Advanced Search
    ZHANG En-yong, YU Can, XU Yi-fei, GUAN Kai-shu. Effects of Temper Embrittlement on Mechanical Properties of Hydrogenation Reactor Steel Weld Determined by Small Punch Test[J]. Materials and Mechanical Engineering, 2014, 38(11): 16-20.
    Citation: ZHANG En-yong, YU Can, XU Yi-fei, GUAN Kai-shu. Effects of Temper Embrittlement on Mechanical Properties of Hydrogenation Reactor Steel Weld Determined by Small Punch Test[J]. Materials and Mechanical Engineering, 2014, 38(11): 16-20.
    shu

    Effects of Temper Embrittlement on Mechanical Properties of Hydrogenation Reactor Steel Weld Determined by Small Punch Test

    More Information
    • Received Date: June 29, 2014
      Graphical Abstract
      • Abstract
    • The effects of temper embrittlement on mechanical properties of the 2.25Cr-1Mo steel weld in hydrogenation reactor in the temperature range from -196 ℃ to 22 ℃ were studied by small punch test (SPT). The ductile-brittle transition temperature was obtained and the fractures of SPT specimens were analyzed. The results indicate that the tensile strength of the weld increased with temperature decreasing. The yield strength and tensile strength of specimens after temper embrittlement were significantly greater compared with the specimens after de-brittleness, which showed temper hardening effect. The fracture energy of SPT specimens can be used to characterize the low ductile-brittle transition and temper embrittlement. The ductile-brittle transition temperature of material increased because of temper embrittlement.
      • FullText(HTML)
      • References (12)
    • [1]
      MANAHAN M, ARGON A, HARLING O. The development of a miniaturized disk bend test for the determination of post-irradiation mechanical properties［J］.Journal of Nuclear Materials,1981,104:1545-1550.
      [2]
      关凯书,王志文.材料微观缺陷对其小冲杆试验结果的影响［J］.机械工程材料,2011,35(4):25-27.
      [3]
      杨正,杨思晟,凌祥,等.小冲孔能量法评价Q345R的屈服强度［J］.塑性工程学报,2012,19(6):95-101.
      [4]
      关凯书,黄奕昶,李璞.小冲杆测试材料屈服载荷的有限元分析［J］.塑性工程学报,2007,14(6):152-156.
      [5]
      MAO X,TAKAHASH I. Development of a further mirriaturized specimen of 3mm diameter for tem disk(3mm) smallpunch test［J］.Journal of Nuclear Materials, 1987,150:42-52.
      [6]
      钟巍华,佟振峰,张长义,等.小冲杆测试辐照对反应器压力容器钢力学性能的影响［J］.金属学报,2011,47(9):1205-1209.
      [7]
      FINARELLI D, CARSUGHI F,JUNG P. The small ball punch test at FZJ［J］.Journal of Nuclear Materials,2008,337:65-71.
      [8]
      刘加高,饶谋生,左上军. 材料韧脆转变温度数据处理方法［J］.化学工程与装备,2010(4):90-91.
      [9]
      周玉昌,夏翔鸣. CrMo钢材料韧脆转变温度曲线的回归分析［J］.压力容器, 2003,20(6):13-18.
      [10]
      KIM M C,OH Y J,LEE B S.Evaluation of ductile-brittle transition temperature before and after neutron irradiation for RPV steels using small punch tests［J］.Nuclear Engineering and Design,2005,235:1799-1805.
      [11]
      SHEKHTER A, KIM S, CARR D G, et al. Assessment of mechanical properties of the martensitic steel EUROFER97 by means of punch tests［J］.International Journal of Pressure Vessels and Piping, 2002,79:611-615.
      [12]
      BULLOCH J H. Toughness losses in low alloy steels at high temperatures:an appraisal of certain factors concerning the small punch test［J］.International Journal Pressure Vessels and Piping,1998,75:791-804.欢迎来稿欢迎订阅欢迎刊登广告
      • Related Articles

    Catalog

      Get Citation
      PDF
      XML
      Article views (3) PDF downloads (2) Cited by()
      Turn off MathJax
      Article Contents
      Abstract
      References

      Materials and Mechanical Engineering

      Address：99 Handan Road, ShanghaiPost Code: 200437

      Tel：021-65556775-368Email:mem@mat-test.com

      沪ICP备17055736号-5

      Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return