Citation: | YU Jin-jin, LU Gui-min, SHANG Shu-zhen, YU Jian-guo. Corrision Behavior of 310S and AL-6XN Steels in Molten MgCl2[J]. Corrosion & Protection, 2011, 32(1): 12-16. |
[1] |
Rapp R A. Hot corrosion of materials: a fluxing mechanism[J]. Corrosion Science,2002,44(2):209-221.
|
[2] |
Uusitalo M A,Vuoristo P M J,Mantyla T A. High temperature corrosion of coatings and boiler steels below chlorine-containing salt deposits[J]. Corrosion Science,2004,46(9):1311-1331.
|
[3] |
Gonzalez J G,Haro S,Martinez-Villafane A,et al. Corrosion performance of heat resistant alloys in Na2SO4-V2O5 molten salts[J]. Materials Science & Engineering,2006(435/436):258-265.
|
[4] |
Zhu B,Lindbergh G. Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment[J]. Electrochimica Acta,2001, 46(17):2593-2604.
|
[5] |
曾潮流, 吴维弢. Ni-Ti合金在熔融(Li,K)2CO3中的腐蚀行为研究[J]. 金属学报, 2000,36(5):517-520.
|
[6] |
Cho S H,Hur J M,Seo C S,et al. Hot corrosion behavior of Ni-base alloys in a molten salt under an oxidizing atmosphere[J]. Journal of Alloys and Compounds,2009,468(1/2):263-269.
|
[7] |
Cho S H,Hur J M,Seo C S,et al. High temperature corrosion of superalloys in a molten salt under an oxidizing atmosphere[J]. Journal of Alloys and Compounds,2008,452(1):11-15.
|
[8] |
Frangini S,Loreti S. The role of temperature on the corrosion and passivation of type 310S steel in eutectic(Li+K) carbonate melt[J]. Journal of power sources,2006,160(2):800-804.
|
[9] |
马海涛, 王来. 310SS在KCl盐膜下高温空气中腐蚀机理[J]. 大连理工大学学报,2002,42(6):687-691.
|
[10] |
孟丽君,邢辉,庞淦文, 等. AL6XN超级奥氏体钢的高温蠕变及疲劳行为研究[J]. 原子能科学技术,2009,43(6):509-513.
|
[11] |
Huang Y L,Oguocha I N A,Yannacopoulos S. The corrosion wear behaviour of selected stainless steels in potash brine[J]. Wear,2005,258(9):1357-1363.
|
[12] |
Fritz J D,Gerlock R J. Chloride stress corrosion cracking resistance of 6% Mo stainless steel alloy (UNS N08367)[J]. Desalination,2001,135(1/3):93-97.
|
[13] |
Wu Y L,Huang X F,Yang M D,et al. Study on the mechanisms and kinetics of complex’s thermal decomposition getting anhydrous magnesium chloride[J]. Journal of Analytical and Applied Pyrolysis,2008,81(1):133-135.
|
[14] |
Kipouros G J,Sadoway D R. A thermochemical analysis of the production of anhydrous MgCl2[J]. Journal of Light Metals,2001,1(2):111-117.
|
[15] |
Fernandez J F,Cuevas F,Sanchez C. Surface activation and hydrogenation kinetics of Ti sponge[J]. International Journal of Hydrogen Energy,1996,21(9):765-768.
|
[16] |
梁成浩. 金属腐蚀学导论[M]. 北京:机械工业出版社, 1999.
|
[17] |
胡荣祖,史启祯. 热分析动力学[M]. 北京: 科学出版社,2001.
|
[18] |
陈艺锋,彭长宏,唐谟堂. 锌蒸气的氧化行为与氧化锌的结晶形貌[J]. 高等学校化学学报,2005,26(2):213-217.
|
[19] |
李远士,牛焱, 吴维弢. 金属材料的高温氯化腐蚀[J]. 腐蚀科学与防护技术,2000,12(1):41-44.
|