高级检索

    聚合物基复合材料的力学性能测试方法

    潘星

    潘星. 聚合物基复合材料的力学性能测试方法[J]. 理化检验-物理分册, 2023, 59(9): 69-74. DOI: 10.11973/lhjy-wl202309019
    引用本文: 潘星. 聚合物基复合材料的力学性能测试方法[J]. 理化检验-物理分册, 2023, 59(9): 69-74. DOI: 10.11973/lhjy-wl202309019
    PAN Xing. Test methods of mechanical properties of polymer matrix composites[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2023, 59(9): 69-74. DOI: 10.11973/lhjy-wl202309019
    Citation: PAN Xing. Test methods of mechanical properties of polymer matrix composites[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2023, 59(9): 69-74. DOI: 10.11973/lhjy-wl202309019

    聚合物基复合材料的力学性能测试方法

    详细信息
      作者简介:

      潘星(1985-),女,博士,主要从事复合材料测试以及开发等方面研究工作,panxing@scrim.com

    • 中图分类号: TB33; V258

    Test methods of mechanical properties of polymer matrix composites

    • 摘要: 随着聚合物基复合材料的广泛使用,其力学性能测试结果的准确性变得至关重要。对聚合物基复合材料的力学性能测试方法及其测试标准进行了论述,同时对聚合物基复合材料的界面力学性能表征方法及其研究进展进行了介绍。
      Abstract: With the widespread use of polymer matrix composites, the accuracy of their mechanical properties test results had become crucial. The test methods and test standards of mechanical properties of polymer matrix composites were discussed. At the same time, the characterization methods and research progress of interfacial mechanical properties of polymer matrix composites were introduced.
    • [1] 段文,孔祥鑫.碳纤维复合材料在汽车轻量化领域中的应用进展[J].汽车零部件,2023(4):84-87.
      [2] 牛一凡,高赛,王晓瑞.聚合物基复合材料拉伸性能试验方法国标和美标的对比分析[J].理化检验(物理分册),2017,53(8):548-552.
      [3] 韩天福.纤维增强复合材料层间剪切强度测定方法的改进研究[D].大连:大连海事大学,2022.
      [4] 邹建超.纤维复合材料冲击后压缩/剪切的损伤机理及性能预测研究[D].大连:大连理工大学,2021.
      [5] 郭壮壮.复合材料Ⅰ型与Ⅰ/Ⅱ混合型层间断裂韧性测试的新方法[D].上海:上海交通大学,2019.
      [6]

      TOMITA A,CHIAO R Y.Observation of berry’s topological phase by use of an optical fiber[J].Physical Review Letters,1986,57(8):937-940.

      [7]

      CHARAN V S,VARDHAN A V,RAJ S,et al.Experimental characterization of CFRP by NOL ring test[J].Materials Today:Proceedings,2019,18:2868-2874.

      [8]

      ZHENG N,HE J M,ZHAO D,et al.Improvement of atomic oxygen erosion resistance of carbon fiber and carbon fiber/epoxy composite interface with a silane coupling agent[J].Materials & Design,2016,109:171-178.

      [9]

      LIN G,GEUBELLE P H,SOTTOS N R.Simulation of fiber debonding with friction in a model composite pushout test[J].International Journal of Solids and Structures,2001,38(46/47):8547-8562.

      [10]

      KRISHNAN P.A novel microbond bundle pullout technique to evaluate the interfacial properties of fibre-reinforced plastic composites[J].Bulletin of Materials Science,2017,40(4):737-744.

      [11]

      ZHAO Z B,TENG K Y,LI N,et al.Mechanical,thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface[J].Composite Structures,2017,159:761-772.

      [12]

      MOLAZEMHOSSEINI A,TOURANI H,NAIMI-JAMAL M R,et al.Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica[J].Polymer Testing,2013,32(3):525-534.

      [13]

      GAIN A K,OROMIEHIE E,PRUSTY B G.Nanomechanical characterisation of CF-PEEK composites manufactured using automated fibre placement (AFP)[J].Composites Communications,2022,31:101109.

      [14]

      QI Y X,JIANG D Z,JU S,et al.Determining the interphase thickness and properties in carbon fiber reinforced fast and conventional curing epoxy matrix composites using peak force atomic force microscopy[J].Composites Science and Technology,2019,184:107877.

      [15]

      ZHENG N,HE J M,GAO J F,et al.Adhesion force measured by atomic force microscopy for direct carbon fiber-epoxy interfacial characterization[J].Materials & Design,2018,145:218-225.

      [16]

      TOTTEN K R,KUTUB B,CARLSSON L A.In situ determination of the fiber-matrix interface tensile strength[J].Journal of Composite Materials,2016,50(5):589-599.

      [17]

      LIU Y,HE D L,HAMON A L,et al.Comparison of different surface treatments of carbon fibers used as reinforcements in epoxy composites:Interfacial strength measurements by in situ scanning electron microscope tensile tests[J].Composites Science and Technology,2018,167:331-338.

      [18]

      GHAFFARI S,SEON G,MAKEEV A.In-situ SEM based method for assessing fiber-matrix interface shear strength in CFRPs[J].Materials & Design,2021,197:109242.

      [19]

      EGOSHI T,ISHIKAWA T,TEZURA M,et al.Transmission electron microscopy of unidirectional carbon fiber reinforced plastics at on-axis tension[J].Materialia,2020,14:100907.

      [20]

      ISHIKAWA T,TEZURA M,KIZUKA T.Direct observation of microstructural fracture dynamics in carbon fiber reinforced plastics via in situ transmission electron microscopy[J].Composites Science and Technology,2020,198:108264.

      [21]

      MONTES-MORÁN M A,YOUNG R J.Raman spectroscopy study of high-modulus carbon fibres:effect of plasma-treatment on the interfacial properties of single-fibre-Zepoxy composites[J].Carbon,2002,40(6):857-875.

      [22]

      YA M,PYRZ R.Reinforcement role of carbon nanotubes:interfacial properties of carbon fibre-epoxy nanocomposite[J].Polymers and Polymer Composites,2015,23(4):213-222.

    计量
    • 文章访问数:  9
    • HTML全文浏览量:  2
    • PDF下载量:  8
    • 被引次数: 0
    出版历程
    • 收稿日期:  2023-07-13
    • 刊出日期:  2023-09-07

    目录

      /

      返回文章
      返回