Citation: | CHEN Xiong-wei, YIN Deng-feng, LIU Min, ZHU Hui-chao, DENG Chun-ming. Effects of Plasma Spraying Parameters on Wear Properties of Cr2O3 Coatings[J]. Materials and Mechanical Engineering, 2008, 32(7): 9-12. |
[1] |
Hélène Ageorges,Pavel Ctibor,Zouhair Medarhri,et al.Influence of the metallic matrix ratio on the wear resistance (dry and slurry abrasion) of plasma sprayed cermet (chromia/stainless steel) coatings[J].Surface and Coatings Technology,2006,201:2006-2011.
|
[2] |
Giovanni Bolelli,Valeria Cannillo,Luca Lusvarghi,et al.Wear behaviour of thermally sprayed ceramic oxide coatings[J].Wear,2006,261:1298-1315.
|
[3] |
孙永兴,王引真,何艳玲.Cr2O3梯度涂层的组织与耐磨性研究[J].材料导报,2000,14(7):64-65.
|
[4] |
李剑锋,黄静琪,季珩,等.等离子喷涂Cr2O3涂层显微硬度的工艺优化[J].硅酸盐学报,2001,29(1):49-53.
|
[5] |
Celik E,Tekmen C,Ozdemir I,et al.Effects on performance of Cr2O3 layers produced on Mo/cast-iron materials[J].Surface and Coatings Technology,2003,174:1074-1081.
|
[6] |
Mann B S,Prakash Braham.High temperature friction and wear characteristics of various coating materials for steam valve spindle application[J].Wear,2000,240:223-230.
|
[7] |
Toma D,Brandl W,Marginean G.Wear and corrosion behaviou of thermally sprayed cermet coatings[J].Surface and Coatings Technology,2001,138:149-158.
|
[8] |
Fernández J E,Wang Yinglong,Tucho R,et al.Friction and wear behaviour of plasma-sprayed Cr2O3 coatings against steel in a wide range of sliding velocities and normal loads[J].Tribology International,1996,29(4):333-343.
|
[9] |
王引真,孙永兴,何艳玲.Cr2O3涂层性能与等离子喷涂工艺稳定性的关系[J].材料保护,2000,33(7):41-43.
|
[10] |
Ahn Hyo-Sok,Kwon Oh-Kwan.Tribological behaviour of plasma-sprayed chrominu oxide coating[J].Wear,1999,225:814-824.
|
[11] |
孙永兴,王引真,何艳玲.等离子喷涂工艺稳定性对Cr2O3涂层结合强度的影响[J].兵器材料科学与工程,2001,24(3):38-40.
|
[12] |
税毅,张鹏程,白彬,等.1Cr17Ni4不锈钢金属和陶瓷等离子体喷涂工艺研究[J].表面技术,2005,34(5):53-55.
|