Page 50 - 电力与能源2023年第二期
P. 50
第 44 卷 第 2 期
电力与能源
144 2023 年 4 月
DOI:10.11973/dlyny202302010
重过载配变台区快速精准治理策略及实践应用
杨孟卓,童克彦,於冬雪,胡育铭,吴蓓婷
(国网上海市电力公司市北供电公司,上海 200072)
摘 要:为提高配变台区供电质量,提升电网安全经济运行水平,亟需研究适用于实际生产领域的重过载配变
台区快速精准治理策略。以夏峰及寒潮重过载台区为研究对象,明确治理目标,筛选治理对象,确定负荷割接
区间和电流割接区间,建立适用评价模型,并进行严重三相不平衡校验,制定了重过载配变台区快速精准治理
策略,最后通过实例对策略进行验证,同时形成标准作法,为供电企业开展重过载配变台区治理、落实配电网
精益化管理提供有效支撑。
关键词:配变台区;重过载;低压出线割接;严重三相不平衡校验;治理策略
作者简介:杨孟卓(1994—),女,硕士,工程师,主要从事配电网监测管控工作。
中图分类号:TM73 文献标志码:A 文章编号:2095-1256(2023)02-0144-06
Fast and Accurate Control Strategy and Practical Application for
Heavy Overload Distribution Area
YANG Mengzhuo,TONG Keyan,YU Dongxue,HU Yuming,WU Beiting
(State Grid Shibei Power Supply Company,SMEPC,Shanghai 200072,China)
Abstract:In order to improve the power supply quality of the distribution area and enhance the safe and economic
operation of the grid,it is urgent to study the fast and accurate control strategy of heavy overload distribution area
applicable to the actual production. In this paper,the heavy overload platform area of summer peak and cold tide
is taken as the research object,the control objectives are defined,the control targets are screened,the load
cutover interval and current cutover interval are determined,the applicable evaluation model is established,the se‑
rious three-phase unbalance check is carried out,and the fast and accurate governance strategy of the heavy over‑
load platform area is formulated. Finally,the strategy is verified by examples,and the standard practice is formed.
It provides effective support for power supply enterprises to carry out heavy overload distribution area governance
and implement lean management of distribution network.
Key words:distribution area,heavy overload,low-voltage outlet cutover,severe three-phase unbalance check,
control strategy
配变台区重过载会对配电网的供电安全、供电 方法周期长、环节多,存在项目审批不通过等风
质量和经济运行产生不良影响,是低压配电网运行 险;轻重载配变更换方法耗费物力和时间,并且调
薄弱环节的主要表现之一。某公司供电区域分布广、 换轻载配变后相应区域用电发展受限。通过借鉴
[1]
居民用户占比高,台区重过载形势较为严峻 ,其中 传统同站翻仓调整方法,在负荷高峰时段开展多
配变台区占比 70%。配变台区以居民负荷为主,售 次实测,将偶然因素控制在最小程度;在决策过程
电侧居民数量多且较为集中,一旦发生故障,抢修时 中充分运用配变台区历史重过载采样数据;以效
间较长,负荷转供能力有限,容易引发舆情事件。 果最好作为选取割接仓位标准,在确保安全的前
目前,应用于生产实际的重过载配变台区治 提下,最大程度改善台区重过载的问题 [4-6] 。
[2]
[3]
理方法 主要有配变同站翻仓、建设改造 和轻重
1 配变台区重过载治理目标确定
载配变更换等。其中,配变同站翻仓方法思路较
为保守,对重过载台区的改善程度有限;建设改造 站内负荷调整治理法的工作目标在于尽可能

