Advanced Search
    TU Yi-you, JIANG Jian-qing, CAI Lei. Microstructure and magnetics property of Cold-drawing Steel Wire Under Large Strain[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2009, 45(2): 71-73.
    Citation: TU Yi-you, JIANG Jian-qing, CAI Lei. Microstructure and magnetics property of Cold-drawing Steel Wire Under Large Strain[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2009, 45(2): 71-73.

    Microstructure and magnetics property of Cold-drawing Steel Wire Under Large Strain

    More Information
    • Received Date: April 09, 2008
    • The microstructure of SWRH72A steel wire under cold-drawn deformation were studied with SEM. The changes in magnetic properties of steel wire with increasing drawing strain were investigated using VSM. The results showed that originally straight pearlite plates become wavy after drawing at cross-section.Highly elongated pearlite colonies develops as a result of their stretching and rotation towards the wire axis. The coercivity and residual magnetization of steel wire increase with increasing drawing strain. The saturation magnetization of steel wire was almost unchanged,2.885 69×104 A·m-1. And it increased to 2.956 33×104 A·m-1 with the strain extending to 2.60.Cementite content of SWRH72A steel wire by calcutation was lowered from 10.8% in undeform to 8.6%.
    • [1]
      Languillaume J,Kapelski G,Baudelet B. Cementite dissolution in heavily cold drawn pearlitic steel wires[J]. Acta Mater,1997,45(3):1201-1212.
      [2]
      Hono K,Ohnuma M,Murayama M,et al. Cementite decomposition in heavily drawn pearlite steel wire[J]. Scripta Mater,2001,44(6):977-983.
      [3]
      Wong Jong Nam,Chul Min Bae,Sei J Oh,et al. Effect of Interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wires[J]. Scripta Mater,2000,42(5):457-463.
      [4]
      Gavriljuk V G. Comment on “effect of interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wires”[J]. Scripta Mater,2001,45(12):1469-1472.
      [5]
      Danoix F,sauvage Z,Julien D,et al. Direct evidence of cementite dissolution in drawn pearlitic steels observed by tomographic atom probe [J]. Mater Sic Eng A,1998,250: 8-13.
      [6]
      XuY,Umemoto M,Tsuchiya K. Comparison of the characteristics of nanocrystalline ferrite in Fe-0.89C steels with pearlite and spheroidite structure produce by ball milling[J]. Mater Trans,2002,43 (9) : 2205-2212.
      [7]
      Gavriljuk V G. Decomposition of cementite in pearlitic steel due to plastic deformation[J]. Materials Science and Engineering,2003,A345:81-89.
      [8]
      王 润. 金属材料物理性能[M]. 北京:冶金工业出版社,1993.
    • Related Articles

      [1]FANG Jian, LI Hetian, ZHANG Jianwei. Standardization of instantaneous tensile strain hardening properties of metallic materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2024, 60(10): 5-8. DOI: 10.11973/lhjy-wl240055
      [2]ZHANG Youwei. Effects of Strain Rate Control on Static Tensile Properties of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2019, 55(8): 555-560,587. DOI: 10.11973/lhjy-wl201908010
      [3]ZHANG Feng-lin. Magnetic Portable Hardness Testers[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2016, 52(10): 705-712. DOI: 10.11973/lhjy-wl201610007
      [4]XIANG Qian, FANG Ze-min, HUANG Shuang. Impact of Shearing Stress on Magnetic Properties of Different Size Motor Iron Cores[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(10): 693-697. DOI: 10.11973/lhjy-wl201510004
      [5]CHENG Ling-li, ZHANG Ming, HU Yu-mei, SHEN An-guo, GAO Xu-shan, TAN Fu-ming. Uncertainty Evaluation on Measurement for Deflected Angle of Magnetization of Permanent Magnetic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2012, 48(9): 598-600.
      [6]WANG Shu-yun, HE Jian-fang, WANG Cun-tao. Anisotropic Magnetoresistance and Magnetic Property of Ni81M/sub>Fe19 Ultra-thin Films[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2012, 48(9): 572-575.
      [7]GUO Yan-jun, QIAO Li-jie, CAO Yan-ming. Microstructure and Mechanical Properties of Large-diameter and Large-deformation Middle-frequency Induction Pipe Bend of 16Mo3 Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2012, 48(9): 565-568.
      [8]ZHANG Xiao-ling, WANG Bing. Dynamic Vibration Fatigue Properties of High Damping Rubber[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2011, 47(12): 767-769.
      [9]GUO Liang, WU Jin-long. Effects of Specimen Orientation on Tensile Properties of Rolled Steel Plates[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2010, 46(4): 211-214.
      [10]FENG Ji-jun, GUO Wen-fang, ZENG Zhao-hong, LIU Shu-guo. Analysis of Nondestructive Detection Magnetic Trace Phenomenon and Influence on Fatigue Properties of 48MnV Micro-alloy Metal Automobile Engine Crank[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2010, 46(1): 40-44.

    Catalog

      Article views (5) PDF downloads (2) Cited by()

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return