Page 90 - 电力与能源2024年第三期
P. 90
第 45 卷 第 3 期
电力与能源
364 2024 年 6 月
DOI:10.11973/dlyny202403017
燃气轮机改造节能量计算方法研究
黄伟栋 ,戴坤鹏 2
1
(1. 上海漕泾热电有限责任公司,上海 201507;
2. 上海明华电力科技有限公司,上海 200090)
摘 要:采用新技术、新方法对火电机组进行改造可提高机组的经济性。燃气轮机联合循环机组改造后,在对
节能量评估的过程中,由于燃气轮机性能受环境因素影响较大,准确合理地计算节能量往往比较困难。针对
这一问题,提出了一种基于进口可转导叶(IGV)角度判断负荷率的节能量计算方法,该方法将机组年发电量
进行统计分析,划分多个负荷段,在每个负荷段分别计算节能量并求和得到总的节能量。案例计算结果表明,
相较于传统计算方法,使用所提出方法计算的节能量增加了 4 929 t 标煤,能够更真实地反映机组改造的节能
效果。
关键词:节能量;负荷段;GV 角度
I
作者简介:黄伟栋(1986—),男,硕士,工程师,主要从事燃气轮机联合循环机组的技术管理和优化运行方面
研究。
中图分类号:TM611.31 文献标志码:A 文章编号:2095-1256(2024)03-0364-04
Energy Saving Calculation Method for Gas Turbine Retrofit
1
HUANG Weidong ,DAI Kunpeng 2
(1. Shanghai Caojing Thermal Power Co.,Ltd.,Shanghai 201507,China;
2.Shanghai Minghua Electric Power Technology Co.,Ltd.,Shanghai 200090,China)
Abstract:The economic efficiency of power generation units can be improved by adopting new technologies and
methods for retrofitting. In the process of evaluating energy-saving potential for the economic retrofit of gas tur⁃
bine combined cycle units, it is often difficult to accurately and reasonably calculate the energy-saving potential
due to the significant influence of environmental factors on gas turbine performance. To address this issue, a
method for calculating energy-saving potential based on the angle of Inlet Guide Vanes (IGV) to judge the load
rate is proposed. The annual power generation of the unit is statistically analyzed, and multiple load segments are
divided. The energy-saving potential is calculated separately for each load segment, and the total energy-saving
potential is obtained by summing up. Case study results show that compared to traditional calculation methods,
the calculated energy-saving potential increased by 4929 tons of standard coal, which can truly reflect the energy-
saving effect of unit retrofitting.
Key words:energy-saving quantity,load segment,IGV angle
随着 “双碳”目标的提出,我国对节能减排更 泵结合,实现余热制冷或制热,可进一步将余热利
加重视,各大燃气轮机厂商纷纷提出了提高燃气 用效率提高 8%~10% [1-2] 。
轮机效率、降低污染物排放的措施,例如 GE 公司 企业进行了节能改造,需对节能效果进行评
研 发 的 针 对 9F 燃 机 的 先 进 热 通 道 改 造 技 术 、 价,《节能量测量和验证技术通则》是开展节能量
DLN2.6+低氮燃烧技术等。对于联合循环的余 测量和验证的基础规则,其给出了节能量的相关
热,大部分通过余热锅炉回收利用,余热烟气深度 定义和计算方法等 [3-4] 。文献[5-6]分析了现有燃
利用也是目前研究的一个主要方向,通过表面式 煤机组和热电联产机组节能量计算方法的缺陷,
换热回收余热烟气中的热量和水,再与吸收式热 并有针对性地提出了积分平均算法和回归算法,