Advanced Search
    GUO Ming-en, SUN Zu-li, LI Jun, LUAN Gui-qing, CHEN Xin. Effect of Vacuum Assisted Resin Transfer Molding Process on Fiber Content and Mechanical Properties of EKB110/430LV Composite[J]. Materials and Mechanical Engineering, 2012, 36(5): 38-41.
    Citation: GUO Ming-en, SUN Zu-li, LI Jun, LUAN Gui-qing, CHEN Xin. Effect of Vacuum Assisted Resin Transfer Molding Process on Fiber Content and Mechanical Properties of EKB110/430LV Composite[J]. Materials and Mechanical Engineering, 2012, 36(5): 38-41.
    shu

    Effect of Vacuum Assisted Resin Transfer Molding Process on Fiber Content and Mechanical Properties of EKB110/430LV Composite

    More Information
    • Received Date: January 05, 2012
      Graphical Abstract
      • Abstract
    • The EKB1100/430LV composite was prepared by vacuum assisted resin transfer molding process, and the effect of different process parameters on the glass fiber content and mechanical properties of the composite was studied. The results show that the fiber content increased with the increase of vacuum, and the fiber content closing to resin inlet was lower and that closing to vacuum vent was most high. The tensile and compressive strength of the composite increased with the increase of the vacuum. Compressing the performing body before mold filling could increase the fiber content, and overflowing some certain resin during mold filling could increase the bending strength and the interlaminar shear strength.
      • FullText(HTML)
      • References (9)
    • [1]
      赵渠森, 赵攀峰.真空辅助成型工艺(VARI) 研究[J]. 纤维复合材料, 2002(1): 42-46.
      [2]
      祝颖丹, 李新华, 王继辉, 等.高渗透介质型真空注射成型工艺的研究[J]. 复合材料学报, 2003, 20(4): 136-140.
      [3]
      高彦涛, 李炜, 罗永康. VARTM工艺中多层玻纤织物渗透规律研究与工艺优化[J]. 玻璃钢/复合材料, 2009(6): 54-57.
      [4]
      LI W, KREHL J, GILLESPIE J W, et al. Process and performance evaluation of the vacuum-assisted process[J].Journal of Composite Materials, 2004, 38: 1803-1814.
      [5]
      SEEMANN, WILLIAM H. Plastic transfer molding apparatus for the production of fiber reinforced plastic structures: U S, 5052906[P].1991-10-01.
      [6]
      GOODELL B, LOPEZ-ANIDO R, HERZOG B. Composites pressure resin infusion System (ComPRIS): U S, 7300894[P].2007-11-27.
      [7]
      MITSUHIRO Y, TORU S, FUMIHITO T, et al. Development of advanced vacuum-assisted resin transfer molding technology for use in an MRJ empennage box structure [J].Mitsubishi Heavy Industries Technical Review, 2008, 45(4): 1-4.
      [8]
      BENDER D, SCHUSTER J, HEIDER D. Flow rate control during vacuum-assisted resin transfer molding (VARTM) processing[J].Composites Science and Technology, 2006, 66: 2265-2271.
      [9]
      朱洪艳, 吴宝昌, 张东兴, 等. 孔隙对碳纤维/ 环氧复合材料层合板层间剪切疲劳性能的影响[J].复合材料学报, 2010, 27(6): 32-37.
      • Related Articles

    Catalog

      Get Citation
      PDF
      XML
      Article views (3) PDF downloads (0) Cited by()
      Turn off MathJax
      Article Contents
      Abstract
      References

      Materials and Mechanical Engineering

      Address：99 Handan Road, ShanghaiPost Code: 200437

      Tel：021-65556775-368Email:mem@mat-test.com

      沪ICP备17055736号-5

      Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return