Test error of texture of 3104 aluminum alloy by X-ray diffraction

DONG Xueguang; ZOU Liying; WANG Meimei; GU Ningjie; HE Minglan

doi:10.11973/lhjy-wl202204006

PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING > 2022 > 58(4): 19-22. > DOI: 10.11973/lhjy-wl202204006

DONG Xueguang, ZOU Liying, WANG Meimei, GU Ningjie, HE Minglan. Test error of texture of 3104 aluminum alloy by X-ray diffraction[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2022, 58(4): 19-22. DOI: 10.11973/lhjy-wl202204006

Citation:

PDF (1553 KB)

Test error of texture of 3104 aluminum alloy by X-ray diffraction

China Aluminium Material Application Research Institute Co., Ltd., Beijing 100028, China

More Information

Received Date: August 05, 2021

Graphical Abstract

Abstract

Abstract

The texture of 3104 aluminum alloy samples with three different heat treatment states was tested by X-ray diffraction method, and the volume fraction test error of the texture was analyzed. The results show that when the inclination angle of X-ray diffraction test sample was 50°, the volume fraction error of texture calculated by ADC method basically tended to be stable. Reasonable selection of inclination angle of X-ray diffraction test sample could save test time and ensure volumn fraction measurement error within acceptable range.
- X-ray diffraction,
- texture testing,
- aluminum alloy,
- inclination angle

FullText(HTML)

References (14)

References

[1]	杨中玉, 张津,郭学博,等. 铝合金的织构及测试分析研究进展[J]. 精密成形工程,2013,5(6):1-6,47.
[2]	熊彪. 3003铝合金材料制耳率的控制[J]. 铝加工,2020(1):34-37.
[3]	ENGLER O. Texture and anisotropy in the Al-Mg alloy AA 5005 - Part I:texture evolution during rolling and recrystallization[J]. Materials Science and Engineering:A,2014,618:654-662.
[4]	HUTCHINSON W B,OSCARSSON A,KARLSSON. Control of microstructure and earing behaviour in aluminium alloy AA 3004 hot bands[J]. Materials Science and Technology,1989,5(11):1118-1127.
[5]	黄丽颖. 稀土电解电容器高压阳极用铝箔组织和织构研究[D]. 包头:内蒙古科技大学,2007.
[6]	马礼敦.X射线衍射在材料结构表征中的应用[J].理化检验(物理分册),2009,45(8):501-510.
[7]	ROE R J. Description of crystallite orientation in polycrystalline materials. III. general solution to pole figure inversion[J]. Journal of Applied Physics,1965,36(6):2024-2031.
[8]	张克龙,张继祥,刘运腾,等. 6016铝合金冷轧显微组织和织构的演变[J]. 稀有金属材料与工程,2017,46(6):1559-1565.
[9]	夏柳,徐春,白清领,等. 退火后终轧压下量对铝合金轧板织构和深冲性能的影响[J]. 上海金属,2019,41(2):29-34.
[10]	毛卫民. 金属材料的晶体学织构与各向异性[M]. 北京:科学出版社,2002.
[11]	汪波,易丹青,陈宇强,等. 2E12铝合金在冷轧和退火过程中织构和显微组织的演变[J]. 中国有色金属学报,2013,23(11):3064-3074.
[12]	沈健,张新明. 中间退火对3004合金组织、织构和各向异性的影响[J]. 铝加工,1994(3):44-47,63.
[13]	陈志永,才鸿年,常亚喆,等. 多晶铝轧制变形的织构演变 Ⅰ. 实验研究[J]. 金属学报,2008,44(11):1316-1321.
[14]	毛卫民,张新明. 晶体材料织构定量分析[M]. 北京:冶金工业出版社,1993.

Cited By

Get Citation

PDF

XML

Article views (5) PDF downloads (2)

Turn off MathJax

Article Contents

Abstract

References

Test error of texture of 3104 aluminum alloy by X-ray diffraction

Abstract

References

Catalog

Export File

Citation

Format

Content