750-751.

    YE X F. Analysis on effect factors of low bond strength in centrifugal casting Babbitt alloy[J]. Foundry Technology,2012,33(6):750-751.
    [10]
    赵强,李向阳,曹佳丽,等. 抽水蓄能电站巴氏合金上导轴瓦损坏原因分析[J]. 人民长江,2017,48(20):107-110.

    ZHAO Q ,LI X Y ,CAO J L ,et al. Failure analysis of upper guide bush of Babbitt alloy for pumped storage station[J]. Yangtze River,2017,48(20):107-110.
    [11]
    裴自力. 行星轴巴氏合金失效分析[J]. 热加工工艺,2015,44(22):235-237.

    PEI Z L. Failure analysis on planet pinion shaft Babbitt metal[J]. Hot Working Technology,2015,44(22):235-237.
    [12]
    DONG Q ,YIN Z W ,LI H L ,et al. Effects of Ag micro-addition on structure and mechanical properties of Sn-11Sb-6Cu Babbitt[J]. Materials Science and Engineering:A,2018,722:225-230.
    [13]
    KAMAL M ,EL-BEDIWI A ,LASHIN A R ,et al. Copper effects in mechanical properties of rapidly solidified Sn–Pb–Sb Babbitt bearing alloys[J]. Materials Science and Engineering:A,2011,530:327-332.
    [14]
    郝云波,赵凯,杨萍,等. 激光熔覆锡基巴氏合金微观组织和力学性能[J]. 中国有色金属学报,2018,28(10):2016-2023.

    HAO Y B ,ZHAO K ,YANG P ,et al. Microstructure and mechanical properties of tin-based Babbitt alloy made by laser cladding deposition[J]. The Chinese Journal of Nonferrous Metals,2018,28(10):2016-2023.
    [15]
    张伟. 锡基巴氏合金减摩材料激光重熔组织与硬度的研究[J]. 热加工工艺,2015,44(8):32-34.

    ZHANG W. Research on microstructure and hardness of tin-base Babbitt alloy made by laser remelting[J]. Hot Working Technology,2015,44(8):32-34.
    [16]
    张胜全,张博,王一纯,等. 钎焊温度对锡基巴氏合金/钢基体过渡层组织的影响[J]. 特种铸造及有色合金,2016,36(7):694-697.

    ZHANG S Q ,ZHANG B ,WANG Y C ,et al. Effect of brazing temperature on the transition layer microstructure of the steel and Sn based babbit metal[J]. Special Casting and Nonferrous Alloys,2016,36(7):694-697.
    [17]
    宋振亚,彭孜,闫鸣,等. 制备方法对锡基巴氏合金轴瓦组织及性能的影响[J]. 稀有金属,2021,45(3):378-384.

    SONG Z Y ,PENG Z ,YAN M ,et al. Microstructures and mechanical properties of tin-based Babbitt bearings with different fabrication methods[J]. Chinese Journal of Rare Metals,2021,45(3):378-384.
    [18]
    王震,杜学铭,田金华,等. 铜基体表面巴氏合金堆焊层制备工艺与组织性能分析[J]. 焊接技术,2020,49(9):5-9,167.

    WANG Z ,DU X M ,TIAN J H ,et al. Analysis of preparation process and microstructure and performance of Babbitt alloy overlay on copper substrate[J]. Welding Technology,2020,49(9):5-9,167.
    [19]
    卢忠华. 船舶柴油机轴承巴氏合金堆焊技术的研究及应用[J]. 金属加工(热加工),2017(增刊1):40-43.

    LU Z H. Research and application of Babbitt surfacing technology for marine diesel engine bearings[J]. MW Metal Forming,2017(S1):40-43.
    [20]
    张小龙,张国富,戴登峰,等. 滑动轴承增材制造用巴氏合金成分与线材制备技术综述及市场潜力分析[J]. 世界有色金属,2023(6):40-44.

    ZHANG X L ,ZHANG G F ,DAI D F ,et al. The overview and market potential analysis of the Babbitt alloy composition and wire preparation technology for sliding bearing with additive manufacturing[J]. World Nonferrous Metals,2023(6):40-44.
    [21]
    王昌皓,李必文,邓彬,等. Q235B薄板网格表面巴氏合金MIG堆焊层制备与组织性能分析[J]. 锻压装备与制造技术,2022,57(1):79-83.

    WANG C H ,LI B W ,DENG B ,et al. Application of precision cold roll forming technology in sheet metal automatic production[J]. China Metalforming Equipment and Manufacturing Technology,2022,57(1):79-83.
    [22]
    阙铭鑫,柏兴旺,周祥曼,等. 表面毛化对巴氏合金MIG堆焊层界面组织及结合强度的影响[J]. 表面技术,2021,50(10):239-245.

    QUE M X ,BAI X W ,ZHOU X M ,et al. Effect of surface texturing on the interfacial microstructure and bonding strength of Babbitt alloy cladding by MIG welding[J]. Surface Technology,2021,50(10):239-245.
    [23]
    巩连河,赵子龙,叶春明,等. 电站用球型轴承巴氏合金层的焊接修复[J]. 山东电力技术,2008,35(1):38-39.

    GONG L H ,ZHAO Z L ,YE C M ,et al. Repairing of Babbitt alloy layer of spherical bearing used in power station[J]. Shandong Electric Power,2008,35(1):38-39.
    [24]
    安建勇,黄玉琴. 基于巴氏合金CMT技术的工艺性研究[J]. 上海大中型电机,2022(1):26-30.

    AN J Y ,HUANG Y Q. Research on technology based on Babbitt alloy CMT technology[J]. Shanghai Medium and Large Electrical Machines,2022(1):26-30.

Catalog

    Article views (14) PDF downloads (7) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return