Citation: | SUN Chaoming, SUN Zhongcheng, ZENG Xiangzhao. Analysis and Discussion on Normalized Signal-to-Noise Ratio in Digital Radiography[J]. Nondestructive Testing, 2017, 39(10): 42-48. DOI: 10.11973/wsjc201710010 |
[1] |
BERTHEL A, BONIN T, CADIHON S, et al.Digital radiography: description and user's guide[C]//Proceedings of international symposium on digital industrial radiology and computed tomography.Lyon:[s.n], 2007.
|
[2] |
ASTM E 2736 Standard guide for digital detector array radiology[S].
|
[3] |
LANCA L, SILVA A. Digital radiography detectors-a technicaloverview: part 1[J]. Radiography, 2009 (15): 58-62.
|
[4] |
EWERT U, ZSCHERPEL U, BAVENDIEK K. Strategies for film replacement in radiography-a comparative study[C]//Proceedings of IV conferencia panamericana de END.Buenos Aires:[s.n],2007.
|
[5] |
EWERT U, ZSCHERPEL U, HEYNE K,et al. Image quality in digital industrial radiology[J]. Materials Evaluation, 2012,70(8): 955-964.
|
[6] |
EWER U, BAVENDIEK K, ROBBINS J, et al. New compensation principles for enhanced image quality in industrial radiology with digital detector arrays[J]. Materials Evaluation, 2010,68(2): 163-168.
|
[7] |
郑世才.数字射线检测技术(五)——补偿规则说明[J].无损检测,2014,36(11):71-74.
|
[8] |
孙忠诚,曾祥照,梁蕾. 国内外射线透视检测标准的技术研究[J]. 无损检测,2009,31(10):819-826.
|
[9] |
ASTM E 2597 Standard practice for manufacturing characterization of digital detector arrays[S].
|
[10] |
ISO 17636-2 Non-destructive testing of welds-radiographic testing-part 2:X-and gamma-ray techniques with digital detectors[S].
|
[11] |
ASTM E 2698 Standard practice for radiological examination using digital detector arrays[S].
|
[12] |
YAFFE M J, ROWLANDS J A. X-ray detectors for digital radiography[J].Physics in Medicine and Biology,1997, 42:1-39.
|
[13] |
HJELM M, NORLIN B, NILSSON H E, et al. Monte Carlo simulation of the imaging properties of scintillator-coated X-ray pixel detectors[J]. Nuclear Instruments and Methods in Physics Research A,2003,509:76-85.
|
[14] |
EWERT U, ZSCHERPEL U, BAVENDIEK K. Possibilities and limits of digital industrial radiology: the new high contrast sensitivity technique-examples and system theoretical analysis[C]//Proceedings of international symposium on digital industrial radiology and computed tomography.Lyon:[s.n], 2007.
|
[15] |
张红凯,冯召东,李晓辉,等. 高分辨率X射线探测器读出电子学系统的研制及性能测试[J]. 原子能科学技术,2015,49(3):534-539.
|
[16] |
SEO C W, CHA B K, JEONET S, et al. Characterization of indirect X-ray imaging detector based on nanocrystallinegadolinium oxide scintillators for high-resolution imaging application[J]. Nuclear Instruments and Methods in Physics Research A,2013,699: 129-133.
|
[17] |
郑世才.数字射线检测技术(四)——等价技术级别评定[J]. 无损检测,2014,36(10):1-4.
|
[18] |
LANCA L, SILVA A. Digital radiography detectors-a technical overview: part 2[J]. Radiography 2009,15: 134-138.
|
[19] |
袁柏琴.实用胶片特性曲线的测绘[J]. 无损检测, 2004,26(4):196-198.
|
[20] |
GB/T 30913 工业射线胶片系统分类标准试验方法[S].
|
[21] |
ASTM E 2002 Standard practice for determining total image unsharpness and basic spatial resolution in radiography and radioscopy[S].
|
[22] |
中国机械工业学会无损检测分会. 射线检测[M].北京:机械工业出版社,1997.
|
[23] |
ROSE A. Vision: human and electronic[M]. New York: Plenum Press, 1973.
|