• 中文核心期刊
  • 中国科技论文统计源期刊
  • 中国科技核心期刊
  • 中国机械工程学会无损检测分会会刊
Advanced Search
LIU Heng, CHEN Bing, QIU Feifei, ZHU Zhongyin, GOU Guoqing. Finite element analysis and experiment of electromagnetic ultrasonic bolt axial stress measurement[J]. Nondestructive Testing, 2021, 43(12): 12-16. DOI: 10.11973/wsjc202112003
Citation: LIU Heng, CHEN Bing, QIU Feifei, ZHU Zhongyin, GOU Guoqing. Finite element analysis and experiment of electromagnetic ultrasonic bolt axial stress measurement[J]. Nondestructive Testing, 2021, 43(12): 12-16. DOI: 10.11973/wsjc202112003

Finite element analysis and experiment of electromagnetic ultrasonic bolt axial stress measurement

More Information
  • Received Date: September 09, 2021
  • At present, electromagnetic ultrasound has been widely studied in the fields of thickness measurement and nondestructive testing, but there is little research on bolt axial force measurement. In order to promote the application of electromagnetic ultrasound in bolt axial force measurement, in this paper, the process of electromagnetic ultrasonic excitation and propagation is simulated by establishing multi-physical field finite element method. Create a two dimensional bolt model, the signal of longitudinal wave propagation inside the bolt is obtained by electromagnetic ultrasound, and the stress distribution inside the bolt under axial load is obtained by finite element simulation. The finite element calculation shows that there is a certain linear relationship between axial load and acoustic time difference, and the linear relationship is affected by axial load. Different clamping length will affect the stress coefficient of the material, and the product of the tightening length and the stress coefficient is a fixed value.The test results show that both the finite element simulation results and the real test conditions show that under the action of axial stress, the ultrasonic propagation time increases, and a good linear relationship is presented with the axial stress.
  • [1]
    李望,吴长青,赵炜炜,等.电磁超声检测技术的应用[J].电子测试,2021(3):115-116,126.
    [2]
    徐煦源,涂君,张旭,等.用于钢板厚度测量的常用电磁超声线圈特性研究[J].中国测试,2020,46(4):143-147.
    [3]
    肖嘉伟.基于超声波技术的螺栓应力检测应用研究[D].宜昌:三峡大学,2020.
    [4]
    LUDWIG R,YOU Z,PALANISAMY R.Numerical simulations of an electromagnetic acoustic transducer-receiver system for NDT applications[J].IEEE Transactions on Magnetics,1993,29(3):2081-2089.
    [5]
    阳能军,封礼发,唐旭明,等.电磁超声横波换能器中线圈的优化设计[J].应用声学,2019,38(3):428-433.
    [6]
    唐旭明,阳能军,李平.电磁超声横波换能器中永磁体的建模与优化[J].无损探伤,2017,41(6):17-22.
    [7]
    贾雪,王雪梅,甘文成,等.声弹性效应螺栓轴向应力标定试验研究[J].中国测试,2018,44(3):23-27.
  • Cited by

    Periodical cited type(1)

    1. 王垒超,陈晶,刘恒,王任,孙海星,王彬彬. X80管线钢电磁超声残余应力检测精度的影响因素. 无损检测. 2023(06): 7-11+70 . 本站查看

    Other cited types(4)

Catalog

    Article views (6) PDF downloads (9) Cited by(5)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return