Fatigue Test Methods and Their Data Processing Methods of Metallic Materials

BAI Xin; XIE Li-yang; REN Jun-gang; HU Jie-xin; LI Qiang

doi:10.11973/lhjy-wl201506001

PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING > 2015 > 51(6): 375-380. > DOI: 10.11973/lhjy-wl201506001

BAI Xin, XIE Li-yang, REN Jun-gang, HU Jie-xin, LI Qiang. Fatigue Test Methods and Their Data Processing Methods of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(6): 375-380. DOI: 10.11973/lhjy-wl201506001

Citation:

PDF (1401 KB)

Fatigue Test Methods and Their Data Processing Methods of Metallic Materials

BAI Xin^1,2,
XIE Li-yang^1,2,
REN Jun-gang^1,2,
HU Jie-xin^1,2,
LI Qiang^1,2

More Information

Received Date: April 27, 2015

Graphical Abstract

Abstract

Abstract

Fatigue is one of common failure forms of metallic material mechanical components,so the fatigue test methods and their data processing methods have been the hotpots of researchers.From fatigue life and fatigue strength under an specified life two aspects,the main research results of fatigue test methods and their data processing methods were introduced.In addition,numerous typical fatigue life test methods and their related statistical methods for obtaining the distributed parameters of the fatigue life were also stated.Besides,several typical test methods of fatigue strength under an expected life and their relevant statistical methods for evaluating the distributed parameters of the fatigue strength were explained.And through numerous examples,differences between different methods were contrasted.
- fatigue,
- fatigue test,
- fatigue life,
- fatigue strength under expected life,
- probability distribution

FullText(HTML)

References (27)

References

[1]	GJB/Z 18-1991金属材料力学性能数据表达准则[S].
[2]	BORREGO L P,FERREIRA J M,PINHO DA CRUZ J M,et al.Evaluation of overload effects on fatigue crack growth and closure[J].Engineering Fracture Mechanics,2003,70:1379-1397.
[3]	白鑫,谢里阳.平稳随机载荷历程下的疲劳裂纹扩展规律预测[J].航空学报,2014,35(9):2500-2505.
[4]	ISO 12107-2003Metallic materials fatigue testing statistical planning and analysis of data[S].
[5]	HEFFERN T V.Probabilistic modeling and simulation of metal fatigue life prediction[D].California:Naval Postgraduate School,2002.
[6]	高镇同.航空金属材料疲劳性能手册[M].北京:北京航空材料研究所,1981:97-224.
[7]	李航,张涛,李宇.TC11 钛合金高周疲劳性能的定量表征[J].理化检验-物理分册,2014,50(8):566-569,573.
[8]	徐灏.概率疲劳[M].沈阳:东北大学出版社,1994.
[9]	姚卫星.结构疲劳寿命分析[M].北京:国防工业出版社,2003.
[10]	傅惠民,刘成瑞.S-N 曲线和p-S-N曲线小子样测试方法[J].机械强度,2006,28(4):552-555.
[11]	吕箴,姚卫星.小样本疲劳寿命分析问题研究进展[J].力学与实践,2008,30(5):9-14.
[12]	刘建中,谢里阳,徐灏.疲劳寿命概率分布的模糊贝叶斯确定方法[J].航空学报,1994,15(5):607-610.
[13]	赵永翔,高庆.估计三种常用疲劳应力-寿命模型P-S-N曲线的统一经典极大似然法[J].应用力学学报,2001,18(1):84-89.
[14]	李洪双,吕震宙.P-S-N 曲线的Bootstrap 置信带[J].机械强度,2007,29(4):642-646.
[15]	周源泉,翁朝曦,刘正贤.对数正态分布均值的Bayes及Fiducial 精确限[J].系统工程与电子技术,1994(4):67-63.
[16]	GUIDA M,PENTA F.A Bayesian analysis of fatigue data[J].Structural Safety,2010,32:64-76.
[17]	BUCAR T,NAGODE M,FAJDIGA N M.A neural network approach to describing the scatter of S-N curves[J].International Journal of Fatigue,2005,28:311-323.
[18]	SHIMIZU S,TOSHA K,TSUCHIYA K.New data analysis of probabilistic stress-life (P-S-N) curve and its application for structural materials[J].International Journal of Fatigue,2010,32:565-575.
[19]	谢里阳,刘建中.样本信息聚集原理与PSN曲线拟合方法[J].机械工程学报,2013,49(15):96-104.
[20]	XIE L Y,LIU J Z,WU N X,et al.Backwards statistical inference method for P-S-N curve fitting with small-sample experiment data[J].International Journal of Fatigue,2014,63:62-67.
[21]	BS 3518-5-1966Methods of fatigue testing,Part 5-Guide to the application of statistics[S].
[22]	PROT E M.Fatigue testing under progressive loading: A new technique for testing materials[J].WADC TR52-148,1952.
[23]	DIXON W J,MOOD A M.A method for obtaining and analyzing sensitivity data[J].Journal of the Aerican Statistical Association,1948,43:109-26.
[24]	ZHANG J,KECECIOGLU D B.New approaches to determine the endurance strength distribution[C]//The 4th ISSAT International Conference on Reliability and Quality in Design.Seattle,Washington:[s.n.],1998:297-301.
[25]	LA ROSA G,RISITANO A.Thermographic metho-dology for rapid determination of the fatigue limit of materials and mechanical components[J].International Journal of Fatigue,2000,22(1):65-73.
[26]	WIRSCHING P H.Statistical summaries of fatigue data for design purposes［R］//NASA Contractor Report 3697.1983:N83-29731.
[27]	ZHAO Y X,YANG B.Probabilistic measurements of the fatigue limit data from a small sampling up-and-down method[J].International Journal of Fatigue,2008,30:2094-2103.

Cited By

Get Citation

PDF

XML

Article views (7) PDF downloads (3)

Turn off MathJax

Article Contents

Abstract

References

Fatigue Test Methods and Their Data Processing Methods of Metallic Materials

Abstract

References

Catalog

Export File

Citation

Format

Content