Microstructure and Mechanical Properties of Pearlite Steel Wires with Different Strains

YANG Lin-jiang; XIAO Xuan; PENG Tao; YE Li-na; ZHOU Zheng

Materials and Mechanical Engineering > 2012 > 36(3): 26-30.

YANG Lin-jiang, XIAO Xuan, PENG Tao, YE Li-na, ZHOU Zheng. Microstructure and Mechanical Properties of Pearlite Steel Wires with Different Strains[J]. Materials and Mechanical Engineering, 2012, 36(3): 26-30.

Citation:

PDF (3079 KB)

Microstructure and Mechanical Properties of Pearlite Steel Wires with Different Strains

More Information

Received Date: September 30, 2011

Graphical Abstract

Abstract

Abstract

The microstructure and mechanical properties of SWRH72A and SWRH82B steel wires with different cold-drawing strains were studied by scanning electron microscopy and tensile test. The results show that the tensile strength of the steel wires increased with the increase of drawing strain within the low strain range, the tensile strength was linear with the ture strain. The relation between tensile strength and strain at big strains was different from that at low strains, the pearlite colony rotated under the condition of low strains, and finally the longitudinal axis of the colony was parallel to the axis of steel wires. During the drawing, 〈110〉texture which was parallel to the drawing direction was formed, and its intensity gradually increased with the increase of the strain.
- cold drawing,
- microstructure,
- mechanical property,
- pearlite steel wire

FullText(HTML)

References (26)

References

[1]	AZUSHIMA A, KOPP R, KORHONEN A, et al. Severe plastic deformation (SPD) processes for metals[J].Manufacturing Technology, 2008,57(2):716-735.
[2]	TARUI T, MARUYAMA N, EGUCHI T, et al. High strength galvanized steel wire for bridge cables[J]. Structural Engineering International :Journal of the International,2002,12(3):209-213.
[3]	GOTO S, KIRCHHEIM R, Al-KASSAB T, et al. Application of cold drawn lamellar microstructure for developing ultra-high strength wires[J].Tans Nonferrous Met Soc China,2007,17:1129-1138.
[4]	EMBURY J D, FISHER R M. Structure and properties of drawn pearlite[J].Acta Metall,1966,14(2):147-159.
[5]	DOLLAR M, BERNSTEIN I M, THOMPSON A W. Influence of deformation substructure on flow and fracture of fully pearlitic steel[J].Acta Metall,1988,36(2):311-320.
[6]	GIL SECVILLANO J. Substructure and strengthening of heavily deformed single and two-phase metallic materials [J].J Phys Ⅲ France,1991,1:967-978.
[7]	FURUKAWA M, HORITA Z, ZHILYAEV A P, et al. Developing ultra-fine-grained microstructures through the use of severe plastical deformation [J].Mater Sci Forum,2003,426/432:2631-2636.
[8]	DOBAKIN S V. On the increase of thermal stability of ultra fine grained material obtained by severe plastic deformation [J].Mater Sci Forum,2003,426/432:2699-2704.
[9]	HIDAKA H, TSUCHIYAMA T, TAKAKI S. Microstructural change during mechanical milling treatment in Fe-C alloy powders with different initial microstructure[J].Mater Sci Forum,2003,426/432:2717-2722.
[10]	WON J N, CHUL M B, SEI J O, et al. Effect of interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wire[J].Scripta Mater,2000,42:457-463.
[11]	TOMOTA Y, SUZUKI T, KANIE A, et al. In situ neutron diffraction of heavily drawn steel wires with ultra-high strength under tensile loading[J].Acta Materialia,2005,53:463-467.
[12]	WON J N,CHUL M B. Void initiation and microstructural changes during wire drawing of pearlitic steels[J].Mater Sci Eng, 1995,203:278-285.
[13]	ZELIN M. Microstructure evolution in pearlitic steels during wire drawing[J].Acta Materialia,2005,50(17):4431-4447.
[14]	张晓丹.钢帘线钢丝冷拉拔过程中组织演变的定量研究与力学性能[D].北京:清华大学,2009.
[15]	PORTER D A, EASTERLING K E, SMITH G D W. Dynamic studies of the tensile and fracture of pearlite[J].Acta Metall,1978,26(9):1405-1422.
[16]	READ H G, REYNOLDS W T, HONO K, et al. APFIM and TEM studies of drawn pearlitic wire[J].Scripta Mater,1997,37(8):1221-1230.
[17]	HONO K, OHNUMA M, MURAYAMA M, et al. Cementite decomposition in heavily drawn pearlite steel wire[J].Scripta Mater,2001,44:977-983.
[18]	GAVRILJUK V G. Decomposition of cementite in pearlitic steel due to plastic deformation[J].Mat Sci Eng A,2003,345:81-89.
[19]	LANGUILLAUME J, KAPELSKI G, BAUDELET B. Cementite dissolution in heavily cold drawn pearlitic steel wires [J].Acta Mater,1997,45:1201-1212.
[20]	HEIZMANN J J, TIDU A, BOLLE B, et al. Influence of the crystallographic texture on the torsional behavior of steel cord[J].Wire Journal Internationa,1999,32(7):150-158.
[21]	PUTTICK K E. Deformation and fracture of pearlite[J].Iron Steel Inst,1957,185:161-176.
[22]	GIL SEVILLANO J, VAN HOUTTE P, AERNOUDT E. Large strain work hardening and textures[J].Progr Mater Sci,1980,25:69-134.
[23]	LIU Y D, JIANG Q W, ZHAO X. Texture analysis and simulation of pearltic wire during drawing[J].Acta Metall Sin,2002,38:1215-1218.
[24]	LIU Y D, JIANG Q W, WANG G, et al. Influence of microstructures and textures on torsional behavior of pearlitic wires[J].Journal of Materials Science & Technology,2005,21(3):357-360.
[25]	LI Y P, TAN J, ZHANG G P. Interface instability within shear bands in nanoscale Au/Cu multilayers[J].Scripta Materialia, 2008, 59:1226-1229.
[26]	LI Y P, ZHANG G P, WANG W, et al. On interface strengthening ability in metallic multilayers[J].Scripta Materialia,2007,57:117-120.

Cited By

Get Citation

PDF

XML

Article views (7) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Microstructure and Mechanical Properties of Pearlite Steel Wires with Different Strains

Abstract

References

Catalog

Export File

Citation

Format

Content