Citation: | XU He-jun, LING Xiao, BA Fa-hai. Analysis on Ductile-brittle Transition Temperature of 34CrNiMo6 Steel Used for Wind Turbine Spindle[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(5): 307-311. |
[1] |
张波,范华,张邦强.34CiNiMo6材料低温韧性研究[J].东方电气评论,2013,27(105):38-43.
|
[2] |
焦何生.34CiNiMo6风电主轴的热处理工艺[J].铸造,2013,17:44-45.
|
[3] |
ASTM A370-2013aStandard Test Methods and Definitions for Mechanical Testing of Steel Products[S].
|
[4] |
GB/T 229-2007金属材料夏比摆锤冲击试验方法[S].
|
[5] |
王烽,廉晓洁.冲击韧脆转变曲线数学模型的选择[J].理化检验-物理分册,2009,45(10):617-620.
|
[6] |
周昌玉,夏翔鸣.CrMo钢材料韧脆转变温度曲线的回归分析[J].压力容器,2003,20(6):13-18.
|
[7] |
赵建平,张秀敏,沈士明.材料韧脆转变温度数据处理方法探讨[J].石油化工设备,2004,33(4):29-32.
|
[8] |
张锦,张瑞雪,马丽,等.影响B50A224钢韧脆转变温度的因素[J].理化检验-物理分册,2015,51(2):105-108.
|
[9] |
赵品.材料科学基础[M].哈尔滨:哈尔滨工业大学出版社,2007:120-143.
|
[10] |
BORDET S R, KARSTENSEN A D, KNOWLES D M, et al.A new statistical local criterion for cleavage fracture in steel.Part II: application to an offshore structural steel [J].Engineering Fracture Mechanics, 2005,72:453-474.
|
[1] | XU Hejun, MEI Tan. Instrumented impact test for ductile-brittle transition temperature evaluation of mixed fracture metal materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2023, 59(10): 13-18,39. DOI: 10.11973/lhjy-wl202310003 |
[2] | WANG Yong. Effect of Impact Notch Type on Ductile-Brittle Transition Temperature of 34CrNi1Mo Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(10): 37-39. DOI: 10.11973/lhjy-wl202110008 |
[3] | YANG Jingang. Effect of Different Fitting Functions on Evaluation Results of Ductile Brittle Transition Temperature of Gas Turbine Disk[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(7): 29-34. DOI: 10.11973/lhjy-wl202107007 |
[4] | XU Hejun. Some Key Problems in Testing of Ductile-Brittle Transition Temperature of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2017, 53(6): 422-427. DOI: 10.11973/lhjy-wl201706010 |
[5] | WU Kai-bin, YAO Yong. Measurement of Ductile-brittle Transition Temperature of 20 Steel Pipes up to Different Standards[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2016, 52(5): 300-302. DOI: 10.11973/lhjy-wl201605003 |
[6] | WU Bo, GAO Guang-yan, SUN Ming-ye, LI Xia-xi, WANG Xiu-yun. Ductile-brittle Transition Temperature Test of Helical Welding Pipes of a High Pressure Gas Station[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(2): 116-119. |
[7] | ZHANG Jin, ZHANG Rui-xue, MA Li, MA Wen-jin. Factors Affecting the Ductile-brittle Transition Temperature of B50A224 Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(2): 105-108. |
[8] | ZHANG Jin, ZHANG Rui-xue, MA Wen-jin, QIU Guo-min. Effects of δ-Fe on Ductile-brittle Transition Temperature of ZG06Cr13Ni4Mo Stainless Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2013, 49(3): 139-143. |
[9] | ZHENG Cheng-ping, ZHANG Rui-feng. Effect of Alloy Element Composition Fluctuation in the Steel on the Ductile-brittle Transition Temperature[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2010, 46(4): 223-225. |
[10] | YU Zhao-bin, ZHANG Zhuang. RESEARCH ON DUCTILE-BRITTLE TRANSITION TEMPERATURE OF 921A STEEL[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2006, 42(7): 332-334. |