| [1] |
冯金良.常用电力铁塔螺栓加工工艺及残余应力浅析［J］.机械工业标准化与质量,2012(2): 28-31.
|
| [2] |
RUIZ-HERVIAS J, LUZIN V, PRASK H, et al. Effect of thermo-mechanical treatments on residual stresses measured by neutron diffraction in cold-drawn steel rods［J］.Materials Science and Engineering A,2006,435/436: 725-735.
|
| [3] |
DENG D, MURAKAWA H. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements［J］.Computational Materials Science,2006,37(3): 269-277.
|
| [4] |
陆业航,张杰,吴冰,等.铸造TC4钛合金电子束焊残余应力测试［J］.理化检验-物理分册,2013,49(11): 711-713.
|
| [5] |
周磊,赵秀娟,陈春焕,等.热处理工艺对GCr15钢轴承外环淬火组织和性能的影响［J］.理化检验-物理分册,2013,49(10): 650-653.
|
| [6] |
GB/T 3098.1-2010 紧固件机械性能 螺栓、 螺钉和螺柱［S］.
|
| [7] |
ASTM A394-2008 钢制镀锌输变电铁塔螺栓和螺母规格［S］.
|
| [8] |
DIN 7990-2008 钢结构用带六角螺母的六角头螺栓［S］.
|
| [9] |
DL/T 284-2012 输电线路杆塔及电力金具用热浸镀锌螺栓与螺母［S］.
|
| [10] |
SATO S, WAGATSUMA K, SUZUIKI S, et al. Relationship between dislocations and residual stresses in cold-drawn pearlitic steel analyzed by energy-dispersive X-ray diffraction［J］.Materials Characterization,2013,83: 152-160.
|
| [11] |
GB/T 7704-2008 无损检测X射线应力测定方法［S］.
|
| [12] |
李益华,吴运新,龚海,等.应用X射线衍射法测定轴类工件中的残余应力［J］.机械工程材料,2012,36(7): 96-99.
|
| [13] |
夏之秋,顾伟生,朱世根.TP304不锈钢薄壁管的表面残余应力［J］.理化检验-物理分册,2010,46(6): 356-359.
|
| [14] |
徐萍,王伯健.钢丝拉拔过程中的残余应力［J］.金属制品,2008,34(3): 1-4.
|
| [15] |
杨帆.残余应力对连续拉拔珠光体钢丝力学性能的影响［J］.材料导报,2010(5): 105-109.
|
| [16] |
张尧武,曾卫东,史春玲,等.真空去应力退火对TC18钛合金残余应力及组织性能的影响［J］.中国有色金属学报,2011(11): 2780-2785.
|
| [17] |
周伟,周廉,于振涛.TA2环形管表面残余应力及消除［J］.稀有金属材料与工程,2005(6): 1002-1004.
|
下载:
