高级检索

    纳米晶(Mo1-xCrx)Si2涂层的组织和摩擦磨损性能

    陈家庆, 徐江

    陈家庆, 徐江. 纳米晶(Mo1-xCrx)Si2涂层的组织和摩擦磨损性能[J]. 机械工程材料, 2014, 38(7): 58-62.
    引用本文: 陈家庆, 徐江. 纳米晶(Mo1-xCrx)Si2涂层的组织和摩擦磨损性能[J]. 机械工程材料, 2014, 38(7): 58-62.
    CHEN Jia-qing, XU Jiang. Microstructure and Friction and Wear Properties of Nanocrystalline (Mo1-xCrx)Si2 Coatings[J]. Materials and Mechanical Engineering, 2014, 38(7): 58-62.
    Citation: CHEN Jia-qing, XU Jiang. Microstructure and Friction and Wear Properties of Nanocrystalline (Mo1-xCrx)Si2 Coatings[J]. Materials and Mechanical Engineering, 2014, 38(7): 58-62.

    纳米晶(Mo1-xCrx)Si2涂层的组织和摩擦磨损性能

    基金项目: 

    国家自然科学基金资助项目(51175245)

    江苏省自然科学基金资助项目(BK2010073)

    详细信息
      作者简介:

      陈家庆(1989-), 男, 江苏盐城人, 硕士研究生。

    • 中图分类号: TG73

    Microstructure and Friction and Wear Properties of Nanocrystalline (Mo1-xCrx)Si2 Coatings

    • 摘要: 采用双阴极等离子溅射技术在TC4合金表面成功制备了四种不同铬含量的纳米晶(Mo1-xCrx)Si2(x=0, 0.09, 0.18, 0.27)涂层, 研究了涂层的组织、与基体的结合力以及摩擦磨损性能。结果表明:(Mo1-xCrx)Si2涂层的组织均匀、致密, 与基体结合紧密; 随着铬含量增加, 纳米晶涂层的硬度、弹性模量均增加, 摩擦因数和磨损率均降低。
      Abstract: Four kinds of nanocrystalline (Mo1-xCrx)Si2(x=0, 0.09, 0.18, 0.27) coatings were prepared on TC4 alloy surface by a double cathode plasma sputtering technique, and the microstructure, binding force with the substrate and friction and wear properties of the coatings were investigated. The results show that the coatings exhibited homogeneous and dense microstructure and good binding force with the substrate. The harness and elastic modulus of the coatings were all increased with increasing Cr addition, but the friction coefficient and wear rate all reduced.
    • [1] BECKER N L, BERGER J, BOLM-AUDORFF U. Asbestos exposure and malignant lymphomas-a review of the epidemiological literature[J].Int Arch Occup Environ Health,2001,74:459-469.
      [2] PETROVIC J J. Mechanical behavior of MoSi2 and MoSi2 composites[J].Mater Sci Eng A,1995,192/193:31-37.
      [3] 张厚安, 第二相对MoSi2材料制备与性能的影响[D].长沙:中南大学,2002.
      [4] ZHANG H, LONG C, CHEN P. Synthesis and properties of MoSi2 alloyed with aluminum[J].Inter J Refra Metal & Hard Mater,2003,21:75-79.
      [5] 吕晋军,王静波,杨生荣, 等.MoSi2及其复合材料摩擦学性能研究[J].摩擦学学报,2003,23(5):361-366.
      [6] 唐思文,张厚安,刘心宇.MoSi2/45钢在干摩擦条件下的滑动摩擦磨损性能[J].润滑与密封,2007,32 (4):105-107.
      [7] 刘林林.微合金化和复合化对纳米晶Ti5Si3涂层性能影响的研究[D].南京: 南京航空航天大学, 2011.
      [8] 毛相震.Mo5Si3增强MoSi2基纳米/纳米梯度复合涂层性能的研究[D].南京: 南京航空航天大学, 2012.
      [9] JNSSON B, HOGMARK S. Hardness measurements of thin films[J].Thin Solid Films,1984,114(3):257-269.
      [10] XU J, XIE Z H. Effect of Cr alloying on friction and wear of sputter-deposited nanocrystalline (MoxCr1-x)5Si3 films[J].Intermetallics,2011,19(8):1146-1156.
      [11] SHUM P W, ZHOU Z F, CHAN C Y. Mechanical and tribological properties of amorphous carbon films deposited on implanted steel substrates[J].Thin Solid Films,2004,458(1/2):203-211.
      [12] MUSIL J. Hard and superhard nanocomposite coatings[J].Surf Coat Technol,2000,125(1/3):322-330 .
      [13] ZHANG P, WANG L, NIE X. Tribological properties of a-C/Cr(N) coatings in micro-and nano-scales[J].Surf Coat Technol,2007,201(9/11):5176-5181.
      [14] BEMPORAD E, SEBASTIANI M, STAIA M H. Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate[J].Surf Coat Technol,2008,203(5/7):566-571.
      [15] 朱祖芳.有色金属的耐腐蚀性及其应用[M].北京: 化学工业出版社,1999:75-129.
    计量
    • 文章访问数:  4
    • HTML全文浏览量:  0
    • PDF下载量:  0
    • 被引次数: 0
    出版历程
    • 收稿日期:  2014-05-03
    • 刊出日期:  2014-07-19

    目录

      /

      返回文章
      返回